ReviewsEpoxy Primer 2

primer spray paint for truck-Samurai Epoxy primer paint Professional spray paint for Truck Bed Liner ,repairing protection truck bed primer paint for car /truck bed liner and more (Granular Textured Primer White, Pack of 2 Cans)

  • One aerosol can system combines both Epoxy and paint solution. Provide a tought and textured protective coating that can an tolerate extreme climatic temperature conditions.It is heat, UV resistant and waterproof, so it protects coated surfaces from rustand won't chip, flake or peel..
  • Heavy duty Epoxy Primer for a smooth uniform surface, hide any minor imperfections, fill surface defects or irregularities prior to application of Truck Bed Coating. Greater adhesion, bonding than 1-part paint..
  • 1 (one) can of our Truck Bed Epoxy Primer can cover surface area about 17 to 20 ft² with 2 coats. Formulated specifically to enable skilled amateur DIYers to achieve professional quality results with ease. Suitable for truck bed liner,or other Metal, Concrete, Wood, Fiberglass, Rubber..
Check Stock

primer spray paint for truck-Samurai Epoxy primer paint Professional spray paint for Truck Bed Liner ,repairing protection truck bed primer paint for car /truck bed liner and more(Granular Textured Primer Black, Pack of 1 Can)

  • One aerosol can system combines both Epoxy and paint solution. Provide a tought and textured protective coating that can an tolerate extreme climatic temperature conditions.It is heat, UV resistant and waterproof, so it protects coated surfaces from rustand won't chip, flake or peel..
  • Heavy duty Epoxy Primer for a smooth uniform surface, hide any minor imperfections, fill surface defects or irregularities prior to application of Truck Bed Coating. Greater adhesion, bonding than 1-part paint..
  • 1 (one) can of our Truck Bed Epoxy Primer can cover surface area about 17 to 20 ft² with 2 coats. Formulated specifically to enable skilled amateur DIYers to achieve professional quality results with ease. Suitable for truck bed liner,or other Metal, Concrete, Wood, Fiberglass, Rubber..
Check Stock

TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood (Gray, Quart)

  • ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
  • for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition.
  • COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
  • apply a second coat only if a higher build is needed.
  • to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer.
  • EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
  • boat primer is chromate-free and lead-free.
  • DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
  • marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint.
  • AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
  • do not apply Topside Primer thicker than recommended or it may not cure properly.
Check Stock

Evercoat Super Build 4:1 Polyester Primer Surfacer for Aluminum, Fiberglass & More - 128 Fl Oz

  • High-Quality Primer Surfacer: Exceptional filling capabilities and patented 4:1 mix ratio technology.
  • Easy Sanding: Use 180, 220, and 320 grit sandpaper, depending on the surface.
  • Safe Automotive Primer: This epoxy primer is compatible with waterborne paint and VOC-compliant.
  • Versatile Surfaces Application: Our products are applicable on SMC, aluminum, fiberglass, and more.
  • Automotive Body Repair: We provide high-quality putty, primer, and body filler formulations.
Check Stock

DTM 2.1 voc Grey Urethane Primer & Sealer gallon kit, 4:1 mix, SS-2000G/SMR-222

  • Epoxy Fast Dry 2.1 low voc DTM Primer & Sealer Gray.
  • Easy 4:1 mix primer with optional 5-10% reduction with 0 voc reducer (SMR_0075).
  • Excellent adhesion and corrosion resistance.
  • Great adhesion to Steel, Aluminum, Fiberglass, Body fillers and Existing finishes.
  • Lays down super smooth at 4:1 or with optional 5-10% 0 voc reducer (SMR-0075).
Check Stock

Epoxy Fast Dry 2.1 low voc DTM Primer & Sealer Gray Quart Kit, SMR-260G-Q/261-8

  • Epoxy Fast Dry 2.1 low voc DTM Primer & Sealer Gray.
  • Easy 4:1 mix primer with optional 5-10% reduction with 0 voc reducer (SMR_0075).
  • Excellent adhesion and corrosion resistance.
  • Great adhesion to Steel, Aluminum, Fiberglass, Body fillers and Existing finishes.
  • Lays down super smooth at 4:1 or with optional 5-10% 0 voc reducer (SMR-0075).
Check Stock

