ReviewsEsd Coating

Wiha 32716 Bevel Wide Oval Head Precision Cutters

• ESD Safe Precision Cutters, Wide Oval Head, Bevel.

Wiha 32630 Long Flat Nose Pliers, 6.3-Inch

• ESD Prec Short Snipe (Chain) Nose Pliers.

Electronics Super Knips-ESD Handles

YHYZ 7pcs Precision Tweezers Set, Premium Anti-Static Stainless Steel ESD Tweezers Set Kit for Electronics, Sodlering, Jewelry, Craft, Laboratory Work, DIY (7PCS, Version) (7PCS, Version)

• 【 7PCS Precision Tweezers. Meet Your Different Needs 】 --- This electronics ESD tweezers set has 7PCS different tweezers to meet your different needs. These tweezer can be widely applied to PCB, repairing of watches, crafts, jewelry, electronics, laboratory work and so on..
• 【 Additonal ESD-17 ESD Precision Tweezer 】 --- Compared to other tweezer set, you will find our tweezer set includes additional ESD-17 tweezer. We find only one tweezer with curved tip can not meet our need, so we add aditional ESD-17 esd precise tweezer. More Tweezers, more convenient..
• 【 Precision Electronics ESD Tweezers 】 --- These ESD Precise tweezer set is made very well with sharp round pinted tip, sturdy and pricise, you even can use these tweezers to grab the hairs easily. Excellent choice for electronics, jewelry and crafts, medical and laboratory work,.
• 【 Antistatic, Resistant and Non Corrosive 】 --- Precision electronics tweezers Set is made of durable stainless steel with anti-static paint on the surface and is resistant to most acids and other corrosive substances. You will like these ESD precision tweezers !.
• 【No Risk Purchase】 --- We are willing to refund your payment or resend the replacement for any quality problems, just contact us. For any other....

KooMall 1Meg Ohm Safe Grounding Plug for Wrist Straps, Anti Static Mat, ESD Sensitive Device, Earth Outlet Socket Adapter for Antistatic Bracelets Wristband, Ground Cable Cord Wire (1xStuds+2xJacks)

• 【Professional ESD Plug】ESD Grounding Plug, Build in 1Meg ohm Safety Resistance, use for ESD Control. Perfect to work with anti static Mat ESD Wrist Strap, Grounding Cord. It comes with 2 banana Jacks and a 10 mm male studs..
• 【ESD Grounding Plug】The ESD Plugs comes with two insulating plastic pins and a metal grounding pin which keep Safe grounding even if there is a 120V Voltage in the Plug. You can use the Grounding Plug to ground if there is US Socket..
• 【Easy to Use】Grounding Adapter Earth Bonding plug is easy and more convenient to use in EPA. You can connect your wrist strap, ESD mat and any other ESD Devices. Don’t use Crocodile clip to clip metal or grounding wire any more since you don’t know if they are grounding or not..
• 【New Design】Anti static Plug is a new design with a Round Triangular Body makes it easy to insert and remove. It can be moved at any time if you need and don’t worry about damage it..
• 【Widely Application】 ESD Grounding plug is necessary and easy to combine to use with wrist strap and table or floor mat in electro-static control when Assembling or repairing electronic product such as smart phone, computer, tablet, sport watches, smart toy, IC circuit boards and other electronic devices repair..

MWRF Source ESD Mat Kit with Wrist Strap and Grounding Cord (18" x 47", Gray)

• ESD Mat Size: 18 Inches x 47 Inches x 0.06 Inches (Thickness).
• ESD Mat Surface Resistivity: 10e9 - 10e10 ohms.

Xcelite XPE700 Chromium Molybdenum Steel Electronics Screwdriver Set, 7-Piece

• The handle core is made of hard shockproof plastic for durability.
• The outer coating is soft rubber for comfort and slip resistance.
• ESD safe hard plastic core to protect sensitive components.
• The handles are ergonomically designed allowing sustained high torque.

