ReviewsEsdprotection
MWRF Source ESD Mat Kit with Wrist Strap and Grounding Cord (18" x 47", Gray)
- ESD Mat Size: 18 Inches x 47 Inches x 0.06 Inches (Thickness).
- ESD Mat Surface Resistivity: 10e9 - 10e10 ohms.
Alphastat Table Mat Grounding Kit - Universal Snap Kit and 15' 1 Meg Male Low Profile Ground Cord
- TABLE MAT GROUND: A complete kit to install and ground ESD and Anti-Static table mats according to ANSI ESD S2020..
- THICK OR THIN MATS: The kit includes a Universal Snap Kit that can install a 10mm snap or stud into materials up to 0.375" thick mats. Comes with a low profile Common Point Ground Cord that snaps to the mat and provides two banana jack receptacles to ground two operators working at the station..
- EASY INSTALLATION: The snap kit is installed into the mat with Philips head screw driver. The ground cord connects to that snap and the opposite end is connected to the center screw of an outlet.
- MEETS ESD STANDARDS: A buried 1 meg resistor is included for safety. ESD Standards require 1 ground point per mat or every 10ft of ESD matting. Meets or exceeds requirements of ANSI ESD-S20.20 and ANSI/ESD S-6.1..
- Comes with a low profile Common Point Ground Cord that snaps to the mat and provides two banana jack receptacles to ground two operators working at the station..
Bertech ESD Anti-Static Table Mat Kit, 2 Ft x 4 Ft, Blue, Includes an ESD Wrist Strap and ESD Grounding Cord, MADE IN USA
- BLUE ESD TABLE MAT SPECS: Mat is 2 Feet (24 inches) wide x 4 Feet (48 inches) long x 0.094 inches thick. Comes with an ESD Anti-Static Wrist Strap and ESD Anti-Static Ground Cord. Mat already has a snap and is ready to be used out of the box with minimal assembly..
- HIGH QUALITY ESD ANTI-STATIC MATERIAL: Made of a blue color single layer homogenous polymer mix with ESD Anti-Static properties for various worksurfaces and tables..
- ESD ANTI-STATIC SPECS: Surface Resistivity (10e9 - 10e10 ohms).
- Service Temperature (-20 degrees F to 160 degrees F).
- ESD APPLICATIONS: Aerospace Assembly, Mobile Phone and Computer Repairs, Computer Technicians, Electronic Assembly, Fiber Optics Manufacturing, Hospitals, Server Setup, Electronics Manufacturing and Solar Industries..
- CHEMICAL RESISTANT: Resistant to degradation by organic/inorganic acids, reducing agents, detergent solutions, and alcohols..
ESD-Dissipative Mat Kit - Heat Resistant, Two Layer Natural Rubber - with a Wrist Strap, Grounding Cable, and Dual Bench Grounding (2.5ft x 2ft, True Green)
- ESD Mats meet the ESD work surface requirements of ANSI/ESD S20.20 and recommendation of ESD S4.1..
- Grounding Cable meets or exceeds requirements of ANSI ESD-S20.20 and ANSI/ESD S-6.1..
- Static dissipative materials are able to conduct electricity, but do so very slowly. Any built-up static charges dissipate without sudden discharge that can harm the internal structure of silicon circuits..
- Grounding: this material must be properly grounded for optimum electrical performance..
Powerstep boys 5040-03kg-blue-3 M Us Big Kid Insole, Blue, Youth Size 3-4 US
- ⚡ DESIGNED SPECIFICALLY FOR YOUR ESD APPROVED FOOTWEAR: The PowerStep ErgoShield ESD insoles were specifically designed to provide full contact electro-static dissipation (ESD). The cut outs at the ball of foot and heel of these insoles allow the conductive fibers in the material to transfer statitc electricity through the body to the shoe and ground..
- ⚡ FOOT PAIN PREVENTION AND RELIEF: By combinding premium cushioning and slight arch support, ErgoShield ESD insoles help improve foot function and alleviate heel and arch pain and sore aching feet. As the #1 Podiatrist recommended brand, our mission and purpose at PowerStep is to create a more comfortable and happier life for our customers. ~ The PowerStep Pain Free Life.
- ⚡ NEUTRAL ARCH SUPPORT | MODERATE CUSHIONING | LIGHT SUPPORT | MEDIUM ACTIVITY: The PowerStep ErgoShield ESD full-length insole provide light arch support without the hard arch supporting shell. With the cradling of the heel and arch, these work insoles do to limit excess stress on feet, ankles, joints and tendons..
- ⚡ RECOMMENDED FOR USE IN APPROVED ESD FOOTWEAR ONLY. Please make sure that the shoes you are using these insoles with are ESD approved..
- ⚡ PROUDLY MADE IN THE USA: Your 100% satisfaction is our #1 concern, and all ou....
Grounding Snap with ESD Grounding Plug for Universal Grounding Table Mat, Universal Snap Kit and 16ft Grounding Cord Makes Perfect Grounding Wire Kit in ESD Supplies, ESD Grounding Kit & Ground Cord
- Very easy to install. The anti static plug can be connected to all esd mats. Simple to poke a hole and put the bolt through to add the snap, makes sufficient electrical connection..
- Very handy for grounding earthing universal mat. Now you have the capability of installing a esd cord on any anti static mat or universal grounding mat..
- Grounding snap. Make yourself an ESD work station to prevent static electricity from damaging ESD sensitive components. For work on computers or sensitive devices.
- ESD grounding wire kit. Including a 16ft long 100K Ohm Grounding cord with grounding plug and screwdriver. It's a ground only plug with cord snap and a long earthing cable..
