ReviewsEthernet Serial To Wifi

JacobsParts WT32-ETH01 ESP32 Module Ethernet WiFi Bluetooth Development Board 100Mbps RJ45

  • The issue with the top soldered pins has been resolved, they are now shipping with separate unsoldered pins WT32-ETH01 is an embedded serial to Ethernet module based on the ESP32 series WT32-S1 MCU. The module integrates an optimized TCP/IP protocol stack, which is convenient for users to easily complete the networking functions of embedded devices while reducing development time cost. In addition, the module is compatible with half-pad and through-hole connectors..
  • The board width is a universal width and therefore, it can be directly soldered to boards, connectors, or even breadboards, which is convenient for users to use in different scenarios..
  • ESP32 series IC is an integrated 2.4GHz Wi-Fi and Bluetooth dual-mode SOC, with ultra-high RF performance, stability, versatility and reliability, as well as ultra-low power consumption..
  • ESP32 Module: WT32-S1 240MHz dual core microprocessor 4MB SPI flash memory Oboard 10/100Mbps RJ45 Ethernet (LAN8720A PHY) 802.11n WIFI Bluetooth 4.2.
Check Stock

NETGEAR CM500-100NAR DOCSIS 3.0 Cable Modem with 16x4 Max Download speeds of 680Mbps. Certified for XFINITY by Comcast, Time Warner Cable, Cox, Charter & More (Renewed)

  • Netgear Certified Refurbished product is manufacturer refurbished to work and look as new with 90 Day Warranty and email support. All accessories are included with limited documentation and additional information online..
  • Eliminate monthly cable modem rental fee's ($120 or more a year)..
  • DOCSIS 3.0 Cable Modem with 1 Gigabit Ethernet port..
  • Up to 680Mbps download and upload speed. Separate router required for WiFi. 16x4 channel bonding.
  • Netgear Refurbished product may have a removed serial number. You will need to state the product is refurbished (state the full part number) if emailing customer support. See the attached (image) flyer to obtain the Serial Number and MAC Address information that maybe needed by your Cable provider before contacting them..
Check Stock

VONETS 2.4GHz WiFi Module/Mini Router/WiFi to Ethernet Bridge/Hotspot Signal Repeater/Extender/Amplifier/AP, USB/DC Powered with 2 RJ45 Ports for DIY Industrial Engineering Network Device VM300-H

  • 【WiFi to Ethernet or Ethernet to WiFi convert】Industrial Mini 2.4GHz WiFi Module/Mini WiFi Router/Wireless Ethernet Bridge/Repeater (small size).
  • Can achieve WiFi to Wired or Wired to WiFi function.
  • Support WiFi 802.11b/g/n, WiFi rate:300Mbps.
  • 2 Ethernet ports 10/100Mbps adaptive (USB/DC power supply cable.
  • 【Support wide voltage】DC5V-15V(Typical 5V/1A, ripple less than 100mV), two-stage automatic overvoltage protection (Protection voltage upper limit 15.5V), USB or DC optional powered mode.
  • the suggestion is: this device cannot use the USB or DC directly plugged into the computer for power supply, it needs to be powered by an independent standard 5V/1A power supply..
  • 【Support two kinds of application methods】: Router mode.
  • WiFi Bridge ( IP layer or MAC layer transparent transmission).
  • WiFi Repeater (WiFi signal repeater), can extend WiFi transmission distance.
  • 【WiFi hotspot automatic reconnection】two hotspot matching methods: Full match authentication mode, SSID and password authentication mode, Support SSA signal strength detection reporting function, motion detection function and memory hotspot(Up to 100) automatic matching connection fu....
Check Stock

StarTech.com 1 Port RS232 to Ethernet IP Converter / Device Server - Aluminum - Serial over IP Device Server - Serial to IP Converter (NETRS2321P)

  • ACCESS YOUR SERIAL DEVICES REMOTELY: Use this RS232 to Ethernet IP converter to connect to, configure and remotely manage an RS232 serial device over an IP network.
  • DURABLE CONSTRUCTION: Built with a rugged aluminum housing, this serial to IP Ethernet device server delivers a reliable performance that can be used in almost any environment.
  • FLEXIBLE INSTALLATION: This serial to IP converter can be mounted to a surface or on a DIN rail with the built-in mounting bracket and included DIN rail clips.
  • Access a serial device from anywhere with an IP-based connection.
  • Mount on DIN-rails or on a wall with the attached mounting brackets.
  • Suitable for hash environments with a rugged, aluminum enclosure.
  • Configure via web browser or Virtual Com software interface.
  • Support for DHCP, HTTP, ICMP, ARP, IP, UDP, TCP.
Check Stock

