ReviewsEr Collet Holder

Accusize Industrial Tools Mt3 Shank Er32 Chuck with 11Pc Collets Kit 1/8 - 3/4 by 16Th Morse Taper Collet System 0223-0304

11pc ER32 collet set : 1/8" - 3/4" by 16th (1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"). For machining tools such as end....
All collets are made of high quality alloy spring steel. 0.0005" accuracy..
1pc MT3 shank ER32 collet chuck. Drawbar threads 1/2" x 13.
1pc ER32 spanner. Run-out Tolerance: 0.0005"..
Hardened and precision ground. The actual runout is 0.00031".

SPRING STEEL ER11 COLLETS SET: The Spring Collet is made of high quality spring steel, they are stable in performance.
HIGH PRECISION SPRING COLLETS SET: Fine workmanship, good elasticity, high precision.
WORKHOLDING ENGRAVING COLLETS: Collet must be placed into collet chuck nut before inserting into collet chuck.
INDIVIDUALLY PACKAGED COLLET SET: Each collet is well packed in separate protective container with label.
WIDE APPLICATION SPRING COLLET: The Collet Set is suitable for CNC milling lathe tool and work-holding engraving machine.

Technical Parameters: Spec: φ3.15 x 8.5 in (Diameter: 8 cm x Length: 21.5 cm).
ER20 Standard Collet: The collet of the CNC spindle is quenched with manganese steel, and the runout is less than 0.005 mm, which has high precision....
Powerful Bearing: The water cooled spindle motor adopts imported bearings with high accuracy, precision, and durability. Significantly improve the....
Low Noise & Heat Dissipation: The dynamic balance technology can effectively reduce the noise during use. The scientifically designed water....
Fine Workmanship: The body of the CNC router spindle is made of high-quality stainless steel, equipped with a pure copper rotor. The upgraded version....

【Brussless Spindle Motor】Power: 400W.
Note: Please see clearly that this spindle motor output shaft is with ER8 collet,and output shaft is complete shaft, can't be exchanged to ER11, ER16....
【Brussless Spindle Motor Driver】Maximum driver power: 600W.
Maximum driver motor running speed: 12000R/Min.
Brushless spindle driver（Model Name: NVBDL）is specialized for the ecomomic engraving machine,it matchs with the brushless DC motor. With the....
The users can take down the panel from the main driver and install it on the controller cabinet.By the panel,you can set the parameter,control motor....

This is a threaded adapter to fit the Milwaukee M12 Polisher / sander. The adapter has m9x0.75 threads on one end and has an ER11 collet cavity on the....
Please read this carefully: This listing is for the threaded adapter, one collet nut, one 1/8" collet and one 1/4" collet only..
This does not include the M12 polisher, the grinding stone, wire wheel and Milwaukee polisher are not included and are for illustration purposes only..

Technical Parameters: Spec: φ3 x 13 in (Diameter: 7.5 cm x Length: 33.9 cm).
ER25 Standard Collet: The collet of the CNC router spindle is quenched with manganese steel, and the runout is less than 0.002mm, which has high....
Powerful Bearing: The air spindle motor adopts imported bearings with high accuracy, precision, and durability. Significantly improve the hardness and....
Low Noise & Heat Dissipation: The dynamic balance technology can effectively reduce the noise during use. The scientifically designed air cooling....
Wide Application: The CNC spindle motor kit is mainly used for engraving machines or frequency converters. It uses air circulation to cool the heat....

☀ [FEATURE] --- ER straight extension rod, long shaft, suitable for deep hole machining. Straight-type handle body for holding small drilling, milling tools..
☀ [PRACTICALITY] --- You can reduce the use of longer tools, which can reduce costs and improve efficiency. Stable diameter, other parts have been accurate ground to eliminate imbalance..
☀ [HIGH STRENGTH] --- ER32 Collet Holder is made of durable carbon steel, high accurate, tighten the nut straight, high rigidity, strong clamping..
☀ [APPLICATION] --- Mainly used for various types of drilling and milling machine, spindle Morse taper machine..
☀ [QUALITY ASSURENCE] --- If you have any question or need some suggestion about the products we sold, please feel free to contact us, we will provide you with quality after-sales service..

STRAIGHT SHANK: Straight shank type extended handle, the handle body was longer,the shank is 100mm long..
ALLOY STEEL: This ER32 collet holder is made of high quality chrome molybdenum alloy steel, this chuck holder is durable..
EXTEND THE DEPTH: Applicable to deep hole processing, resolve to extend the depth of processing needs..
CONVENIENT TIGHTEN: The nut can direct tighten, high rigidity and strong clamping force..
SMOOTH SURFACE: The surface is quite smooth without glitches which offers a comfortable feeling, safe for your hands..

DURABLE MATERIALS: Made of 40Cr and carbon steel materials, with carburizing and quenching process, high hardness and strength..
INTEGRATED FORMING: The inside and outside of the tool holder are integrally formed, fine control processing, with stable performance..
HIGH ACCURACY: Inner hole grinding treatment, has high concentricity, suitable for high accuracy machine tool processing..
CLAMPING RANGE: The clamping range of the extension rod is 1‑7mm, standard in size, and it is suitable for ER11 collet..
WITH WRENCH: Equipped with a wrench, stable in processing, and can effective vibration suppression..

DURABLE MATERIALS: Made of 40Cr and carbon steel materials, with carburizing and quenching process, high hardness and strength..
INTEGRATED FORMING: The inside and outside of the tool holder are integrally formed, fine control processing, with stable performance..
HIGH ACCURACY: Inner hole grinding treatment, has high concentricity, suitable for high accuracy machine tool processing..
CLAMPING RANGE: The clamping range of the extension rod is 1‑7mm, standard in size, and it is suitable for ER11 collet..
WITH WRENCH: Equipped with a wrench, stable in processing, and can effective vibration suppression..