ReviewsEps Cnc Cutting Machine

Comgrow ROBO Table CNC Router Machine with GRBL Offline Control,3-Axis Engraving Milling Machine 300x180x45mm Working Area for Carving Cutting Plastic Acrylic PCB PVC Wood Aluminum brass

【Upgrade Comgrow CNC ROBO 】Comgrow cnc router 3 Axis 42 stepper motor are X/Y/Z Axis power, the axis moves more smoothly. 775 spindle motor up to 10000r/min. and comes with short circuit protection, no need to worry about module damage..
【CUSTOMISED SETTINGS】Metal CNC machine cutter Full Aluminum Alloy tray Working area: 30x18x4.5CM. Meets most of the engraving needs.
【AUTOMATIC TOOL-SETTING】CNC Router for metal aluminum copper can calibrate the zero of the Z axis autonomously, with the functioning of embedded sensors During the engraving process, there is no need to manually adjust the height of the Z axis to make the drill touch the surface of the engraved object.
【 a wide range of projects and materials】the comgrow cnc router machine Capable of cutting and engraving all types of plastics, soft aluminum, Copper, woods, acrylics, PVCs, PCBs and MDF, the setting parameters of different materials can refer to the product page below middle"".
【more Simply Assemble and Use】This table cnc router machine kit is mainly designed for DIY carving enthusiasts/beginners, easily assembled and opertated, coming with a paper manual and SD Card of all the files. Please let us know if you need any help ..

Check Stock

SpeTool 5PCS 2 Flutes Square Nose End Mill Set Power Milling Machine Carbide Upcut CNC Router Bits Tiain Coated, 1/4 inch Shank, 2 1/2 inches Long Overall

Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
Flat Top with 2-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55.
For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc.
The Endmill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..

Check Stock

Kodiak Cutting Tools KCT133263 USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 1/8\ Shank, 1/2\ Length of Cut, 1-1/2\ Overall Length, 1/8\ Diameter

Solid Carbide Spiral Router Bit with 5/16 inch Shank and 5/16 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55.
For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc.
The Route Bit Suit for CNC Router and the Brand Plunge Router with 5/16" Collet.
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..

Check Stock

uxcell Spotting Drill Bits 5mm Dia 5mm Shank 60 Degree Solid Carbide AlTiSin Coated 2 Flutes Round Shank Drilling Cutter

Spotting Drill Bits: Cutting Edge Diameter: 5mm / 0.2".
Total Length : 50mm / 2.0". Large spiral flutes provide neat and smooth cuts. Spiral groove facilitates the export of metal chip..
Wide Applications: Widely used for drilling steel below HRC60, such as stainless steel, carbon steel, die steel, alloy steel. The AlTiSin composite coating has high hardness, high wear resistance and high thermal stability..
Carbide Tool: Made of fine-grained tungsten carbide, the drill bit has good toughness, high hardness (HRC92), wear resistance and heat resistance. With good cutting strength and drilling effect, carbide tool offers long tool life and faster cutting speeds than other substrates..
Easy to Use: Universal chamfered round shank, easier clamping, stable cutting process. Suitable for CNC machining centers, CNC machine tools, precision engraving machines and other equipment. The longer the length of the tool clamped by the chuck, the better..
Tips: If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance..

Check Stock

MTX GENERAL-10 Amplified 10 Inch Subwoofer Enclosure Sound System for UTV Polaris General 2016 to 2018 1000 EPS 4 1000 EPS 1000 EPS Hunter Edition and 1000 EPS Ride Command Edition

FITS POLARIS GENERAL MODELS: 1000 EPS 2016-2018, 4 1000 EPS 2016-2018, 1000 EPS Hunter Edition 2016-2018, and 1000 EPS Ride Command Edition 2016-2018.
BUILT-IN CLASS D AMPLIFIER: Easy installation as the integrated 250-watt RMS class D amplifier only requires power and signal.
EXTERNAL GAIN CONTROL: Low-level input with external gain control gives you power over the quality of the bass sound.
10-INCH SUBWOOFER: High-efficiency 10-inch polypropylene subwoofer produces quality low-end bass to give your sound system more range.
NO CUTTING OR DRILLING TO INSTALL: Mounts in center console with no cutting or drilling required and is invisible once installed.

Check Stock

Radius 0.5 1 1.5 2 2.5 3 Ball Nose Carbide End Mill Set CNC Cutter Router Bits 2 Flute Spiral Milling Tool

0.5-3mm Ball Nose Carbide End Mill: This end mill set includes 6 Radius sizes of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, satisfy your different needs..
Material: Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45..
Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide..
For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc..

