ReviewsEthernet To Can Converter Module

2 Pieces Car Power Converter 12V to DC 6V Buck Voltage Reducer Regulator 3A 18W Waterproof Volt Module Power Supply Adapter for Auto Car Truck Vehicle Boat Solar System Accept DC 8V - 22V Inputs

  • DC 12V to DC 6V reducer converter: input voltage: DC 12V (8 - 22V wide range input).
  • High conversion: 12V to 6V DC converter has an integrated switch thin regulator module with a conversion rate of up to 96%.
  • Safe protection:: DC to DC buck converter adopts intelligent micro-processing chip, which can automatically protect against over voltage, over....
  • Multiple usage: DC converter module 12V to 6V is suitable for GPS navigation, driving recorder, electronic dog, car radio, car audio, MP3/MP4, walkie....
  • Water resistant material: alloy housing of voltage reducer converter makes it widely applicable to vehicles, security systems, hospital equipment,....
Check Stock

2 Pieces DC Converter 12V to 5V 3A 15W DC Buck Converter Module, DC to DC Reduced Voltage Regulator Car Power Converter Output Power Adapter (Right Angle Type-C Interface)

  • 12V to 5V USB converter: input voltage: 12V DC.
  • Type-c and high conversion: this DC to DC power converters have right angle type-c charging ports.
  • Featuring an integrated switch thin regulator module, the conversion rate of this DC to DC buck converter is up to 96%.
  • Intelligent protection: 12V to 5V DC converter is using intelligent microprocessing chip, over voltage, over current, over temperature, short circuit, it can be auto protection.
  • Wide application: DC converter module 12V to 5V suitable for GPS navigation, driving recorder, electronic dog, car radio, car audio, MP3/MP4, walkie talkie, surveillance system, bus display, taxi advertising screen, driving recorder, LCD TV, LED, etc..
  • Warm prompt: those devices' power must be lower than 15W when use this DC/DC converter 12V to 5V, and not Compatible with partial Samsung phones.
Check Stock

Digital Optical Audio Cable Toslink Cable - [Cotton Braided Jacket,Durable and Flexible]EMK Fiber Optic Cord for Home Theater, Sound bar, TV, PS4, Xbox & More (6.6Ft/2m)

  • ... dual small form factor LC connectors are designed for 10 Gigabit applications in SAN networks and data centers.
  • OM3 LOMMF (laser optimized multi-mode fiber) rated.
  • Compatible with all multimode 50/125 micron fiber cabling Connects to VCSEL laser network equipment such as SFP+ transceivers, Ethernet switches, media converters, industrial Ethernet devices, and optical fiber NIC's.
  • ★ WIDELY USED — It is Suitable for SFP transceivers and media converters, compatible with HUAWEI and Cisco, such as Cisco Compatible 10GBASE-SR SFP+ Transceiver Module, Cisco SFP-10G-SR Gigabit Interface Converter SFP Module, Cisco SFP-10G-SR 10GBase-SR SFP+ Transceiver, Cisco Compliant 1000BASE-SX SFP Transceiver Module GLC-SX-MM-OEM, Cisco MGBSX1 Gigabit SX Mini-GBIC SFP Transceiver, Cisco GLC-SX-MMD, Cisco Gigabit SX Mini-GBIC..
Check Stock

StarTech.com Multimode (MM) SC Fiber Media Converter for 10/100/1000 Network - 550m Range - Gigabit Ethernet - 850nm - Full Duplex (MCMGBSCMM055)

  • ETHERNET OVER FIBER EXTENSION: Use this fiber media converter to convert and extend a 1000Mbps Gigabit Ethernet connection up to 550m / 1804ft over Multimode SC fiber on 1000BASE-SX networks..
  • ADVANCED FEATURES: This SC fiber media converter provides a switch supporting the Link Fault Passthrough (LFP) function, LED indicators for simple monitoring and supports a full duplex operation..
  • PLUG AND PLAY: Designed for ease of use, this copper to fiber media converter provides a quick and easy setup. It can be used as a standalone device or mounted to a wall..
  • MAXIMUM DURABILITY: Built to withstand harsh environments, this rugged media converter has a durable metal housing, and has an operating temperature range of 0°C-50°C (32°F-122°F)..
Check Stock

