ReviewsEsr Phone Case

YMHML Slim Credit Card Holder for Back of Phone - Ultra Slim Lycra 3M Self Adhesive Phone Pocket Stick On Wallet for ID Credit Card Pocket （iPhone Android Galaxy） (White+Yellow+Green+Blue+Black)

  • Compatible: It fits iPhone X, XS Max, XR, 7, 6S, 6, SE, 5S, 5,6 Plus,6s Plus, 7 Plus, amsung Galaxy S6, S5, S4, S3, Galaxy Note 5, 4, 3, 2, 1. and most smart phones. It also sticks to most cases like Spigen, JETech, OtterBox, Matone, Tribe, TORRAS, ULAK, SUPCASE, ESR and So On. Note – iPhoneX/8/8+ has an anti-fingerprint coating on the back of these devices that doesn’t allow 3M adhesive so we recommend a case with these phone models..
  • Double secure, Discreet design: It is made of Lycra elastic fabric, high quality material,quite stretchy, and 1-5 cards fit. The strong wallet sleeve will keep its shape and cards will not fall out. The full-cover design can protect your items more safety and keep your personal items more secretly..
  • Easy to carry：Light weight, ultra slim, holds up some cards and some cash so that you don’t need to carry a big bulky wallet in your pocket and keep them safe. It allowed to store up some cards or cash, ID card, credit cards, keys, pencil, ear buds. It can hold about 5 cards at the same time..
  • Useful sticker pouch in many occasions: Besides of a stick wallet for your phone, you can stick it on your computer desk and put your pens in it, stick on mirror and put your comb or makeup tools. You can also stic....
Check Stock

Pouch Flap Credit Card Holder for Back of Phone, Secure Cell Phone Stick on Wallet Phone Card Holder, Phone Card Wallet, iPhone Card Holder/Credit Card Case for Cell Phone (White3)

  • Compatible: It fits iPhone X, XS Max, XR, 7, 6S, 6, SE, 5S, 5,6 Plus,6s Plus, 7 Plus, amsung Galaxy S6, S5, S4, S3, Galaxy Note 5, 4, 3, 2, 1. and most smart phones. It also sticks to most cases like Spigen, JETech, OtterBox, Matone, Tribe, TORRAS, ULAK, SUPCASE, ESR and So On. Note – iPhoneX/8/8+ has an anti-fingerprint coating on the back of these devices that doesn’t allow 3M adhesive so we recommend a case with these phone models..
  • Highly secure and tight adhesive phone wallet: With FLAP, the users can prevent direct exposure of their private information and the FLAP’s cover designed to maximize the security, so users can effectively hold their credit card, ID cards and driver license.High quality material,quite stretchy, and 1-5 cards fit. The strong wallet sleeve will keep its shape and cards will not fall out. The full-cover design can protect your items more safety and keep your personal items more secretly..
  • Easy to carry：Light weight, ultra slim, holds up some cards and some cash so that you don’t need to carry a big bulky wallet in your pocket and keep them safe. It allowed to store up some cards or cash, ID card, credit cards, keys, pencil, ear buds. It can hold about 5 cards at the same time..
Check Stock

YMHML Slim Credit Card Holder for Back of Phone - All Cell Phone, Ultra Slim Lycra 3M Self Adhesive Phone Pocket Stick On Wallet for ID Credit Card Pocket （iPhone Android Galaxy） (Gray+White+Black)

  • Compatible: It fits iPhone X, XS Max, XR, 7, 6S, 6, SE, 5S, 5,6 Plus,6s Plus, 7 Plus, amsung Galaxy S6, S5, S4, S3, Galaxy Note 5, 4, 3, 2, 1. and most smart phones. It also sticks to most cases like Spigen, JETech, OtterBox, Matone, Tribe, TORRAS, ULAK, SUPCASE, ESR and So On. Note – iPhoneX/8/8+ has an anti-fingerprint coating on the back of these devices that doesn’t allow 3M adhesive so we recommend a case with these phone models..
  • Double secure, Discreet design: It is made of Lycra elastic fabric, high quality material,quite stretchy, and 1-5 cards fit. The strong wallet sleeve will keep its shape and cards will not fall out. The full-cover design can protect your items more safety and keep your personal items more secretly..
  • Easy to carry：Light weight, ultra slim, holds up some cards and some cash so that you don’t need to carry a big bulky wallet in your pocket and keep them safe. It allowed to store up some cards or cash, ID card, credit cards, keys, pencil, ear buds. It can hold about 5 cards at the same time..
  • Useful sticker pouch in many occasions: Besides of a stick wallet for your phone, you can stick it on your computer desk and put your pens in it, stick on mirror and put your comb or makeup tools. You can also stic....
Check Stock

