ReviewsEverybodys Guide To Natural Esp 2

YLKOVA ESP8266 Programmable Development Board WiFi Test Tool ESP8266 WiFi Deauther Watch DSTIKE NodeMCU Built in 500mAh | Wearable | OLED | Attack/Control/Test Tool | Battery with OLED Display

⌚【YLKOVA WATCH】It is an ESP8266 development board, but you can wear it like a smartwatch, more convenient. Note:This project is a proof of concept for testing and educational purposes. Neither the ESP8266, nor its SDK was meant or built for such purposes..
⌚【LONG WORKING TIME】Built-in an 500mAh lithium battery, Only 80mA power usage, working time up to 3-4 hours. Comes with OLED display..
⌚【WIFI TESTING TOOL】This ESP8266 development board is installed with the latest ESP8266 Deauther software. With this software, you can perform different secure tests for your WiFi networks..
⌚【EXTENSION BOARD】You can use it to develop your own software. It is indeed a ESP8266 development board and easy to operate. NOTE: ESP8266 supports 2.4GHz only..
⌚【DISCLAIMER】This project is a proof of concept for testing and educational purposes. Neither the ESP8266, nor its SDK was meant or built for such purposes. Bugs can occur! Use it only against your own networks and devices! Please check the legal regulations in your country before using it. We don't take any responsibility for what you do with this program..

ESP32 shield 30P expansion board, supports two power supply : DC 6.5-16v and USB 5V.
The GVS output power supply can be 5V or 3.3V, which is more convenient to match the external 5V electronic module sensor..
The breakout board is only fit for 30PIN ESP32. Please confirm your esp32 board pins width is coincide with the pin width of the breakout board.
ESP32 breakout board GPIO 1 into 2 only can compatible with 30 pins ESP32S ESP32 , just for ref asin: B086MJGFVV B086MLNH7N B086MGH7JV.
This module is safe, reliable, and scalable to a variety of applications. Stable and highly reliable.Great contact and stable signal transmission for your esp32 board.

Rain Bird ESP-TM2 controllers and ESP-Me controllers manufactured after November 2, 2016..
ESP-Me controllers manufactured before November 2016 can be upgraded to accept this module by purchasing a new ESP-Me upgrade panel (sold separately).
Operates like a remote onsite and provides complete access to the irrigation system while offsite.
Simply plug the LNK WiFi Module into the accessory port on the front panel of a compatible controller.
Use your tablet or mobile device to set, monitor and make changes to watering schedules.

ESP8266 test frame burner development board work Voltage: DC 5V.
The board supports firmware one-click download function and adds programming.
Micro USB interface, this module is very easy to program..
The ESP8266 test board code burner flash downloader compatible with ESP-01 ESP-01S ESP-07 ESP-07S ESP-12E ESP-12F ESP-12S ESP-F..
ESP8266 code burner firmware downloader all IO ports have been drawn out and can be used as minimum system development board or small batch burning fixture..

Low power consumption: the development board uses 2.4GHz dual-mode Wi-Fi, chip ESP-WROOM-32, and 40nm low power consumption technology.
2.4GHz Dual Mode WiFi + Bluetooth Development Board.
Durable material: This product is made of high-quality material, durable, long service time, firm and stable in use..
Package: You will get 3 Pieces Type-C USB ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE.

1.ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE.
2.Ultra-Low power consumption, works perfectly with the for Arduino IDE.
3.SupportThree Modes: AP, STA, and AP+STA.
5.ESP32 is a safe, reliable, and scalable to a variety of applications.

2nd Generation LNK WiFi Module, direct replacement for F55000.
Compatible with all Rain Bird WiFi Controllers including ESP-ME3, ESP-TM2, ESP-Me WiFi.
Automatic weather adjustments provide daily run time changes to save up to 30% more water.
Designed for contractors who manage multiple controllers and sites and homeowners who travel.

Video tutorial: https://youtu(dot)be/oLtgUKrG6wM, ESP8266 Flash Downloader with ESP-01S Serial Module https://youtu(dot)be/gmluzujXw78.
All IO ports have been drawn out and can be used as ZUI small system development board or small batch burning fixture. The board supports one-click firmware download function, and add burning.
Compatible with ESP-01S ESP-07 ESP-07S ESP-12E ESP-12F ESP-12S ▶ Micro USB interface, this module is very easy to program..
The board supports one-click firmware download function, and add burning.
If any question, how to email us? Please click "Stemedu" (you can find "Sold by Stemedu" under Buy Now button), in the new page, click "Ask a question" to email us.

ESP32-WROVER ---A powerful and small controller with onboard camera, Wi-Fi and Bluetooth..
ESP32-WROVER Board ESP32 Development Board with Camera Wi-Fi Bluetooth Compatible with Arduino IDE.
This kit helps you learn ESP32-WROVER with its.
ESP32-WROVER Board has many features that are not available on either a single esp32 nor the esp32-cam..
package：4* ESP32-WROVER Board Module with Camera.