- No matter whether thin grounding mats or thick esd grounding mat. The ESD kit includes 2 washers. this means that the grounding button fits on every mat..
Atrix - VACO22VESD Omega Cordless ESD Safe Vacuum Immediate Containment Fine Filtration Vacuum
- ESD SAFE GROUNDED CANNISTER VACUUM - The Omega Cordless ESD vacuum VACO22VESD, is an excellent immediate containment option for cleaning static sensitive equipment such as computers, copiers, printers, data centers, ATM’s, gaming, banking, robotic and telecom applications..
- CORDLESS CANNISTER VACUUM - The cordless tool box structure makes this vacuum convenient for applications where corded versions are inconvenient or simply not an option. The brushless digital motor has 30 minute run time and 1 hour rechargeable battery.
- TONER AND DUST PARTICULATE FILTER - This product contains and is compatible with the Atrix 31700C Immediate Containment Fine Filtration Filter Cartridge and is 88% efficient at .3 micron and consists of 43 cellulose pleats. The ultrafine filter can capture toner, color toner, dust and debris..
- PACKED WITH ACCESSORIES - Includes Omega Cordless ESD Vac, VACOBAT- 22 Volt Battery, VACOCHG- Charger, 31700C Toner and Dust Filter, 31654 Crevice Tool, 31657 Tool, 31671STUD ESD Safe hose, 510-001-006 ESD Ground Cord,.
- POWERFUL YET QUITE CORDLESS ESD SAFE VACUUM - 67 Decibels, 22V Power, 190W, 40 CFM..
StaticTek 9010 Black Fabric ESD Safe Snap Cuffs Collar Jacket-Certified Level 3 Static Shielding Lab Coat and ESD Smock Jackets for Anti-Static Work Places,X-Large | TT_JKC9025SPBK
- MEDIUM-WEIGHT ESD JACKETS: Perfect for all working environments. Winter to summer and production shop to office. One jacket year round and in various places in your facility..
- EXTREMELY COMFORTABLE & DURABLE ESD PRODUCT: Still groundable and with consistent dissipative electrical readings even after 100 washing cycles.
- LEVEL 3 ESD JACKET: Complies with the highest ESD S20.20 standards. Garment may be worn in any of the 3 ESD program category level areas to minimize the risk of electro static discharge..
- TOP OF THE LINE QUALITY: Reliable Panel-to-Panel Continuity. A high level of repeatability gives peace of mind to the overall quality of your ESD program..
- GROUNDABLE ESD CLOTHING: With a low surface resistance of less than 10 to the 6 Ohms (003c10^6Ω) this conductive jacket will provide the highest level of electro static protection..
Safe ESD Anti Static Wrist Strap Band Long Earthing Wristband Ground Bracelet for Computer PC Building Electronics Grounding wire cord with Metal Alligator Clip By DREMINOVA
- ⚡ Durable and Resistant ESD anti-static Wrist Strap helps you to protect from dangerous electrostatic discharge, a necessary tool that makes easy the job from a PC building to Professional electronics repairs, Laptop, computer, or any other sensitive component, an ideal addition to your ESD equipment.
- ⚡ Adjustable Grounding wrist strap Fits Your Wrist Comfortably , 6Ft/1.8M long coiled cord for wide range of Movement, Protection resistance: 10^6Ω Safe ESD strap to prevent the electricity discharge.
- ⚡ Antistatic ESD Wrist Straps have a blue conductive strip attribute to strengthen protect you from static electricity, Easy to use they have a matal detachable alligator clip which reveals a banana plug if your setup requires that, or clip onto an Anti static mat to ensure work safety while you are working on Electronic Parts such as circuits projects, motherboard, hard drive, or Raspberry.
- ⚡ Ground bracelet with Removable grounded wire cord for Earthing protection allows you to connect to the earth through an Anti Static Socket Ring, Ground Connector, grounding probe, outlet earth adapter, or other grounding hardware that allows banana plugs. Washable Antistatic Wristbands Stay Clean and Electricity discharge Free.
Plato ESD-Safe Needle Flux & Liquid Dispensing Bottle - SF-02
- Low Density Polyethylene (LDPE) durAstatic liquid dispensing flux bottles with needle tips are safe to use around static sensitive components.
- ESD properties are embedded into the bottle and conductive cap for longer product life. Embossed with ESD protective symbol. Embossed with ESD protective symbol.
- Silicone Free - No migratory additives or surfactants to cause contamination or oily surface. Volume Resistance: 1 x 10E7 ohms to 003c 1 x 10E10 ohms per ANSI/ESD STD11.12.
- Available with 3 different needle tip sizes: 18, 20, 26 GA. Available in 2 colors: Blue and Yellow.
Mucinex Maximum Strength 12-Hour Chest Congestion Expectorant Tablets 14 Count
- Note: Does NOT Compatible with Cobra Vedetta / SLR Ultimate Detection Series..
- The sticky suction cups can be reused. Although powerful, the sticky suction cups are easy to remove and secure. Simply rinse the suction cup with a....
- Compatible with: Cobra 6-Band, 8-Band, 9-Band, 10-Band, 11-Band, 12-Band, 14-Band, 15-Band, 17-Band, SPX 5300, SPX 5400, SPX 5500, RAD 500G, RAD 450,....
- Compatible with all recent New Cobra XRS COBRA Radar Detector Models: Cobra ESD-6100, ESD-7000, ESD-7100, ESD-7400, XRS-9300, XRS-9330, XRS-9340,....
- Don't place the mount in or near the deployment area of the airbag, and don't install it in a position that obstructs road observation..