BrosTrend AC1200 WiFi to Ethernet Adapter, 1200Mbps Dual Band Universal Wireless Bridge for Printer, Smart TV, Blu-Ray Player, PlayStation, Xbox, etc, WPS Easy Setup, Connect a Wired Device to Wi-Fi

  • CONNECT YOUR WIRED DEVICE TO Wi-Fi: by Using this Dual Band Ethernet to Wireless Adapter, your Ethernet-enabled Devices can Access the Internet via Wireless Connection, Powered by Electrical Outlet.
  • WORK WITH ANY ETHERNET ENABLED DEVICES: This Wireless to Ethernet Adapter Supports Smart TV, Game Console, Blu-Ray Player, Network Printer, Raspberry Pi, Ethernet Switch or Computer etc., No Driver Installation or Update Needed.
  • AC1200 FASTER WIRELESS SPEED: Up to 867Mbps on 5GHz WiFi or 300Mbps on 2.4GHz WiFi, Excellent for Online Video Streaming, Gaming, High Quality Music and Facebook by Using this 802.11ac WiFi to Ethernet Adapter, 4 X Speed of N300.
  • UNIVERSAL COMPATIBILITY: This 5GHz Universal Wireless Adapter Works with Any 802.11ax/ac/a/b/g/n WiFi Routers.
  • Tech Support Email [email protected].
  • 24-MONTH WARRANTY of UNCONDITIONAL REFUND OR REPLACEMENT.
  • BETTER WIFI SIGNAL: The Ethernet Wireless Adapter comes with 2X Angle Adjustable External Smart WiFi Antennas which Pick up Stronger WiFi Signal than Internal Ones.
Check Stock

Treedix Mini Pocket AVR Programmer Reset Reprogrammed Module Bootloader BootRescure Compatible with Arduino Controller Board

  • Development board production tool, no other equipment or compiler necessary, Abnormal status recovery bootloader, DIY development board writing bootloader..
  • Used to reprogram the Arduino BootLoader to the microcontroller chip..
  • Easy to program through the ICSP (In-Circuit Serial Programming) interface. Just directly plug it onto the ICSP interface to complete the bootloader..
  • This module can be connected to the ICSP interface, which is the 6 pin headers terminal on the Arduino controller board, which match 5V, MISO, MOSI, SCK, GND and RESET..
  • Compatible with Arduino UNO/UNO Wifi/Nano/Ethernet/Pro/Pro mini/Duemilanove/Diecimila/Mega/Mega 2560/Mega ADK/Leonardo..
Check Stock

Ubiquiti PoE Adapter

  • GET BETTER WIFI. Use Coaxial to ethernet Adapters between your router and access point to dramatically improve your WiFi speeds and performance throughout your entire home, delivering Gigabit speeds to all your connected devices. Extend the reach of your WiFi by creating an Ethernet over coax (MoCA) network at every coax outlet in your home..
  • CONVERT COAX WIRING INTO GIGABIT ETHERNET to create a bigger network pipe to connect any Ethernet device, such as a gaming system, streaming 4K HDTV, computer, WiFi router or extender, to increase bandwidth and coverage. The HT-EM4 Ethernet over coax adapters convert your existing coax cable outlets into an Ethernet network to deliver an extremely reliable and fast, wired network connection for all of your bandwidth-hungry applications such as online gaming, streaming videos and video calls..
  • INCLUDES TWO COAX CABLES. You will no longer need to go hunting for another Coax cable. This kit includes everything you need to setup and create a MoCA network..
  • PLUG N PLAY SET UP. Simply connect an HT-EM4 MoCA Adapter to any coax outlet and into your WiFi router or access point. Connect the second MoCA Network Extender into the device you want to connect to the Internet with an Ethernet cable. Two MoCA Adapters automaticall....
Check Stock

MOXA NPort 5150A - 1 Port RS-232/422/485 Serial Device Server, 0 to 60°C Operating Temperature

  • Connect to configure and remotely manage an RS-232 serial device over an IP network.
Check Stock

Vonets VAP11AC 2.4G+5G AC1200 WiFi Bridge/Wireless Signal Repeater/WiFi to Wired RJ45 Ethernet Powered by USB/DC, Good Partner for Security System, IP Camera

