ReviewsEthernet To Can Bridge Module

5.8G Wireless Bridge PTMP WiFi PTP Point to Point Long Range Outdoor Wireless Access Point Extender Network CPE 2KM Transmission Distance with 12DBi Antenna 2 LAN 100MBps 24V PoE Power Supply 2 Pack

  • Bluedery CPE220 network bridge is a 5.8G Long Range Wi-Fi Extender Outdoor Wi-Fi Ethernet bridge with a digital display. It complies with the 802.11a and 802.11n, standards to ensure interoperability. Point-to-point pairing also can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, make the long-range wireless coverage, data transmit, and wireless monitoring simple and professional..
  • PTMP Pre-programmed: The installation of this Wi-Fi outdoor extender aka long range outdoor wireless access point extender is very simple. Simply connect the both bridges to Poe adapters through the Ethernet cables, system will power on, and wait for 1 minute for the both equipment to pair and connect together, the "Link" green LED indicator will turn on to indicate that the both bridges have been paired successfully..
  • Using 5.8G / 100Mbps wireless transmission rate between wireless Ethernet bridge can support 1.2 miles transmission distance (Barrier-free), and can provide up to 100Mbps wired network speed, suitable for connecting the networks in 2 or more buildings, internet access sharing, remote video camera surveillance, or remote network Wi-Fi access..
  • Long Range Wi-Fi Extender Point to Point Mode:....
Check Stock

Heayzoki Power Supply Module for Raspberry Pi 4B / 3B + Ethernet POE Fan Electronic Component,for Raspberry Pi Ethernet POE Fan Power Supply Module

  • This product provides a convenient and cost-effective way to power equipment..
  • This module allows you to apply DC voltage to specific pairs of Ethernet cables so that devices connected to the network can use it as a power source..
  • This module is ideal for any PoE application with limited space, such as IP cameras, biometrics, readers, network audio, etc..
  • For Raspberry Pi Ethernet POE fan power supply module, supports for Raspberry Pi 4B/3B+, provides clean and reliable power supply..
  • With small size, easy to carry and store, convenient to use and with good performance..
Check Stock

Philips Hue 2-Pack Wall Switch Module (For Philips Hue lights only), White

  • KEEP YOUR LIGHTS POWERED ON AND REACHABLE: With the Philips Hue wall switch module, your lights are always on and connected to your smart lighting system..
  • CONTROL LIGHTS, ROOMS, OR A ZONE: Use your existing light switch to control your Philips Hue smart lights in a Room or Zone..
  • CYCLE THROUGH UP TO THREE LIGHT SCENES: Use your existing light switch to set up to three different light scenes..
  • BATTERY INCLUDED: The Philips Hue wall switch module includes a battery with a minimum lifetime of five years..
  • HUE BRIDGE REQUIRED: The Philips Hue wall switch module requires a Hue Bridge..
Check Stock

Large Current 50A H-Bridge High-Power Single-Channel Motor Driver Module Semiconductor Refrigeration

  • 【H-bridge Driver Module】The drive uses a full H-bridge driver module full-bridge MOSFET driver chip and composed with very low internal resistance and high current. MOSFET H-bridge driver circuit, with strong drive and braking effect, signal isolation chip isolates motor drive effectively..
  • 【Effective Protection】With the microcontroller PWM signal isolation, effectively protect microcontroller..
  • 【Input Maximum】To achieve the motor forward and reverse rotation, two PWM input maximum 200kHz frequency..
  • 【Fully Compatible】Power indicator is schematically clear. The power supply voltage 5V to 15V. 3.3V to 12V, PWM level is fully compatible. High current 50A..
  • 【Warm Tips】Ffor your safety and protection of use, our product is tested to ensure trouble-free installation and performance, please rest assured to buy..
Check Stock

VONETS VAR11N-300 WiFi Bridge/Wireless Repeater/Mini Router/Ethernet to WiFi Convert with WAN/LAN 2 RJ45 Ports for Hotel IP Printer, Network Devices

