ReviewsEvacuated Pipe Collector

POWERTEC 70122 Big Gulp Dust Hood for Woodworking Dust Collection Dust Hood

  • INCLUDES: (1) Plastic Dust Hood featuring a Big Gulp 13” x 16” opening.
  • APPLICATIONS: This catch all attachment collects a wide range of saw dust, debris and woodchips for an assortment of machines, including belt sanders, miter saws, table saws, lathes, drill press and planers without hoods.
  • BUILD: Made with premium ABS plastic, this dust collector accessory is lightweight yet durable, anti-corrosive for in and outdoor usage, and offers high impact resistance for day-to-day wear & tear.
  • COMPATIBILITY: 4-inch OD port accommodates and connects to any 4” ID dust collection system hose or pipe.
  • VERSATILE: Completely portable and can be placed behind or underneath your machine, on a workshop table close to the source, or wherever dust is being produced.
  • 4-Inch nominal end measures 3-31/32-Inch O.D. and 3-47/64-Inch I.D..
Check Stock

Burris Optics Fullfield E1 Scope, 3X-9X-50mm, Black, (200330)

  • Posi-Lock is a coil-spring assisted retractable steel post that firmly and & securely locks accuracy into place..
  • Purged at least 24 times with high quality, laboratory grade dry nitrogen. Each nitrogen cycle absorbs airborne and residual surface moisture that is evacuated from the scope.
  • Specially made quad seals to provide double insurance against leakageRecoil, water and fogproof tested.
Check Stock

Haber Fog Eliminator Goggle Fan

  • The Eliminator™ - Banish fog problems forever with this unique device available only from HaberVision..
  • Install it in your goggle, place the selector switch on automatic and forget about it..
  • When humidity rises inside the goggle, a sensor activates a fan and the warm moist air is evacuated..
  • When humidity returns to acceptable levels, the fan turns off..
  • A self-contained, fully automatic, humidity control module that converts most goggle brands into a fan goggle in minutes at a price you can afford..
Check Stock

DCT 4in Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection

  • ..., or decreasing dust collection capability.
  • No special adapters for each tool required.
  • EASY TO USE: Designed to quick connect thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
  • not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
  • SPECIFICATIONS: Constructed from heavy-duty hard plastic.
  • 1/8-inch (3mm) quick adaptor coupling thickness.
  • 4.5-inch (11.4cm) quick adaptor coupling length.
  • Fits snugly on dust ports for table saw, planer, jointer, and more.
  • CONTENTS: Package includes (1) quick adapter threaded hose coupling.
Check Stock

509 Battery Pack for Ignite Heated Lenses

  • The Eliminator™ - Banish fog problems forever with this unique device available only from HaberVision..
  • Install it in your goggle, place the selector switch on automatic and forget about it..
  • When humidity rises inside the goggle, a sensor activates a fan and the warm moist air is evacuated..
  • When humidity returns to acceptable levels, the fan turns off..
  • A self-contained, fully automatic, humidity control module that converts most goggle brands into a fan goggle in minutes at a price you can afford..
Check Stock

Polaris 509® Anti-Fog Goggle Fan for Snow Goggles Black - One Size

  • Designed For use with 509 Sinister and Aviator goggles.
  • Anti-Fog Fan installs directly into the goggles and provides airflow as needed.
  • Exhausts warm, moist air to prevent fogging.
  • SETTINGS: Off, On, and Auto, which detects fog and automatically turns the fan until the moist air is evacuated.
Check Stock

Unfinished Business - The Japanese-American Internment Cases

  • In the spring of 1942, more than 110,000 American citizens of Japanese ancestry were uprooted from their homes and businesses and incarcerated in desolate relocation camps. Without hearings or trials, men, women and children were evacuated under Executive Order 9066--the Wartime Relocation Act. UNFINISHED BUSINESS is the story of three Japanese-American resistors--Gorden Hirabayashi, Fred Koremats.
  • Amy Hill, Gordon Hirabayashi, Fred Korematsu (Actors).
  • Steven Okazaki (Director) - Jane Kaihatsu (Writer) - Jane Kaihatsu (Producer).
Check Stock

