ReviewsEsp32 Compatible

DORHEA 5PCS ESP32 ESP-32S WiFi Development Board Unassembled NodeMCU-32S Microcontroller Processor Integrated Chip CP2102 Compatible with IDE

Dual core ESP-32 development board, 2.4GHz Dual Mode Development Board..
Ultra-Low power consumption,small volume, easy to embed to other products, works perfectly compatible with Arduino IDE..
ESP32 development board support lua program, easy to develop, support LWIP protocol, Freertos, three modes : AP, STA and AP + STA..
ESP32 is a safe, reliable, and scalable to a variety of applications,the user can cut off the power of the CPU and use the low-power coprocessor to continuously monitor the status of the peripherals or whether some of the analog values exceed the threshold..

Check Stock

5 Pieces I2C Display Module 0.91 Inch I2C OLED Display Module I2C OLED Screen Driver DC 3.3V~5V White Display Color

What will you get: there are 5 pieces OLED display module with classic display color, self-illuminated and no need backlight.
Power-saving display: the I2C oled display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications)....
More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc..
Good compatibility: this i2c oled display module is compatible with Raspberry Pi 4B/3B+/3B/2B/Zero, compatible with Arduino, also compatible with....
Product manual: as shown in the instructions.

Check Stock

HiLetgo 3pcs ESP32 Mini ESP-WROOM-32 Development Board WLAN WiFi Bluetooth IoT Development Board

ESP32 Mini development board, everything needed to program the ESP32 module, ESP32/32S WIFI Development Bluetooth ESP8266 Module CP2104 for Arduino IDE..

Check Stock

DORHEA ESP32 Cam WiFi Bluetooth Development Board with OV2640 Camera Module + Micro USB to Serial Port CH340C 4.75V-5.25V Nodemcu for Raspberry Pi - 3 Set

The ESP32 CAM equips the ESP32 with everything necessary to program, run and develop on the wonderchip. Additionally, the board reserved the MPU6050,BME280 and an analog MIC..
ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications..
ESP32 CAM supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC, ultra-low power consumption, deep sleep current is as low as 6mA. It is an ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module..
The esp32 kit module can work independently as the smallest system..
Esp32 cam adopts Micro USB interface, convenient and reliable connection method, convenient to apply to various IoT hardware terminal occasions..

Check Stock

AITRIP 5 PCS ESP8266 NodeMCU V3 CP2102 ESP-12F 4M Bytes Internet of Things WiFi Development Board Serial Wireless Module for Arduino IDE Micropython

There is the way to guide you to use the new version: The command you needed to use is: esptool.py --baud 115200 --port /dev/tty.SLAB_USBtoUART write_flash -fs 32m -ff 80m --flash_mode dio 0x00000 boot_v1.7.bin 0x1000 user1.bin 0x37c000 esp_init_data_default.bin 0x37e000 blank.bin The important part is “—flash mode dio”.
ESP8266 CP2102 NodeMCU LUA ESP-12F WIFI Serial Wireless Module.
Compatible with Arduino, works great with the latest Compatible with Arduino IDE/Mongoose IoT/Micropython.
SP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor..
5pcs ESP8266 CP2102 NodeMCU LUA ESP-12F WIFI Serial Wireless Module.

Check Stock

3 Pieces ESP WROOM 32 ESP32 Development Board 2.4GHz WiFi Dual Cores Microcontroller Integrated with Antenna RF Low Noise Amplifiers Filters

Package contains: you will get 3 pieces of ESP-32 2.4GHz dual-mode WiFi development boards, enough for your daily use and replacement.
Multiple functions: ESP32 development board integrates antenna switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules.
And the entire solution occupies the smallest printed circuit board area.
ESP-32 development board is safe, reliable and scalable to various applications, bringing you a lot of convenience.
Small size: ESP-32 dual-mode module is compact and easy to embed into your device, convenient to use.
Low power consumption: the development board uses 2.4GHz dual-mode Wi-Fi, chip ESP-WROOM-32, and 40nm low power consumption technology.

