ReviewsEsp8266 Wifi Module

DORHEA ESP8266 Code Burner Reflash Firmware Downloader CP2102 Test Board Code Burner Flash Downloade Compatible with ESP8266 ESP-01S/01 ESP-07/07S ESP-12E/12F/12S/F

  • ESP8266 test frame burner development board work Voltage: DC 5V.
  • The board supports firmware one-click download function and adds programming.
  • Micro USB interface, this module is very easy to program..
  • The ESP8266 test board code burner flash downloader compatible with ESP-01 ESP-01S ESP-07 ESP-07S ESP-12E ESP-12F ESP-12S ESP-F..
  • ESP8266 code burner firmware downloader all IO ports have been drawn out and can be used as minimum system development board or small batch burning fixture..
Check Stock

HiLetgo 2pcs ESP8266 NodeMCU CP2102 ESP-12E Development Board Open Source Serial Module (Pack of 2PCS)

  • ESP8266 CP2102 NodeMCU LUA ESP-12E WIFI Serial Wireless Module.
  • Built-in Micro-USB, with flash and reset switches, easy to program.
  • Arduino compatible, works great with the latest Arduino IDE/Mongoose IoT/Micropython.
  • Data download access to the website: http://www.nodemcu.com.
Check Stock

5 Pieces I2C Display Module 0.91 Inch I2C OLED Display Module Blue I2C OLED Screen Driver DC 3.3V~5V(Blue Display Color)

  • What will you get: there are 5 pieces OLED display module with blue display color, self-illuminated and no need backlight.
  • Power-saving display: the I2c oled display performs better than the traditional LCD display and with lower consumption sicne the IIC (I2C communications) simplifies connections.
  • Please note that these I2C OLED display module comes without pin headers.
  • More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc..
  • Good compatibility: this i2c oled display module is compatitable with Raspberry Pi 4B/3B+/3B/2B/Zero, compatitable with Arduino, also compatitable for ESP8266, ESP32, STM32, etc..
  • Product manual: as shown in the instructions.
Check Stock

JM Set of 3 pcs Transparent 3D Floating Frame Display Holder/Box/Frames for Challenge Coins, AA Medallions, Antique, Jewelry,Gift, White, 2.75 x 2.75 x 0.75 Inches

  • What will you get: there are 5 pieces OLED display module with classic display color, self-illuminated and no need backlight.
  • Power-saving display: the I2C oled display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications) simplifies connections.
  • Please note that these I2C OLED display module comes without pin headers.
  • More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc..
  • Good compatibility: this i2c oled display module is compatible with Raspberry Pi 4B/3B+/3B/2B/Zero, compatible with Arduino, also compatible with ESP8266, ESP32, STM32, etc..
  • Product manual: as shown in the instructions.
Check Stock

AURSINC WiFi Deauther Watch V3 ESP8266 Programmable Development Board | Wearable Smartwatch | OLED&Laser | Attack/Control/Test Tool|LOT for DSTIKE NodeMCU

  • ORIGIN DSTIKE Watch V3, with better performance and appearance than V1&V2, is wrapped by the Arcylic cover and 3D print transparent case, moreover, equiped with upgraded software system, which is easier to operate..
  • WiFi Test Tool: installed with the latest ESP8266 Deauther software, the deauther watch can perform different secure tests for your WiFi networks, equiped with 5dB FPC antenna. NOTE: ESP8266 supports 2.4GHz only..
  • Extensible: Deauther wathch V3 also can be used to develop your own software, it is indeed a ESP8266 development board, easy to operate..
  • LONG WORKING TIME: DSTIKE Deauther watch has a built-in an 800mAh battery, the maximum working time of the WiFi Deauther wristband reaches 8 hours, also the battery can be charged while in use. Moreover, the watch is equiped with OLED display and a 3-way momentary slide switch..
  • NOTE: the wifi deauther watch can be used only for testing and educational purposes on your own devices! Firmware and Software download please refer to the below description..
Check Stock

