ReviewsEsun Petg Filament 75

SUNLU 2KG PETG 3D Printer Filament Bundle, Super Neat Filament Spool, Strong PETG Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool(2.2LB), Pack of 2, Red+Orange

①【PETG Filament Advantages】PETG filament combines the advantages of both PLA and ABS 3D printer filament, PETG filament is easy to use like PLA, durable strength like ABS..
②【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
③【SUNLU Spool Diameter】Spool Diameter: 8.00.

Check Stock

NOVAMAKER PETG Black Filament 1.75mm ,Toughness Enhanced petg Vacuum Sealed,Accuracy +/- 0.02mm, 1kg(2.2lbs) Spool, 3D Filament petg

✅【Toughness Enhanced】Ease of printing, high purity with low shrinkage and superb layer bonding.Novamaker PETG filaments will meet your demands for printing projects of functional parts with higher toughness..
✅【Clog-Free & Bubble-Free】Novamaker dry petg 1.75mm filament for 48 hours before packaging and vacuum sealed in nylon rebag. No stringing and warping issues,easy to use..
✅【Tangle Less】Advanced take-up device, PLC automatic precise wire arranging to make sure the line tidy and less-tangle and guarantee the petg filament 1.75 tidy and easy to be fed..
✅【Dimensional Consistency】1.75 mm petg, dimensional accuracy + / - 0.02 mm,giving you a great printing experience with no clog. 1 kg spool..
✅【All Lifetime Warranty】Recommended extrusion/nozzle temperature 230°C - 250°C,net weight 1kg spool. Fast and effective 24 x 7 professional customer support providing technical solution of novamaker petg black filament..

Check Stock

SUNLU Upgraded Dry Box for 3D Filament Storages, Dehydrator of Filament Dryer Box, 3D Filament Enclosure Compatible with 1.75mm, 2.85mm, 3.00mm 3D Filament, Spool Holder (White)

【Say goodbye to the printing failure】3D printing filaments are hygroscopic, moisture can cause printing failure. SUNLU filament dryer box helps to dry excess moisture, improve your 3D model, and make the filaments say goodbye to the troubles of drawing, clogging, and poor adhesion..
【No assembly required, easy to operate and effective】SUNLU 3D printer Filament enclosure requires no assembly and can be used right out of the box. There are only two buttons, and the operation is convenient and simple. SUNLU filament dehydrator box makes the printing effect better and the surface of the model is smoother. No more brittle PLA+, PETG, ABS filament..
【Personalized settings, strong compatibility】The default drying time of SUNLU dryer box is 6 hours, you can also set the drying time and temperature according to your own preferences. The time setting range is 0~24 hours, and the temperature range is 35°C~55°C. The drying box is compatible with filaments of different brands such as: SUNLU, ERYONE, ESUN, GEEETECH, etc. It is also perfectly suitable for all standard filament diameters: 1.75mm/2.85mm/3.00mm..
【Ultra-quiet design, free your hands】SUNLU filament Enclosure box is very quiet at work, less than 10db when running, no disturbing of your li....

Check Stock

Creality PETG Filament 1.75 mm - White | 3D Printer Filament | 1Kg Spool (2.2 Lbs) | Dimensional Tolerance +/- 0.2 mm | Fit Most FDM Printers

SPECIFICATION - Filament Diameter – 1.75mm | Weight – 1Kg Spool (2.2 Lbs) | Color – White | Dimensional Tolerance +/- 0.2 mm | High Precision | No Bubbles | Eco-Friendly | Stronger Toughness | Fit with Most FDM Printers.
MATERIAL - Creality PETG Filament offers excellent clarity, light transmission (in the translucent colors), and high gloss. PETG is also a food contact approved material, is BPA free and prints without any odor or smell! Once you've mastered the basics for printing with PETG, you will find it to be easy to print with and comes out great in a wide temperature range. PETG material, environmental protection, high gloss, printing is not easy to crack and will not emit odor..
QUALITY – Creality PETG filament is great even for large flat prints due to its very low shrinkage. A combination of strength, low shrinkage, smoother finish, and higher heat resistance make PETG an ideal everyday alternative to PLA and ABS. Other features include great layer adhesion, chemical resistance including acids and water. PETG is also less prone to moisture-related issues..
FIT MOST FDM PRINTERS - Creality PETG filament is characterized by consistent quality, high dimensional accuracy, and has been extensively tested on a variety of printers.

Check Stock

NovaMaker PETG 3D Printer Filament 1.75 - Black 1.75mm PETG Filament, PETG 1kg Spool(2.2lbs), Dimensional Accuracy +/- 0.03mm.

✅【Risk-Free Service】One-month free trial, Lifetime Quality Promise and Money Return Service if you’re not entirely satisfied. Professional printing advice from technique support team make sure your prints SMOOTH & STABLE with excellent adhesion..
✅【Best Quality PETG Filament】Made by USA virgin PETG material with best performance and Eco-friendly, Clog-Free, Bubble-Free & Easy-to-use. Ensure Diameter 1.75mm + / - 0.02 mm..
✅【Tangle-Free Tips】Black PETG Filament dried 24 hours before packaging and vacuum sealed with desiccants in nylon bag. To Avoid being Tangled, Filament should be fix into Spool Holes after Every Time Use..
✅【Printing Tips】Recommended Prting Temperature 230°C - 250°C, Bed 70°C - 80°C. PETG Spool Diameter: 7.8" - Spool Width: 2.6" - Spool Hub Hole Diameter: 2.1"..
✅【Cost-effective & Wide Compatibility】Manufacturer NovaMaker has over 8years 3D filament R&D experiences, and produce all kinds of filaments in large scale with premium quality, which contribute to 3d filament cost-effective and reliable for all common 1.75mm FDM 3D printers, such as Creality, MK3, Ender3, Prusa, Monoprice, FlashForge etc..