KILZ Restoration Primer, Interior, 5 Gallon

  • PRIMER | SEALER | STAINBLOCKER: KILZ RESTORATION Primer (Formerly KILZ MAX) is a new generation water-based primer, sealer and stainblocker offering performance of traditional oil and shellac-based primers. It blocks tough stains and odors and provides superior adhesion. Ideal for restoration and disaster recovery painting jobs..
  • ADVANCED FORMULA: The innovative modified acrylic epoxy formula provides superior adhesion and the performance of oil-based and shellac primers with the easy clean-up, low odor and low VOC of water-based. This formula also dries hard and sands easily which makes for a great enamel undercoater..
  • MULTIPLE SURFACES: Use on most interior surfaces including drywall, wood, plaster, masonry, brick, painted metal, ceramic tile, glass and most other glossy surfaces. Surfaces should be free of dust, grease, chalk, rust and peeling paint prior to application. Use as a subcoat for flooring and carpets to block pet odors. Works with oil, alkyd and water-based paints..
  • SUPERIOR COVERAGE: This 5-gallon pail of KILZ RESTORATION interior latex primer covers approximately 1,500-2,000 square feet per gallon. Dries to....
Check Stock

Louie's Backyard Cookbook: Irrisistible Island Dishes and the Best Ocean View in Key West (Roadfood Cookbook)

  • ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
  • for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition.
  • COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
  • apply a second coat only if a higher build is needed.
  • to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer.
  • EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
  • boat primer is chromate-free and lead-free.
  • DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
  • marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint.
  • AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
  • do not apply Topside Primer thicker than recommended or it may not cure properly.
Check Stock

Custom Shop Premium High Build Acrylic Lacquer Primer Surfacer, 1 Gallon - Fast Filling, Drying, Easy Sanding, Excellent Adhesion - Apply Over Metal Steel, Body Filler Putties, Automotive Industrial

  • 1 Gallon (3.8 Liters) Can of Custom Shop Premium High Build 2.1 VOC Acrylic Lacquer Primer Surfacer. Gray primer color. Mix Ratio is 1 to 1 with RSP XR Reducers for 2.1 VOC California Compliance or RSP LT70 Lacquer Thinner for National Rule Compliance..
  • High Build 2.1 VOC Acrylic Lacquer Primer Surfacer is a premium, lead-free primer surfacer that provides outstanding build for fast filling without shrinkage when used as directed. It can be easily sanded, wet or dry, to a fine feather-edge and offers excellent adhesion and color holdout..
  • It provides excellent adhesion over properly prepared substrates: metal, steel, aluminum, fiberglass, previously painted surfaces, epoxy, and self-etch primers, body filler, glazing putties, and more. It’s an ideal primer for automotive vehicles, fleet, industrial products, and OEM manufacturers..
  • Restoration Shop and Custom Shop have been providing innovative Premium Quality products you can trust in the Automotive Paint Industry since 1974. Our products are proudly Made in the U.S.A., and we formulate, manufacture, and distribute our products throughout the USA, unlike many competitors..
  • Our superior coating products only use the highest quality ingredients, which allows our customers to consistently achieve high-qu....
Check Stock

EpoxySheild by Rustoleum 251870 2½ Car Gray Garage Floor Coating Kit2

  • ...ywood, Concrete, Bar tops. We offer a high volume quantity of epoxy at a very low price in every kit sold. Rollers, buckets, mixers etc. can be purchased separately online or in box stores. Our epoxies are packaged and sold 3 ways..
  • Our 2 part epoxies should be used as the primer and the finish coat all in one. No need to purchase additional special primers. Colored Epoxies manufactures Heavy duty industrial grade epoxies and curatives offering a life time against cracking, peeling, chipping and hot tire pick up. We our epoxy strength whether its rolled out at 3 mills or notched squeegeed out at 10 mills same strength and durability. Our epoxy does not need to be measured out by thickness for durability..
Check Stock

TP Tools 2K Direct-to-Metal (DTM) Epoxy Primer/Sealer - Gray, Quart #TP-1094

  • Good choice for complete or partial refinish work. Use when stripping entire panels or complete cars..
  • 2K epoxy primer/sealer is an isocyanate-free product designed to be used as a corrosion-resistant primer. It dries fast and provides very good topcoat holdout. Provides excellent adhesion to properly prepared steel, aluminum, factory finishes, fiberglass, and plastics. Can be topcoated with color or with 2K urethane primer. Sand and clean all surfaces prior to application..
  • 1:1 mix ratio (1 part primer to 1 part required TP Tools Activator - sold separately). Thin with urethane reducer - sold separately. Spray with 1.4 to 1.8 mm..
  • CAUTION - Respiratory Protection is required when painting. Not included..
Check Stock