ReviewsEthernet Communication Module

UMLIFE 3PCS 6DOF 6-Axes Sensor Module Gravity Sensor GY-BMI160 Module Accelerometer Gyroscope Acceleration Gravity Sensor IIC I2C 3-5V for Arduino

Communication: standard IIC communication protocol.
✹✹This sensor module is a small, 3 a-xis accelerometer and 3 ax-is gyroscope integrated in a single package..
✹✹The BMI160 is a small, low-power, low-noise 16-bit inertial measurement unit designed for use in mobile applications such as augmented reality or inland navigation, which require high-precision, real-time sensor data..
✹✹In full operation mode, with both the accelerometer and gyroscope enabled, allowing always-on applications in battery-powered devices..
✹✹3PCS 6DOF Bosch GY-BMI160 Module 6-axis Acceleration Gyro Gravity Sensor for Arduino.

Check Stock

DIGISHUO Raspberry Pi 4B Model B 2/4/8GB RAM DIY Kit Case Fan SD Card Micro-SD HDMI (8G Module 8 in 1 Kit)

【Raspberry Pi 4 Model B Starter Kit】 Motherboard, New SOC Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit at 1.5GHz. Capable of supporting HEVC 4K streams at 60 fps and managing 2 screens in 4K.
【Fastest Raspbery Pi 4 Model B Starter Kit】Dual band 802.11b/g/n/ac WiFi (2.4/5.0 GHz) and Bluetooth 5.0 module. Transfers via 2 USB 3.0 & 2 USB 2.0 ports is faster up to 10 times, 4Gb/s or 500 MB/s. Faster Gigabit Ethernet & Power-over-Ethernet support.
【64GB Class 10 SanDisk Micro SD Card】Use brand new sd card and have no noobs in it you need install system yourself.
【4B Module Cooling Kit】Pi cooling fan with 4 pcs heatsink will make the pi module cooling fast.
【Customized Case】will protect the pi module for well and can also work with 3.5 screen.
【RAM Size Can be Chosen】You can choose 2G or 4G or 8G for your project.

Check Stock

2 Pieces MPU-9250 GY-9250 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor I2C SPI 3-Axis Gyroscope Accelerometer Magnetometer Sensor Module

Basic information: module model: GY-9250.
Power supply: 3-5V (internal low dropout voltage regulator).
Communication: standard IIC communication protocol.
Internal structure: this module uses the MPU-9250, and combines a 3-axis gyroscope, a 3-axis accelerometer and a 3-axis magnetometer which are integrated into a single QFN package.
Reliable chip: the MPU-9250 integrates a 3-axis magnetometer AK8963, which features smaller size compared to previous generation and sensitivity improvement with 0.15 μT/ LSB.
The 16-bit AD converter is embedded in the chip, with 16-bit data output.
Quality process: the 9-axis sensor module features the immersion gold PCB, which uses the machine welding process to make it work fine.
Applications: DTV and set-top boxes are applied to internet connection.
Wearable sensors are applied to fitness equipment and sports.

Check Stock

Honeywell Lynx Touch L5210 Home Automation/Security Alarm Kit with WiFi and Zwave Module

Kit Includes LYNX Touch 5210 Control Panel with Transformer and Battery Backup (3) 5815 Slim Door/Window Transmitters, (1) 5834-4 Four-button Wireless Keyfob & (1) 5800PIR-RES Wireless Motion Detector.
Integrated Z-Wave Support via L5100-ZWAVE Z-Wave Control Module (Included) for up to three thermostats (HVAC system or battery powered) with 1°F and 0.5°C set points Four door locks - Jammed locks reported to Honeywell Total Connect Remote Services 40 devices (lights, switches and lamp modules) 20 scenes 20 rules (event-based actions) 20 schedules (time-based actions) Sunrise/sunset lighting control Randomized lighting control.
Wi-Fi via L5100-WIFI Wi-Fi IP Communication Module (Included) for L5210 IEEE 802.11 B/G/N radio Supports alarm reporting Supports two-way voice LYNX Connect app supports up to four mobile iOS and Android devices. Internet Central Station Communication with L5100-WIFI or ILP5 Module.
Control Panel Dimensions (approx) 6.1" H x 8.5" W x 1.71" D (15.5cm H x 21.6cm W x 4.4cm D).
**PAID MONTHLY SERVICE REQUIRED FOR HONEYWELL'S TOTAL CONNECT REMOTE SERVICES**.