Check Stock

NovaMaker PETG 3D Printer Filament 1.75, Clear PETG Filament 1.75mm, Transparent PETG 1kg(2.2lbs), Dimensional Accuracy +/- 0.03mm

✅【Risk-Free Service】One-month free trial, Lifetime Quality Promise and Money Return Service if you’re not entirely satisfied. Professional printing advice from technique support team make sure your prints SMOOTH & STABLE with excellent adhesion..
✅【Best Quality PETG Filament】Made by USA virgin PETG material with best performance and Eco-friendly, Clog-Free, Bubble-Free & Easy-to-use. Ensure Diameter 1.75mm + / - 0.02 mm..
✅【Tangle-Free Tips】Clear PETG Filament dried 24 hours before packaging and vacuum sealed with desiccants in nylon bag. To Avoid being Tangled, Filament should be fix into Spool Holes after Every Time Use..
✅【Printing Tips】Recommended Prting Temperature 230°C - 250°C, Bed 70°C - 80°C. PETG Spool Diameter: 7.8" - Spool Width: 2.6" - Spool Hub Hole Diameter: 2.1"..
✅【Cost-effective & Wide Compatibility】Manufacturer NovaMaker has over 8years 3D filament R&D experiences, and produce all kinds of filaments in large scale with premium quality, which contribute to 3d filament cost-effective and reliable for all common 1.75mm FDM 3D printers, such as Creality, MK3, Ender3, Prusa, Monoprice, FlashForge etc..

Check Stock

SUNLU ABS Filament 1.75mm Black Bundle of 5kg ABS 3D Printer Filament Dimensional Accuracy +/- 0.02 mm,1KG per Spool Total 5 KGs/5 Spools

【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable....
【Filament Spool Diameter】Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is....
【PETG Filament Advantages】SUNLU PETG strong filament has many advantages: Clog Free, Bubble Free, Tangle Free, Warping Free, Stringing Free, Easy....
【Combining PLA and ABS】SUNLU PETG filament combines the advantages of both PLA 3D printer filament and ABS 3D printer filament, ease to use like....
【Recommend Settings】We recommend printing at a Nozzle/Extrusion temperature of 235°C - 245°C (455°F - 473°F) and Bed/Platform temperature of....

Check Stock

Inland 1.75mm Blue PETG 3D Printer Filament Dimensional Accuracy +/- 0.03 mm - 1kg Spool 2.2 lbs

1 KG (approximately 2.2 lbs) Spool/ 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
Recommended Extrusion/Nozzle Temperature: 230°C - 250°C (440°F - 480°F)/ No heated bed needed/ Vacuumed sealed with desiccant.
PETG Filament Features: Durable/ good adhesion/ high strength/ high temperature resistant/ low shrinkage/ smoother finish/ odorless, combines the....
Premium Quality: Inland PETG 3D Printer Filament Undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more....

Check Stock

Inland 1.75mm White PETG 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Spool (2.2 lbs)

1 KG (approximately 2.2 lbs) Spool/ 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
Recommended Extrusion/Nozzle Temperature: 230°C - 250°C (440°F - 480°F)/ No heated bed needed/ Vacuumed sealed with desiccant.
PETG Filament Features: Durable/ good adhesion/ high strength/ high temperature resistant/ low shrinkage/ smoother finish/ odorless, combines the advantages of both PLA and ABS.
Premium Quality: Inland PETG 3D Printer Filament Undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time creating! 100% satisfaction guarantee provided.

Check Stock

Inland 1.75mm Black PETG 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Spool (2.2 lbs)

1 KG (approximately 2.2 lbs) Spool/ 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
Recommended Extrusion/Nozzle Temperature: 230°C - 250°C (440°F - 480°F)/ No heated bed needed/ Vacuumed sealed with desiccant.
PETG Filament Features: Durable/ good adhesion/ high strength/ high temperature resistant/ low shrinkage/ smoother finish/ odorless, combines the advantages of both PLA and ABS.
Premium Quality: Inland PETG 3D Printer Filament Undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time creating! 100% satisfaction guarantee provided.

Check Stock

Inland 1.75mm Translucent Blue PETG 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Spool (2.2 lbs)

1 KG (approximately 2.2 lbs) Spool/ 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
Recommended Extrusion/Nozzle Temperature: 230°C - 250°C (440°F - 480°F)/ No heated bed needed/ Vacuumed sealed with desiccant.
PETG Filament Features: Durable/ good adhesion/ high strength/ high temperature resistant/ low shrinkage/ smoother finish/ odorless, combines the advantages of both PLA and ABS.
Premium Quality: Inland PETG 3D Printer Filament Undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time creating! 100% satisfaction guarantee provided.

Check Stock