YMHML Pouch Flap Credit Card Holder for Back of Phone, Secure Cell Phone Stick on Wallet Functioning as Phone Card Holder, Phone Card Wallet, iPhone Card Holder/Credit Card Case for Cell Phone (White)

  • Compatible: It fits iPhone X, XS Max, XR, 7, 6S, 6, SE, 5S, 5,6 Plus,6s Plus, 7 Plus, amsung Galaxy S6, S5, S4, S3, Galaxy Note 5, 4, 3, 2, 1. and most smart phones. It also sticks to most cases like Spigen, JETech, OtterBox, Matone, Tribe, TORRAS, ULAK, SUPCASE, ESR and So On. Note – iPhoneX/8/8+ has an anti-fingerprint coating on the back of these devices that doesn’t allow 3M adhesive so we recommend a case with these phone models..
  • Highly secure and tight adhesive phone wallet: With FLAP, the users can prevent direct exposure of their private information and the FLAP’s cover designed to maximize the security, so users can effectively hold their credit card, ID cards and driver license.High quality material,quite stretchy, and 1-5 cards fit. The strong wallet sleeve will keep its shape and cards will not fall out. The full-cover design can protect your items more safety and keep your personal items more secretly..
  • Easy to carry：Light weight, ultra slim, holds up some cards and some cash so that you don’t need to carry a big bulky wallet in your pocket and keep them safe. It allowed to store up some cards or cash, ID card, credit cards, keys, pencil, ear buds. It can hold about 5 cards at the same time..
Check Stock

MESR-100 Capacitor Tester, Geevorks ESR Meter in Circuit Capacitor Tester Up to 0.001-100.0R, Auto-Ranging Ohm Meter

  • This MESR-100 auto-ranging capacitor ESR and low Ohm meter measuring range from 0.001 to 100.0R, support in circuit testing..
  • Capacitance meter is a series resistor inside capacitor, using 100kHz to remove the impedance 1/(2*pi*F*C).The impedance become small, and we can then measure the true series resistor value..
  • Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a r-esult we can use it as in circuit test..
  • Dual terminal, for fast and easy inspect internal resistance of the capacitor, a printed ESR table for fast check..
  • Note:The Capacitance Meter is used for testing the internal resistance of the capacitor, not for testing capacitance value.[Note: without SMD test clips].
Check Stock

DE-5000 Handheld LCR Meter

  • This LCR Meter is a 19999/ 9999 counts dual display, high accuracy LCR meter, which could measure Inductance/ Capacitance/ Resistance with secondary parameters including dissipation factor (D), quality factor (Q), phase angle , equivalent series/ parallel resistance (ESR or Rp)..
  • This LCR Meter is fully auto ranging operation for AC impedance & DC resistance measurement. The user could measure the L/C/R components directly in “AUTO-LCR “ smart mode without selecting the function key..
  • Components could be measured in serial or parallel mode according to the DUT (device under test) impedance automatically.User could select the desired test frequencies of 100Hz/120Hz/1kHz/10kHz /100kHz..
  • The "Sorting"mode could help the user to make a quick sort for a bunch of components..
  • Standard Accessories: English PDF manual, DC9V Battery, Alligator test lead case(TL-21), SMD Tweezers case(TL-22), Guard Line(TL-23),,,,, Option: IR to USB cace *It isn't included..
Check Stock

Extreme Sim Racing Wheel Stand Cockpit SGT Racing Simulator -Racing Wheel Stand Black Edition For Logitech G25 G27 G29 G920 Thrustmaster And Fanatec - Heavy Dutty and Foldable

