Accusize Industrial Tools ER40 Collet Chuck Extension Rod, 2.56 in. Shank Length, 1 in. Straight Shank Alloy Steel, 0223-0213
- Made of high-quality alloy steel. Hardened to HRC 56-60.
ReviewsEr Collet
Tegara BT30 ER16 60mm Collet Chuck Tool Holder 4 pcs 202-6522-4 M[
- TIR (in): 0.0001, Max RPM Balanced to: G2.5 20,000.
MABUARN ER Spring Collet ER11 ER16 ER20 ER25 Set with Plastic Case for CNC Lathe Engraving and Milling Tool Workholding Chuck ER16 AA 13PCS
- Material: The ER spring collet set is made of high quality 65Mn spring steel with high wear resistance and durable characteristic..
- High performance: The run-out tolerance of AA type is less than 0.0003"..
- Application: It's suitable for CNC, engraving machines and other equipment. Used in milling, boring, drilling, wire tapping and other operations,.
- Gripping range: --ER11 10PCS (1/16", 5/64", 3/32", 7/64", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32").
- --ER16 13PCS (1/16", 5/64", 3/32", 7/64", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 3/8", 13/32").
- --ER20 15PCS (1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32". 5/16", 3/8", 13/32", 7/16", 15/32", 1/2").
- --ER25 20PCS (1/16", 5/64", 3/32", 7/64", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 9/16", 5/8", 3/4")..
- Package: ER11: 10pcs of collets with a strong plastic case.
- ER16: 13pcs of collets with a strong plastic case.
- ER20: 15pcs of collets with a strong plastic case.
- ER25: 20pcs of collets with a strong plastic case..
Tegara CAT40 ER20 3.0 in. Collet Chuck Tool Holder 4 pcs 202-1588-4 M[
- Collet Series: ER20, Collet Nut Diameter: 1.38.
- TIR (in): 0.0001, Max RPM Balanced to: G2.5 20,000.
SANON 15pcs ER20 Spring Collet Set for CNC Engraving Machine, Milling Lathe Tool Workholding Engraving 1-13mm(1/25\-1/2\)
- 【Gripping Range】15Pcs ER20 Spring Collet Set includes the following collet sizes:1/25.
CNC Spindle, MYSWEETY 500W Air Cooled 0.5kw Milling Motor and Spindle Speed Power Converter and 52mm Clamp and 13pcs ER11 Collet for DIY Engraving
- ️【CNC Spindle kit 500W】- 1 x 500W Air-Cooled Spindle Motor, 1 x AC110V/220V Speed Governor with MACH3, 1 x 52mm Mount bracket, 13 x ER11 collect, 10 x V Bit Cutter, 4 x Screws(free)..
- ️【500W CNC Spindle motor】- Operating voltage: 100VDC, Power: 500W, Input: AC110V, Speed: Up to idle up to 12,000 rev / min, Torque: 5000G/CM. Insulation resistance:> 2 megohms, Dielectric strength: 400V. Motor Length: 200MM, High precision spindle run out 0.01-0.03..
- ️【Speed Power Switch】- Input voltage: AC110V/220V, 50/60Hz. Output current peak: 6A. Output voltage: DC0-100V. Please install in the place that is draughty, no dramatic impact, no vibration, no explosion hazard medium, no conductive metal particle..
- ️【 52mm Mount Bracket】- Made of high quality cast aluminum, this spindle motor bracket clamp is strong and durable. Diameter: 52mm, Chuck portion length: 45MM, Chuck portion diameter: 16mm..
- ️【ER11 Collet Chuck】- 13Pcs ER11 Collet Set Gripping Range: 1MM to 7MM(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm). Run-out tolerance 0.01mm. For CNC milling Lathe Tool & Work holding Engraving machine..
Accusize Industrial Tools Morse Taper MT3 Shank Er32 Collet Chuck, Max 8000 Rpm, 1/2\-13 Drawbar End, Max TIR 0.0002'' O.D to I.D. 0223-0236
- Made of high grade tool steel, Max RPM: 8000rpm. ER Style, ER-32. Max TIR 0.0002" O.D. to I.D.
- Hardened and precision ground. Max TIR 0.0002" O.D to I.D.
- When testing, whether the user's machine tool spindle has errors on the accuracy also has a great impact. So you need to ensure that the accuracy of the spindle of the user's test machine must be high. In addition, please make sure that the accuracy of the ER collet must be high, many ER collets are marked as 0.0005.
RATTMMOTOR 110V Water Cooled Spindle Motor 2.2KW 80mm CNC Spindle Motor ER20 24000RPM 400HZ+2.2KW VFD Drive 110V Inverter Converter Spindle Motor Speed Controller+ER20 Collets for CNC Router Machine
- Notice: (1)The spindle speed can't be lower than 9000rpm!!!! (2) This spindle only supports clockwise rotation, not reverse rotation. (3)This Spindle....
- 【14pcs/set ER20 Collets】Size: 3.175mm,1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm..
New Lathe ER32 Woodworking Dowel Collet Chuck System 1/4 3/8 1/2 5/8 3/4 USA
- For 3/4″ x 16 Spindle Adapter & 5pcs ER32 collet.
- 5 Collets: 1/4-Inch, 3/8-Inch, 1/2-Inch, 5/8-Inch and 3/4-Inch.
- Excellent gripping for small diameter dowels and tenons.
- Perfectly designed to hold a pen mandrel, and other small wood projects where a tenon is used.
- 1-Inch by 8TPI thread with 3/4-Inch by 16TPI spindle adapter, with collet closing head.
CNC Spindle Motor Kits Square 110V 1.5KW Air Cooled Spindle Motor 1.5KW VDF 2.75Inch bruches 40Inch Electric Wire,13 pcs ER11 Collets for CNC Router Engraving Milling Machine
- ✅Technical Parameters: Spec: Φ3.13-9.4inin (Diameter: 5.4cm x Length: 23.9cm).
- ✅Air Cooled Spindle: High-speed electric main bearings used in all C class high-speed angular contact ball bearings, axial pre-load feature,....
- ✅Package include: Square Spindle Motor, Inverter, ER11 Collet.
- Drill Bits, electric wire. Our air cooled spindle is widely engrave for wood,....
- ✅Support: We offer 1 year warranty. If you get stuck, contact us with any questions that arise, our customer service team are waiting for helping....
TINVHY C1-ER32-100L Straight Shank Collet Chuck Holder CNC Milling Tool Holder Alloy Steel Chuck Holder 25.4 mm shank Holder
- 25.4 mm shank holding all ER32 collets (Clamping range up to 20mm).
- Milling lathe collet chuck holder, high grade DN65 carbon steel material, straight shank, clamping nut, toughened and precision ground.
- C1 ER32 Straight shank type extended handle, the handle body was longer. The surface is quite smooth which offers a comfortable feeling and nice appearance.
- Widely used in boring, milling, drilling, tapping, grinding and other processing.