  • ✅【Support Wired Devices to Connect to WiFi】This mini dual-band AC1200 WiFi Bridge/Wireless Repeater/WiFi to Ethernet Converter enables WiFi to Ethernet or Ethernet to WiFi function, allowing most Ethernet devices to access the Internet through a wireless connection.
  • ✅【Standard WiFi Parameters】Dual-band wireless bridge with fast WiFi transmission rate: 300Mbps (2.4GHz) + 900Mbps (5GHz), supports WiFi 802.11A/B/G/N/AC protocols, 2.4G has strong anti-interference capability, 5G can greatly improve the transmission rate and distance, in the absence of obstacles and small data The transmission distance is greater than 100m, less than 100m when used for video transmission.
  • ✅【Multiple Power Supply Options Available】A USB/DC power cable, wide voltage DC5V-15V power supply, USB typical 5V/2A power supply (ripple preferably less than 100mV), two-stage automatic overvoltage protection (protection voltage upper limit 15.5V), a 10/100Mbps adaptive Ethernet cable (30cm), can be plugged into the network port of wired devices.
  • ✅【Suitable For A Variety of Environments & Network Devices】1. WiFi Signal Repeater: can extend WiFi transmission distance；2. WiFi AP Hotspot：suitable for use in hotel rooms；3. WiFi Bridge,：suitable for use in wired....
Check Stock

RONGTA 80mm Thermal Receipt Printer for Restaurant Kitchen, POS Printer with Auto Cutter Sound Light Remind, USB Serial Ethernet Interface for ESC/POS, Support Windows/Mac/Linux Cash Drawer (RP850)

  • ...ng speed--300mm/s, Low noise, Long life for use. Easy for paper installation. Have sound and light Indicator, order reminder function, can set with printer tool.
  • Compatible: Can install printer via TCP/IP. The printer box has a CD which include the User guide and driver set up guide (pdf), can connect via USB/Serial/Ethernet, tell us if you have question. Compatible with ESC/POS/OPOS command, Support WIN2003/WINXP/WIN7/WIN8/WIN10/LINUX/Mac.
  • Sound Set: If you don't need the sound remind, you can set in the printer tool(download from the CD or contact our official website). Step is found the options "Other"-Volume Set-Voiceless-Set. Tell us if you have any question with it.
  • Wall Hanging Design: With two hanging holes on the bottom support wall mount hanging, save the place. USB Serial Ethernet interface. Print width:79.5±0.5mm.
  • Paper Width:3 1/8" (80mm). Work with 3 1/8 x 203ft direct thermal receipt paper. With auto cutter and compatible with several operating systems.
  • Warm Tips: Not compatible with Clover pos/grubhub/Square/chromebook/UberEats/Doordash/Postmates. Manual provides effective driver connection guidance for the wired printer. Please check if it is compatible before use, Contact us if you have any question about use, we will try solve for you....
Check Stock

VONETS VAR11N-300 Portable WiFi Router 2.4GHz WiFi Bridge Wireless Repeater WiFi Hotspot to Ethernet WAN/LAN 2 RJ45 Ports(10/100Mbps) DC/USB Powered for Hotel IP Printer Network Devices

  • 【Industrial WiFi Bridge/Router/Repeater】2.4GHz mini wifi bridge, using three-in-one technology: professional wifi router, wifi bridge, wifi repeater, it can also act as a portable WiFi hotspot. Can achieve WiFi to Wired or Wired to WiFi function（Ethernet to WiFi, WiFi to Ethernet Adapter).
  • Support WiFi 802.11b/g/n, WiFi rate:300Mbps..
  • 【Support Two WiFi Working Modes】(1)WiFi smart bridge mode: ① It can smart control the device WiFi mode.
  • ②WiFi AP Client (WiFi client): it can be used for access from WiFi to wired Ethernet, suitable for IP TV, STBs.
  • ③WiFi Hotspot (AP Station mode): it is suitable for hotel room usage.
  • ④WiFi Repeater (WiFi signal repeat): it can extend the distance of WiFi signal coverage, WiFi transfer.
  • (2)WiFi router mode: WAN port connection type support: WiFi WAN (uplink)..
  • 【Point-to-Point Transmission Distance】Maximum can be up to 50 meters when without obstacles and small data, WiFi Tx Power:14.5dBm, 2 X 1.5dBi built-in antennas.
  • Good Partner for PLC, robot, hotel WiFi, home WiFi, Medical devices, Network Printer, IP devices, electronic scale, monitoring application, video or data transfer, and more network applications, easy....
Check Stock