CreativeKIT GLC-SX-MM,1.25G SFP 1000Base-SX, 850nm MMF, 550m DDM Transceiver for Cisco Meraki Ubiquiti and Other Open Switches

  • Overview--1.25 Gb/s 1000Base-SX Ethernet, 850-nm, Duplex LC connector, up to 550 meters. Temperature Range--0 to 70°C,Output Power: -8.2~-1dBm,Receiver Sensivity: -11.5dBm,Interface: LC.
  • Compatible Type: GLC-SX-MM ,GLC-SX-MMD/GLCSX-MM/SFP-GE-S, Meraki MA-SFP-1GB-SX, Ubiquiti UF-MM-1G, Mikrotik S-85DLC05D.
  • Stable Transmission -- This 1000BASE-SX SFP supports 550m stable link lengths over Dual LC OM3 multi-mode (MMF) fiber. Each SFP transceiver module is individually tested to be used on 1G switches, routers, servers, NICs, media converter and other transmission equipment that support SFP modules..
  • Wide Compatibility -- for Cisco, Meraki, Ubiquiti, Mikrotik, D-Link, Supermicro, TP-Link, Broadcom, Linksys and Other Open Switches..
  • You will get: 1 PCS 1.25G multimode optical module + 1 PCS OM3 3-meters multimode dual fiber optical fiber (The fiber is easy to break, please do not bend).
Check Stock

Cable Matters HDMI Extender Balun - Wall Mount HDMI Over Ethernet Extender with TCP/IP Support for 1-to-Many Setup 1080p 60Hz up to 328 Feet (100m) - Support Local Monitor Loop-Out

  • Extend any audio/video HDMI connection between a computer, Blu-ray player, media streamer, or gaming console to a HDTV, monitor or projector over a single Cat 6 UTP/STP cable with this HDMI to Ethernet adapter converter.
  • HDMI over Cat5e/Cat6 cabling operates up to 328 feet.
  • HDMI Balun Extender boxes are surface mountable with included brackets and screws.
  • The HDMI over Ethernet extender comes with bonus 2-Pack of High Speed HDMI cables.
  • Connect the HDMI Ethernet extender directly with a single cable or through a dedicated unmanaged network switch over Cat 6 cabling.
  • Do not connect through a LAN or router with other data traffic.
  • Connect up to 8 additional displays by adding Receiver Boxes (sold separately) through an unmanaged, dedicated Gigabit Ethernet network switch without QoS such as the TP-LINK TL-SG1005D Gigabit Desktop Switch.
  • Lab tested with the TRENDnet 8-Port Unmanaged Gigabit Switch, TEG-S81g.
  • Control a DVD player or other HDMI video source from a remote location with the included IR cables that forward commands over a dedicated DDC channel for convenience and security.
  • The Ethernet to HDMI adapter converter is compatible with HDCP compliant equipment for viewing copy protected content and integrating with HDMI switch, splitter, or matrix e....
Check Stock

GL.iNet GL-XE300 (Puli) 4G LTE Industrial IoT Gateway, T-Mobile Only, Router/Access Point/Extender/WDS, OpenWrt, 5000mAh Battery, OpenVPN, Remote SSH, WPA3, IPv6 (EC25-AF), for North America only

  • 【SMART 4G TO WI-FI CONVERTER】Come with a standard nano-SIM card slot that can transfer 4G LTE signal to Wi-Fi networking. Up to 300Mbps (2.4GHz ONLY) Wi-Fi speeds. It can move into a 4G LTE wireless network if the Ethernet Internet fails, in order to ensure constant data transmission..
  • 【OPEN SOURCE & PROGRAMMABLE】OpenWrt pre-installed, unlocked, extremely extendable in functions, perfect for DIY projects. 128MB RAM, 16MB NOR + 128MB NAND Flash, Max. 512MB MicroSD card support. Dual Ethernet ports, USB 2.0 port, Antenna SMA mount holes reserved. Perfect for further extension and share files across devices..
  • 【SECURITY & PRIVACY】OpenVPN & WireGuard pre-installed, compatible with 30+ VPN service providers. With our brand-new Web UI 3.0, you can set up VPN servers and clients easily. IPv6, WPA3, and Cloudfare supported. Level up your online security..
  • 【Easy Configuration with Web UI 3.0 and GoodCloud】GoodCloud allows you manage and monitor devices anytime, anywhere. You can view the real-time statistics, set up a VPN server and client, manage the client connection list, and remote SSH to your IoT devices. The built-in 4G modem supports AT command, manual/automatic dial number, SMS checking, and signal strength checking in Web UI 3.0 for ....
Check Stock