  • ...ter, can achieve wifi to wired or wired to wifi function, to meet your wifi dongle, repeater needs（The default is router mode, you can switch the mode）.
  • ✅【Support Multiple Modes】(1)WiFi smart bridge mode: ①Smart control the device wifi mode.
  • ②WiFi AP Client: it can be used for access from wifi to wired ethernet.
  • ③AP WiFi Hotspot: it is suitable for the hotel.
  • ④WiFi Signal Repeater: it can extend the distance of wifi transfer.
  • (2)WiFi router mode: WAN port connection type support: WiFi WAN (uplink)..
  • ✅【Configuration & Parameters】Support WiFi 802.11b/g/n, WiFi rate: 300Mbps.
  • Point-to-point transmission distance: maximum can be up to 50 meters when without obstacle and small data..
  • ✅【Power & Specifications】Powered by wide voltage DC5V-15V(Typical Power supply 5V/1A, ripple less than 100mV is recommended).
  • DC/USB optional powered mode optional. The card size has two ports, 1 WAN, 1 LAN, and the two ports can be interchanged..
  • ✅【Application Scenario】VAR11N-300 can support WiFi to ethernet or ethernet to WiFi, Good Partner for PLC, robot, hotel WiFi, home WiFi, Medical devices, Network Printer, IP devices, electronic scale, monitoring application, video, data transfer, and more network applications, easy to set up..
Check Stock

RPi 3.3V to 5V 26 I/O Bidirectional Voltage-Level Shifter Module for Raspberry Pi, Logic Level Converter

  • Reliable and suitable for a wide range of uses..
  • High conversion efficiency, simple regulating operation..
  • Modbus TCP Ethernet Remote IO Module (8DI+8DO+8AI+RJ45+RS485).
  • The M160T Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module,.
  • It provides multi I/O, supports standard Modbus TCP, can be intergraded into SCADA, OPC server, and other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, monitoring system, automatically measurement and control system..
Check Stock

Wireless Bridge Gigabit Outdoor, OOKOO 5.8G WiFi Bridge Point to Point for 3KM Extend Network, High Speed Ethernet Bridge with 24V PoE Adapter 16dBi Antenna IP65 Waterproof, 2Pack

  • 【3KM Outdoor long-distance transmission】This point to point wireless bridge outdoor built-in 16dBi high gain Antenna, which can meet long-distance wireless transmission within 3KM, enables efficient transmission rate between 2 wireless ethernet bridge in indoor or outdoor scenes. The outdoor IP65 waterproof and dustproof shell with sunscreen, windproof and freeze resistance seal design is adopted to easily adapt to various harsh weather environments for decades..
  • 【5.8G Technology】The 5.8G frequency enables WiFi ethernet bridge a better anti-interference performance, good compatibility and strong anti-adjacent channel interference. Our gigabit wireless WiFi bridge is more suitable to use of scenes with high requirements for data transmission, such as in factories, office, warehouses, farms, elevators and other scenes where cameras are relatively dense, to ensure high-speed video transmission or achieve stable and smooth video monitoring..
  • 【Energy Conservation Techniques】By applying dynamic energy-saving delivery and APSD technique, this point to point wifi bridge kit intelli....
Check Stock

5.8GHz Outdoor Wireless Bridge Point to Point Access PTP/PTMP Plug & Play CPE Network 100Mbps 1.8ML Long Range Outdoor WiFi Extender with 14DBI High Gain Antenna POE Power Adapter