DCT 4in Plastic Pipe Threaded Coupler 1-Pack, Screw-On Flexible Hose Woodshop Woodworking Saw Dust Collection Piping

  • ...ollection Piping to complete your woodshop dust control system by connecting 2 shorter pieces of 4-inch (10.2cm) plastic pipe into one longer pipe for ductwork dust collection.
  • Threaded end screws tightly into flexible hose and tapered end offers press-on attachment.
  • Ideal for use with smaller capacity, mobile dust collectors to service multiple machines.
  • HASSLE-FREE: Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used.
  • Takes all of the work out of disconnecting and moving or switching from machine to machine.
  • Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability.
  • No special adapters for each tool required.
  • EASY TO USE: Designed to thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
  • not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
  • SPECIFICATIONS: Constructed from heavy-duty hard plastic.
Check Stock

POWERTEC 70277 Dust Collection Reducer, 6-Inch OD to 4-inch OD

  • INCLUDES: (1) Dust Collector Hose Reducer.
  • FUNCTION: Provides a reliable connection between a 6” dust collection hose to a 4” dust collection hose (not meant for PVC pipe or other plastic fittings).
  • QUALITY BUILD: Made with premium ABS plastic for strength, durability and optimal impact resistance – commonly needed for workshop and woodworking applications.
  • FEATURES: A flange that allows for a quick connect and disassembly for your convenience.
  • DIMENSIONS: 4” Nominal end actual OD size 3.93” and ID size 3.73”, 6” Nominal end actual OD size 5.93” and ID size 5.70”.
Check Stock

CRC - 3150 Precision Contact Cleaner 2000 13 oz Aerosol Can Clear

  • UNPLUG is a highly effective blend of solvents that are fast drying, nonconductive and safe to use on plastics, rubber and metal.
  • This product works quickly to remove oil, grease, dirt and grime from circuit boards, computers, magnetic tapes, printed circuits, gauges, switches....
  • Does not contain CFCs or HCFCs and is ozone safe.
  • This product is extremely flammable and must only be used on equipment that has been de-energized. It also must be allowed to dry and fumes evacuated....
Check Stock

DCT Dust Collector Accessories Kit – 1.25in x 10ft Vacuum Hose, Dust Collection Fittings, and Vacuum Reducer

  • ENHANCE DUST COLLECTOR EFFICIENCY: Create a vacuum system with the DCT | Woodworking Dust Collection 1.25” x 10’ Dust Hose with Fittings & Reducers and use to collect shavings and dust from your woodworking power tools.
  • Use as the last stage from your dust collector to your tool with 2.5-inch (6.4cm) ports with 1.5-inch (3.8cm) accessories.
  • Shopvac hose pairs with dust extractors and dust collection systems (not included) to prevent dust buildup.
  • PERFECT SIZE: 1.25-inch (3.2cm) outside diameter (OD) and 1-inch (2.5cm) inside diameter (ID) with a 1.2-inch (3cm) OD and 1-inch (2.5cm) ID small end fitting, 1.75-inch (4.4cm) OD and 1.5-inch (3.8cm) ID large end fitting, and 2.5” x 1.5” inch (6.4cm x 3.8cm) reducers to fit your attachments (measure application to ensure fitment).
  • 10-foot (3m) long vacuum hose for ample room to reach your equipment.
  • Small diameter for flexibility and maneuverability.
  • LET THE MAGIC HAPPEN: Included fittings screw into each end of the shop vacuum hose and fit snugly with the fittings on your existing power tools.
  • The small end of the dust collection pipe is ideal for connecting a random orbital sander, palm sander, biscuit joiner, or any other power tool with small dust collect....
Check Stock