Alphastat Table Mat Grounding Kit - Universal Snap Kit and 15' 1 Meg Male Low Profile Ground Cord

• TABLE MAT GROUND: A complete kit to install and ground ESD and Anti-Static table mats according to ANSI ESD S2020..
• THICK OR THIN MATS: The kit includes a Universal Snap Kit that can install a 10mm snap or stud into materials up to 0.375" thick mats. Comes with a low profile Common Point Ground Cord that snaps to the mat and provides two banana jack receptacles to ground two operators working at the station..
• EASY INSTALLATION: The snap kit is installed into the mat with Philips head screw driver. The ground cord connects to that snap and the opposite end is connected to the center screw of an outlet.
• MEETS ESD STANDARDS: A buried 1 meg resistor is included for safety. ESD Standards require 1 ground point per mat or every 10ft of ESD matting. Meets or exceeds requirements of ANSI ESD-S20.20 and ANSI/ESD S-6.1..
• Comes with a low profile Common Point Ground Cord that snaps to the mat and provides two banana jack receptacles to ground two operators working at the station..

Bertech ESD Anti-Static Table Mat Kit, 2 Ft x 4 Ft, Blue, Includes an ESD Wrist Strap and ESD Grounding Cord, MADE IN USA

• BLUE ESD TABLE MAT SPECS: Mat is 2 Feet (24 inches) wide x 4 Feet (48 inches) long x 0.094 inches thick. Comes with an ESD Anti-Static Wrist Strap and ESD Anti-Static Ground Cord. Mat already has a snap and is ready to be used out of the box with minimal assembly..
• HIGH QUALITY ESD ANTI-STATIC MATERIAL: Made of a blue color single layer homogenous polymer mix with ESD Anti-Static properties for various worksurfaces and tables..
• ESD ANTI-STATIC SPECS: Surface Resistivity (10e9 - 10e10 ohms).
• Service Temperature (-20 degrees F to 160 degrees F).
• ESD APPLICATIONS: Aerospace Assembly, Mobile Phone and Computer Repairs, Computer Technicians, Electronic Assembly, Fiber Optics Manufacturing, Hospitals, Server Setup, Electronics Manufacturing and Solar Industries..
• CHEMICAL RESISTANT: Resistant to degradation by organic/inorganic acids, reducing agents, detergent solutions, and alcohols..

ESD-Dissipative Mat Kit - Heat Resistant, Two Layer Natural Rubber - with a Wrist Strap, Grounding Cable, and Dual Bench Grounding (2.5ft x 2ft, True Green)

• ESD Mats meet the ESD work surface requirements of ANSI/ESD S20.20 and recommendation of ESD S4.1..
• Grounding Cable meets or exceeds requirements of ANSI ESD-S20.20 and ANSI/ESD S-6.1..
• Static dissipative materials are able to conduct electricity, but do so very slowly. Any built-up static charges dissipate without sudden discharge that can harm the internal structure of silicon circuits..
• Grounding: this material must be properly grounded for optimum electrical performance..

Powerstep boys 5040-03kg-blue-3 M Us Big Kid Insole, Blue, Youth Size 3-4 US

• ⚡ DESIGNED SPECIFICALLY FOR YOUR ESD APPROVED FOOTWEAR: The PowerStep ErgoShield ESD insoles were specifically designed to provide full contact electro-static dissipation (ESD). The cut outs at the ball of foot and heel of these insoles allow the conductive fibers in the material to transfer statitc electricity through the body to the shoe and ground..
• ⚡ FOOT PAIN PREVENTION AND RELIEF: By combinding premium cushioning and slight arch support, ErgoShield ESD insoles help improve foot function and alleviate heel and arch pain and sore aching feet. As the #1 Podiatrist recommended brand, our mission and purpose at PowerStep is to create a more comfortable and happier life for our customers. ~ The PowerStep Pain Free Life.
• ⚡ NEUTRAL ARCH SUPPORT | MODERATE CUSHIONING | LIGHT SUPPORT | MEDIUM ACTIVITY: The PowerStep ErgoShield ESD full-length insole provide light arch support without the hard arch supporting shell. With the cradling of the heel and arch, these work insoles do to limit excess stress on feet, ankles, joints and tendons..
• ⚡ RECOMMENDED FOR USE IN APPROVED ESD FOOTWEAR ONLY. Please make sure that the shoes you are using these insoles with are ESD approved..
• ⚡ PROUDLY MADE IN THE USA: Your 100% satisfaction is our #1 concern, and all ou....