DC-DC Converter Module Boost DC Step Up Voltage Regulator CV Stabilizer Power Supply Module 10-60V to 12-97V 1500W 30A

  • Stable Output: Boost module has high power and stable output, and it can also convert 10-60VDC to 12-97VDC..
  • Intelligent Temperature Control: It adopts intelligent temperature-controlled fan design, and automatically works when the temperature reaches 60°C or so. It stops when the temperature is lower than 60°C..
  • High Conversion Efficiency: Step up module is made of high quality components, ensuring high conversion efficiency up to 97%..
  • Long Service Life: Boost converter is a non-isolated DC power converter module with a long service life..
  • Widely Used: It is widely used in high-power solar street lights, various LED lighting CV drives, car and mobile equipment power supplies, DIY adjustable CV power supplies, solar charging, and various battery charging..
Check Stock

MikroTik RB260GSP

  • MikroTik FiberBox Outdoor Switch with 5-Ports SFP - Includes 1 S-RJ01 Copper Module (CRS105-5S-FB).
  • The Fiberbox is ideal for locations where distance is restricting the use of regular ethernet cables..
  • The device is weatherproof and comes with a hose clamp and zip ties, ready to be installed on high masts and towers..
  • The package also includes the RJ45 SFP (S-RJ01) copper module already preinstalled in the first port, so you can use ethernet in one of the ports already out of the box..
  • If not needed, remove it to have access to all five SFP ports for using with 1.25 Gbit fiber modules..
Check Stock

JacobsParts WT32-ETH01 ESP32 Module Ethernet WiFi Bluetooth Development Board 100Mbps RJ45

  • The issue with the top soldered pins has been resolved, they are now shipping with separate unsoldered pins WT32-ETH01 is an embedded serial to Ethernet module based on the ESP32 series WT32-S1 MCU. The module integrates an optimized TCP/IP protocol stack, which is convenient for users to easily complete the networking functions of embedded devices while reducing development time cost. In addition, the module is compatible with half-pad and through-hole connectors..
  • The board width is a universal width and therefore, it can be directly soldered to boards, connectors, or even breadboards, which is convenient for users to use in different scenarios..
  • ESP32 series IC is an integrated 2.4GHz Wi-Fi and Bluetooth dual-mode SOC, with ultra-high RF performance, stability, versatility and reliability, as well as ultra-low power consumption..
  • ESP32 Module: WT32-S1 240MHz dual core microprocessor 4MB SPI flash memory Oboard 10/100Mbps RJ45 Ethernet (LAN8720A PHY) 802.11n WIFI Bluetooth 4.2.
Check Stock

DIGISHUO Raspberry Pi 4B Model B 2/4/8GB RAM DIY Kit Case Fan SD Card Micro-SD HDMI (8G Module 8 in 1 Kit)

  • 【Raspberry Pi 4 Model B Starter Kit】 Motherboard, New SOC Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit at 1.5GHz. Capable of supporting HEVC 4K streams at 60 fps and managing 2 screens in 4K.
  • 【Fastest Raspbery Pi 4 Model B Starter Kit】Dual band 802.11b/g/n/ac WiFi (2.4/5.0 GHz) and Bluetooth 5.0 module. Transfers via 2 USB 3.0 & 2 USB 2.0 ports is faster up to 10 times, 4Gb/s or 500 MB/s. Faster Gigabit Ethernet & Power-over-Ethernet support.
  • 【64GB Class 10 SanDisk Micro SD Card】Use brand new sd card and have no noobs in it you need install system yourself.
  • 【4B Module Cooling Kit】Pi cooling fan with 4 pcs heatsink will make the pi module cooling fast.
  • 【Customized Case】will protect the pi module for well and can also work with 3.5 screen.
  • 【RAM Size Can be Chosen】You can choose 2G or 4G or 8G for your project.
Check Stock