HiLetgo 3pcs ESP8266 NodeMCU CP2102 ESP-12E Development Board Open Source Serial Module Works Great for Arduino IDE/Micropython (Large)

  • ESP8266 CP2102 NodeMCU LUA ESP-12E WIFI Serial Wireless Module.
  • Built-in Micro-USB, with flash and reset switches, easy to program.
  • Arduino compatible, works great with the latest Arduino IDE/Mongoose IoT/Micropython.
Check Stock

HiLetgo 1PC ESP8266 NodeMCU CP2102 ESP-12E Development Board Open Source Serial Module Works Great for Arduino IDE/Micropython (Small)

  • ESP8266 CP2102 NodeMCU LUA ESP-12E WIFI Serial Wireless Module.
  • Built-in Micro-USB, with flash and reset switches, easy to program.
  • Arduino compatible, works great with the latest Arduino IDE/Mongoose IoT/Micropython.
Check Stock

MakerFocus ESP8266 WiFi Module ESP8266 WiFi Deauth Detector V3 (Pre-flashed) with Buzzer RGB LED, ESP8266 ESP12N Inside 4MB Memory USB LED NodeMCU Wi-Fi Deauther ESP8266 Starter Kit DSTIKE

  • ...he Product guides and documents below: It will tell you What is wifi deauthentication attack, USB attack firmware, the way to RGB LED Test: You have to install Adafuit RGB LED library first. and CP2102 Driver Download link.
  • What is it? It is a device which could detect a WiFi deauthentication attack.It is also an ESP8266 starter kit, you can use it learn esp8266. You can start from how to control the highlight LED or RGB LED..
  • Deauth detector V3 replaced high light LED with a buzzer. Now it could show different status by different color and sound. If you are under WiFi deauth attacked, RGB LED will turn red and buzzer start playing music. If nothing happened then RGB LED turn green..
  • You can plug it into power bank or any 5V USB port.It is also an ESP8266 starter kit, you can use it learn esp8266. You can start from how to control buzzer or RGB LED. ESP-12E inside, it has 4MB memory..
  • We have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation!.
Check Stock

AURSINC WiFi Deauther DSTIKE Mini ESP8266 Development Board with 1.3inch OLED Display

  • Latest Software: installed with the latest ESP8266 Deauther software. With this software, you can perform different secure tests for your WiFi networks. NOTE: ESP8266 supports 2.4GHz only..
  • Password:deauther ； https:// github. com/spacehuhn/esp8266_deauther/wiki/FAQhow-to-do-a-reset..
  • Power Saving and Safe: Low Voltage Low-Dropout Regulator, Short Protection, Over-Charging Protection, Over-Temperature Protection..
  • NOTE: Use it only for testing and educational purposes against your own devices! Any questions or problems, please feel free to contact us..
Check Stock

6pcs ESP8266 NodeMCU LUA CH340 ESP-12E WiFi Internet Development Board 4M Flash Serial Wireless Module for Arduino IDE/Micropython New Version

  • ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area..
  • ESP8266 is a highly integrated chip designed for the needs of a new connected world.It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor..
  • This ESP8266 NodeMcu development board can be use for small temperature and humidity monitor in home automation project and works very well Compatible with Arduino development platform..
  • ESP8266 CH340 chip, power your development in the fastest way combinating with NodeMcu Firmware.
  • It's a IOT unit with all available resources on board, support smart link and smart networking..
Check Stock

HiLetgo UNO R3 WiFi ATmega328P + WiFi + ESP8266 NodeMCU 32MB Memory USB-TTL CH340G for Arduino with USB Cable 2.4G WiFi Antenna

  • UNO R3 WIFI ATmega328P + WiFi +ESP8266 NodeMCU 32MB Memory.
  • Integrated with ESP8266 WIFI, 32MB Memory.
Check Stock