Check Stock

Baoblaze CNC Spoilboard Surfacing Router Bit 1/4 inch Shank Carbide Tipped Surface Planing Cleaning Cutter Slab Flattening Router Bit Wood Milling Cutter 6.35mm shank

This professional "CNC Spoilboard Surfacing Router Bit" is not slab flattening, or plane the top surface of the spoilboard, but also for trimming and slotting/grooving..
4 flutes wood cnc router, Shank: 6.35mm 12mm 12.7mm.
Suitable s, mdf, laminate, particle board, plywood compact panel, acrylic and etc. avoid cutting metal and non materials..
Use on CNC and other automatic routers as well as hand-held and mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..

Check Stock

Masmoc 4\ Metal Handwheel Fit 1/2\ Shaft of Table Saw Drill Press Lathe Turning CNC, Round Hand Wheel Crank Come with Set Screws and Disassemble Handle

This handwheel is designed with consumer convenience in mind,the item provides everything you all need including 4pcs SET SCREWS (2PCS is the backup one) and installing hex key wrench. Insert the shaft into the hole in the handle hub and tighten the provided set screw and a solid construction immediately is finished.It doesn't matter if the shaft is star, key-way, hexagonal, or smaller than 1/2”.
Handwheel Total Diameter: 100 mm / 4 inch, Center Bore Diameter (approx.): 12 mm / 1/2 inch. The package comes with 1 pcs round handwheel, 1pcs handle,4PCS SET SCREWS, 1pcs hex key wrench.
The hand crank wheel is made of metal material and the handle is made of high quality phenolic resin, with strong insulation and durability.
Masmoc handwheels is fit for 1/2” or smaller shaft but it can be expanded to expand the scope of use.
Widely used in industrial machine tools, such as Universal or horizontal - handle crank wheel on CNC milling machine bed.Universal or horizontal - handle crank wheel on CNC milling machine bed,Surface rotary Grinder Machine, Cylindical grinder, sharing machine,Boring machine, profile cutting machine, Turning CNC,Table saw, Band saw, Radial arm saw, Contractor saw, Cabinet Saw.

Check Stock

CNC Spoilboard Surfacing Router Bits 1/2 inch Shank 2 inch Cutting Diameter Slab Flattening Router Bit Planing Bit Wood Milling Cutter Planer Woodworking Tool by BINSTAK Carbide

3 WINGS WOOD CNC ROUTER BIT: Shank: 1/2".
HIGH QUALITY CNC SURFACING ROUTER BIT: The sharp carbide tipped bit, solid hardened steel bodies with anti-kickback design. Build up with heat resistant Teflon coating which can reduce resin build-up for fast and easy cleaning. This CNC router bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications, BINSTAK router bit can withstand some heavy duty use and the test of time..
VERSATILE WOODWORKING TOOlS: This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving. Great replacement bit tool for woodworking carpenter!.
USE RANGE for CNC ROUTER BIT: Suitable for solid woods, mdf, laminate, particle board, plywood compact panel, acrylic and etc. Avoid cutting metal and non-wood materials..
Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine..

Check Stock

CNC Spoilboard Surfacing Router Bits, 1/4 inch Shank 1 inch Cutting Diameter, Slab Flattening Router Bit Planing Bit Wood Planing Bit Dado Planer Bit by BINSTAK (Carbide)

3 WINGS WOOD CNC ROUTER BIT: Shank: 1/4”.
HIGH QUALITY CNC SURFACING ROUTER BIT: The sharp carbide tipped bit, solid hardened steel bodies with anti-kickback design. Build up with heat resistant Teflon coating which can reduce resin build-up for fast and easy cleaning. This CNC router bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications, BINSTAK router bit can withstand some heavy duty use and the test of time..
VERSATILE ROUTING TOOl: This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving. Great replacement bit tool for woodworking carpenter!.
USE RANGE for CNC ROUTING BITS: Suitable for solid woods, MDF, laminate, particle board, plywood compact panel, acrylic and etc. Avoid cutting metal and non-wood materials..
Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine..

Check Stock

VEVOR CNC Router Machine 3018-PRO w/GRBL Offline Control Limit Switches & Emergency-Stop PCB PVC Wood leather Engraving Machine Dustproof Safe Acrylic Baffle XYZ Working Area 300 x 180 x 45mm

GRBL Offline Controller: This cutting machine has an independent GRBL controller. The operable 1.8" display can adjust the XYZ axes and manually turn....
Double Security Design: This CNC router machine features two 5mm acrylic baffles on each side, so you can safely monitor the engraving process and....
High Hardness & Precision: This CNC 3018-PRO is constructed with an aluminum alloy frame and three refined XYZ axes, featuring corrosion resistance....
Efficient Pre-assembly: For your convenience, we have assembled the basic frame in advance to save your time. With the detailed user manual and....
Extensive Application: This CNC 3018-PRO machine comes with 20 pcs drill bits, featuring high strength, high precision, and outstanding performance,....

Check Stock