ReviewsEr Collet Set

RATTMMOTOR 110V Water Cooled Spindle Motor 2.2KW 80mm CNC Spindle Motor ER20 24000RPM 400HZ+2.2KW VFD Drive 110V Inverter Converter Spindle Motor Speed Controller+ER20 Collets for CNC Router Machine

Notice: (1)The spindle speed can't be lower than 9000rpm!!!! (2) This spindle only supports clockwise rotation, not reverse rotation. (3)This Spindle....
【14pcs/set ER20 Collets】Size: 3.175mm,1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm..

️【CNC Spindle kit 500W】- 1 x 500W Air-Cooled Spindle Motor, 1 x AC110V/220V Speed Governor with MACH3, 1 x 52mm Mount bracket, 13 x ER11 collect, 10 x V Bit Cutter, 4 x Screws(free)..
️【500W CNC Spindle motor】- Operating voltage: 100VDC, Power: 500W, Input: AC110V, Speed: Up to idle up to 12,000 rev / min, Torque: 5000G/CM. Insulation resistance:> 2 megohms, Dielectric strength: 400V. Motor Length: 200MM, High precision spindle run out 0.01-0.03..
️【Speed Power Switch】- Input voltage: AC110V/220V, 50/60Hz. Output current peak: 6A. Output voltage: DC0-100V. Please install in the place that is draughty, no dramatic impact, no vibration, no explosion hazard medium, no conductive metal particle..
️【 52mm Mount Bracket】- Made of high quality cast aluminum, this spindle motor bracket clamp is strong and durable. Diameter: 52mm, Chuck portion length: 45MM, Chuck portion diameter: 16mm..
️【ER11 Collet Chuck】- 13Pcs ER11 Collet Set Gripping Range: 1MM to 7MM(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm). Run-out tolerance 0.01mm. For CNC milling Lathe Tool & Work holding Engraving machine..

This is a threaded adapter to fit the Milwaukee M12 Polisher / sander. The adapter has m9x0.75 threads on one end and has an ER11 collet cavity on the....
Please read this carefully: This listing is for the threaded adapter, one collet nut, one 1/8" collet and one 1/4" collet only..
This does not include the M12 polisher, the grinding stone, wire wheel and Milwaukee polisher are not included and are for illustration purposes only..

ER-32 Collet Chucks Block Set Square and Hex.
Made of hardened tool steel, high strength and hardness.
For parallel, square or hex shapes as well as for cross hole drilling at 60, 90 or 120 degrees.
Precision manufacturing, high machining accuracy, ground to 0.0005 inch flatness.
The threads of the collet nut are smooth for fast remove and installation.

♞【2.2KW Water Cooled Spindle Motor】Operating Speed:0-24000rpm.
♞【2.2KW Inverter VFD 110V】Input Voltage: 110V(+/-15%).
♞【80mm Clamp】Diameter: 80mm Material: Aluminum,Cast aluminum.
♞【80W Water Pump+6M Pipe】Pump length:3.2m.
♞【14Pcs ER20 collet】Full set including 1mm, 2mm, 3mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm.

Technical Parameters: Spec: φ3 x 13 in (Diameter: 7.5 cm x Length: 33.9 cm).
ER25 Standard Collet: The collet of the CNC router spindle is quenched with manganese steel, and the runout is less than 0.002mm, which has high....
Powerful Bearing: The air spindle motor adopts imported bearings with high accuracy, precision, and durability. Significantly improve the hardness and....
Low Noise & Heat Dissipation: The dynamic balance technology can effectively reduce the noise during use. The scientifically designed air cooling....
Wide Application: The CNC spindle motor kit is mainly used for engraving machines or frequency converters. It uses air circulation to cool the heat....

10 pcs ER16 chucks set includes the following collet sizes: 1/32'', 1/16'', 3/32'', 1/8'', 3/16'', 7/32'', 1/4'', 5/16'', 11/32'', 3/8''..
For powerful gripping and parallel clamping.