Check Stock

AITRIP 5 PCS ESP8266 NodeMCU CP2102 ESP-12E Internet WiFi Development Board Open Source Serial Wireless Module Works Great Compatible with Arduino IDE/Micropython (5PCS)

There is the way to guide you to use the new version: The command you needed to use is: esptool.py --baud 115200 --port /dev/tty.SLAB_USBtoUART write_flash -fs 32m -ff 80m --flash_mode dio 0x00000 boot_v1.7.bin 0x1000 user1.bin 0x37c000 esp_init_data_default.bin 0x37e000 blank.bin The important part is “—flash mode dio”.
ESP8266 CP2102 NodeMCU LUA ESP-12E WIFI Serial Wireless Module.
Compatible with Arduino, works great with the latest Compatible with Arduino IDE/Mongoose IoT/Micropython.
SP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor..
5pcs ESP8266 CP2102 NodeMCU LUA ESP-12E WIFI Serial Wireless Module.

Check Stock

2 Pieces I2C Display Module 0.91 Inch I2C OLED Display Module Blue I2C OLED Screen Driver DC 3.3V - 5V

What you will get: you will get 2 OLED display modules with classic display colors, self illumination with no need of backlight.
Power-saving display: the I2C OLED display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications)....
More details: this I2C LCD display is compatible with Arduino, ESP8266, ESP32, STM32, etc., 3.35V power.
Operating temperature: -40 - 85 degree....
Good compatibility: this I2C OLED display module is compatible with Raspberry Pi 4B/ 3B+/ 3B/ 2B/ Zero, compatible with Arduino, also compatible with....
Product manual: as shown in the instructions.

Check Stock

DORHEA 10PCS ESP-WROOM-32D ESP32 Bluetooth and WiFi Low Power Module integrates ESP32-D0WD Generic Wi-Fi+BT+BLE MCU Modules for Voice Encoding Music Streaming and MP3 Decoding

ESP32-WROOM-32D are powerful, generic Wi-Fi+BT+BLE MCU modules that target a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding..
The sleep current of the ESP32 chip is less than 5 µA, making it suitable for battery powered and wearable electronics applications..
ESP32-WROOM-32D integrate a 4 MB of external SPI flash. The integrated SPI flash is connected to GPIO6, GPIO7, GPIO8, GPIO9, GPIO10 and GPIO11. These six pins cannot be used as regular GPIOs..
Flash integrated on the module and are not recommended for other uses..

Check Stock

BIGTREETECH SKR 3 EZ Mainboard Silent Motherboard 48V High Speed Printing Support Marlin &Klipper Firmware Compatible with EZ2209 EZ5160 TMC5160 TMC2209 Driver for 3D Printer DIY Control Board

☆【48V High Speed Printing】Motor voltage of SKR 3 EZ varies from 12V to 48V (need to use EZ5160 Pro driver for 48V) while SKR 3 varies from DC....
☆【Safe Anti-misplugging Design】Wrong installation of drivers will not only cause damage to the drivers itself but even ruin the motherboard or....
☆【Updates of Processor】The new processor of SKR 3 EZ controller is upgraded to 32-bit 480MHz ARM Cortex-M7 series STM32H743VI, with which the....
☆【DIY Friendly Interfaces】BOOT0 is added for programming firmware in DFU mode. WIFI module (ESP-12S, ESP-07S, ESP32) is reserved. SKR 3 EZ....
☆【About Firmware】SKR 3 EZ silent board compatible with three firmware Marlin, Klipper and RepRap, which are widely used in the 3D printing....

Check Stock

AITRIP 4PCS ESP32 ESP-32S Development Board 2.4GHz Dual Mode WiFi Bluetooth Dual Cores Chip CP2102 Microcontroller Processor Integrated with ESP32s Antenna RF AMP Filter AP STA for Arduino IDE

Ultra-Low power consumption,small volume, easy to embed to other products, works perfectly compatible with the Arduino IDE..
ESP32 is a safe, reliable, and scalable to a variety of applications,the user can cut off the power of the CPU and use the low-power coprocessor to continuously monitor the status of the peripherals or whether some of the analog values exceed the threshold..
ESP32 development board support lua program, easy to develop, support LWIP protocol, Freertos, three modes : AP, STA and AP + STA..
you will get 4PCS Dual core ESP-32 development board, 2.4GHz Dual Mode Development Board..

Check Stock