  • ...net to remote location up to 3KM (Barrier Free) and its point to point paring function save you much time and effort from complex wire setup process. It is a simple, easy and professional way for long range wireless coverage, data transmit, wireless monitoring..
  • [Easy Installation]: Pre-configured WiFi extender with ethernet port with build in 14dBi panel antenna, the transmit/receive (point to point) wireless distance more than 3KM meters. Suitable for long range video transmission point to point WiFi cover, it supports Wireless AP, Wireless Repeater, Bridge mode, default Pre-program WDS mode, no need setting, it can work two unit at the same time, no need long cable for connect to camera with your PC.
  • [Long Range Transmission Distance]: Up to 3km, actual application distance should be less than 3KM. Built-in 14DBi directional antenna can significantly improve the transmission and reception performance of wireless signals. Trees will not block the transmission speed of the wireless bridge, suitable for warehouses or garages next to your house. The point to point bridge outdoor is a cool WiFi access point extender. Share the same network with your garage, barn, stable, warehouse, shop ect..
  • [Widely Applications]: Any place required cameras Point to Poin....
Check Stock

Dual Gigabit Ethernet Base Board Designed for Raspberry Pi Compute Module 4 Lite/EMMC Series Module, Include ETH/CSI/DSI/RTC/HDMI/Micro SD/USB Interfaces, Powerful Ethernet Capability

  • 【Powerful Ethernet Capability】Dual Gigabit Ethernet Base Board designed for Raspberry Pi Compute Module 4, suitable for evaluating the Raspberry Pi CM4 or being integrated into end products.
  • 【Connecting with Compute Module 4】Standard CM4 socket and color-coded Raspberry Pi 40PIN GPIO header, suitable for Compute Module 4 Lite/EMMC series module.
  • 【Rich Interfaces】Providing interfaces including ETH/CSI/DSI/RTC/HDMI/Micro SD/USB.
  • 【FAN Header】5V/12V, allows speed adjustment and measurement.
  • 【SD Card Slot】MicroSD card socket for Compute Module 4 Lite (without eMMC) variants.
Check Stock

waveshare Original Raspberry Pi Compute Module 4 IO Board for All Variants of Compute Module 4,with Real-Time Clock Dual MIPI DSI/CSI Interfaces,USB Connectors

  • The Compute Module 4 IO Board is a companion board for all variants of Raspberry Pi Compute Module 4(supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products..
  • The Compute Module 4 IO Board is designed to allow you to create systems quickly using off-theshelf parts such as HATs and PCIe cards, which might include NVMe, SATA, networking, or USB. The major user connectors are located along one side to make enclosures simple..
  • Connectors: Standard Raspberry Pi HAT connectors with PoE support. Standard PCIe Gen 2 x1 socket. Various jumpers to disable specific features, e.g. wireless connectivity, EEPROM writing..
  • RTC : Real-time clock with battery socket and ability to wake Compute Module 4 Video: 2 x MIPI DSI display FPC connectors (22-pin 0.5 mm pitch cable) Camera: 2 x MIPI CSI-2 camera FPC connectors (22-pin 0.5 mm pitch cable).
  • USB: 2 x USB 2.0 connectors. Micro USB socket for updating Compute Module 4. Ethernet: Gigabit Ethernet RJ45 with PoE support..
Check Stock

CHENBO(TM)4Pcs 50kg Load Cell Body Scale Weight Weighting Sensor Half-bridge/Amplifier with 1pcs HX711 A/D Module

  • Load cell-This load sensor, sometimes called a strain gauge, is the same one found in digital bathroom scales (you know, the ones you use in January for your New Year’s resolutions, and then forget about a month later)..
  • HX711-This module uses 24 high precision A/D converter chip hx711. It is a specially designed for the high precision electronic scale designwith two analog input channelthe internal integration of 128 times the programmable gain amplifier. The input circuit can be configured to provide a bridge type pressure bridge (such as pressureweighing sensor mode)is of high precisionlow cost is an ideal sampling front-end module..
  • Hx711 SPECS-Selectable 10SPS or 80SPS output data rate.
  • Operation supply voltage range: 2.6 ~ 5.5V.
  • Package:4 x human scale load cell sensor.
Check Stock