Check Stock

Honeywell YTL9160AR1000 E-Connect Wireless Programmable/Non-Programmable Line Volt Thermostat Kit

Equipment Interface Module (Eim): All Hvac Equipment Is Wired To The Module. Module Receives Communication From The Wireless Devices.
Return Air Sensor: Works With The Equipment Interface Module To Maintain Safe Indoor Temperatures If Power Is Lost At The Wireless Thermostat. Maintains 62 F For Heating And 82 F For Cooling.
Red Link Wireless Technology: Powered By Red Link Reliability. No Interference With Other Wireless Devices In The Home.

Check Stock

TREBLEET Ethernet Adapter for Nintendo Switch USB 3.0 to 10/100/1000 Network RJ45 LAN Wired Adapter

Through this product, the Switch or Switch Lite host can be connected to a more stable wired network without the need of the dock..
When the Switch or Switch Lite host is being connected via the Ethernet Adapter, the mounted LED indicators will light up, where you can see the communication status at a glance..
According to the communication standard, it is possible for the Ethernet Adapter to connect at a maximum speed of 1000 Mbps..

Check Stock

ACEIRMC 4pcs AT-09 Bluetooth 4.0 Transceiver BLE Module Serial Port CC2541 HM-10 MLT-BT05

The AT-09 is a module that contains a BLE chip (CC2541)..
This small size Bluetooth 4.0 TTL transceiver module allows your target device communicate with for iPhone/iPAD, IOS 6 or Android 4.3 above devices..
This module allows to perform serial communication with the BLE chip thanks to an Rx and a Tx pin..
When the Bluetooth connection is not established, the baud rate, name, and pairing password can be set by the AT command. After the setting, the parameter is saved after power-off, and the Bluetooth connection automatically switches to the transparent transmission mode..
The module is also very similar to the HM-10 module and is also compatible with it so if you have some experience with the latter, you will get started quickly with the AT-09..

Check Stock

VXDIAG SVCI J2534 Diagnostic Interface Supports SAE J1850 Compatible for Ford Mazda Scan Tool

VXDIAG SVCI J2534 can compatible with SAE J2534-1 and partly compatible with SAE J2534-2. It supports most of vehicle communication protocols and can....
High speed host communication and Stable host communication. (with RTS/CTS flow control).Host communication is high-speed and stable, keeping the....
[Switch on the Interface] There is a switch button on the interface. Please do press the switch button for the Module you want enter in. Pressed:....
VXDIAG SVCI J2534 is compatible with Ford / Mazda IDS,Only need to do two steps to Installs software. First,Install FVDI J2534 start software,then....
For software installation, please feel free to contact our online customer service..

Check Stock

Honeywell YTH5320R1025 Wireless Non-Programmable FocusPRO Kit with Wireless Adapter Allows to be Used with TrueZONE Panel

WIRELESS FOCUSPRO THERMOSTAT: Same great features of the FocusPRO thermostat – now wireless. Installs in minutes. Displays outdoor temperature and humidity. 2 month low battery warning. Dual Fuel enabled..
EQUIPMENT INTERFACE MODULE (EIM): All HVAC equipment is wired to the module. Module receives communication from the wireless devices..
RETURN AIR SENSOR: Works with the Equipment Interface Module to maintain safe indoor temperatures if power is lost at the wireless thermostat. Maintains 62 F for heating and 82 F for cooling..
REDLINK WIRELESS TECHNOLOGY: Powered by RedLINK reliability. No interference with other wireless devices in the home..

Check Stock

Ingcool 4G/3G/GNSS HAT Module for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH,Jetson Nano, Based on SIM7600A-H, 4G/GNSS Module Support LTE CAT4 up to 150Mbps for Data Transfer, etc.

SIM7600A-H 4G HAT is a 4G/3G communication and GNSS positioning module, supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH series boards, Compatible with Jetson Nano, SIM7600A-H 4G module control pins can connect with host boards like Arduino/STM32.
Supports dial-up, telephone call, SMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
Connect the 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc..
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).

Check Stock

ACEIRMC 3pcs W5500 SPI to LAN Ethernet Network Module TCP IP STM32 Interface 3.3V 5V for Arduino WIZ820io RC5

Power supply mode:3.3V external power supply, current should be more than 200mA.
USR-ES1 is the Ethernet module of a SPI interface, interface is TTL level of 3.3V, power supply voltage of +3.3V, please ensure that the current is not less than 200mA, voltage is continuous and stable +3.3V..
W5500 SPI to LAN Ethernet Network Module TCP IP STM32 Interface 3.3V 5V for Arduino WIZ820io RC5.
Control interface:The TTL level, 3.3V SPI interface.

Check Stock