  • ✔️ Ships almost completely assembled. Minimal assembly effort required and 5/64” Steel Tubing for ROCK SOLID stability. Compatible and drilled....
  • ✔️ Folds up for easy storage and the rugged powder coat finish with Anti-Slip rubber feet to prevent slipping on carpet & hardwood surfaces. (ESR....
  • ✔️ Full length Pedal Deck w/ full range mounting capabilities including angle adjustment and Rugged Wheel Deck with tilt adjustments. Height....
  • ✔️ Shifter Mount and Cup Holderintegrated into Wheel Deck.(ESR Proprietary Design).
  • ✔️ Easily adjustable lock-down knobs. Non-Stick Polyurethane Bushings to prevent metal-on-metal sticking during adjustments. (ESR Proprietary....
Check Stock

Extreme Sim Racing Triple Screen Tv Stand Add-on Upgrade With Back Tray - Fits almost all Sim Racing Rigs in the Market - Suitable for TV sizes up to 3 x 37'

  • ✔️ Fully adjustable in any direction. Support TV/Monitors from 3x26" up to 3x37".
  • ✔️ Back Tray for PC/Console (ESR Proprietary Design).
  • ✔️All way adjustable including monitors Angle°, Tilt°, Height and each VESA can be adjusted separately for Angle and height. Non-Stick Polyurethane Bushings to prevent metal-on-metal sticking during adjustments. (ESR Proprietary Design)..
  • ✔️ 5/64” Steel Tubing for ROCK SOLID stability. Extremely rugged powder coat finish..
  • ✔️ Compatible with all ESR Cockpits, Wheel Stands and any Sim Racing Rig in the Market. Can use the stand as single TV stand.
Check Stock

B&K Precision 880 100 kHz Handheld LCR Meter, Blue

  • 40,000 counts resolution on primary and 10,000 counts resolution on secondary display.
  • L, C, R, and Z (879B & 880 only) primary measurements.
  • Automatic calculation of secondary parameters D, Q, Theta, ESR (Theta/ESR for 879B &880 only), and DCR (880 only).
  • Accuracy up to 0.1% and selectable test frequencies up to 100 kHz (880 only).
  • Fast auto range design for rapid, easy component measurements.
Check Stock

Extreme Sim Racing Wheel Stand Cockpit SXT V2 Racing Simulator - Racing Wheel Stand For Logitech G25, G27, G29, G920, Thrustmaster And Fanatec - Wheel Locks Included - Nardo Gray

  • ✔️ Ships almost completely assembled. Minimal assembly effort required and 5/64” Steel Tubing for ROCK SOLID stability. Compatible and drilled for all major brands, including Logitech, Thrustmaster & Fanatec.
  • ✔️ Folds up for easy storage and the rugged powder coat finish with anti-Slip rubber feet to prevent slipping on carpet & hardwood surfaces. (ESR Proprietary Design).
  • ✔️ Full length Pedal Deck w/ full range mounting capabilities including angle adjustment and Rugged Wheel Deck with tilt adjustments. Height adjustable upper bar..
  • ✔️ Shifter Mount and Cup Holder integrated into Wheel Deck.(ESR Proprietary Design).
  • ✔️ Easily adjustable lock-down knobs. Non-Stick Polyurethane Bushings to prevent metal-on-metal sticking during adjustments. (ESR Proprietary Design).
Check Stock

Extreme Sim Racing Wheel Stand Cockpit SXT V2 Racing Simulator - Racing Wheel Stand Black Edition For Logitech G25, G27, G29, G920, Thrustmaster And Fanatec - Heavy Dutty and Foldable

  • ✔️ Ships almost completely assembled. Minimal assembly effort required and 5/64” Steel Tubing for ROCK SOLID stability. Compatible and drilled for all major brands, including Logitech, Thrustmaster & Fanatec.
  • ✔️ Folds up for easy storage and the rugged powder coat finish with anti-Slip rubber feet to prevent slipping on carpet & hardwood surfaces. (ESR Proprietary Design).
  • ✔️ Full length Pedal Deck w/ full range mounting capabilities including angle adjustment and Rugged Wheel Deck with tilt adjustments. Height adjustable upper bar..
  • ✔️ Shifter Mount and Cup Holder integrated into Wheel Deck.(ESR Proprietary Design).
  • ✔️ Easily adjustable lock-down knobs. Non-Stick Polyurethane Bushings to prevent metal-on-metal sticking during adjustments. (ESR Proprietary Design).
Check Stock