ReviewsExcavator Arm Boom Kit

The Tractor Song

  • BLIPPI VEHICLE! Scoop up the fun with Blippi’s Excavator - includes 3” Construction Worker Blippi!.
  • COOL FEATURES! The Excavator’s arm lifts, scoops, and cab rotates 360 degrees!.
  • SOUNDS & PHRASES Press the top of the cab for Blippi sounds and phrases - includes Excavator Song!.
  • FREE-WHEELING! The Excavator is free-wheeling, so your little speedster can zoom around the room!.
  • MORE TO COLLECT! Blippi toys come in an exciting range of plush, vehicles, blinds, & roleplay items!.
Check Stock

Blippi The Tractor Song

  • BLIPPI VEHICLE! Scoop up the fun with Blippi’s Excavator - includes 3” Construction Worker Blippi!.
  • COOL FEATURES! The Excavator’s arm lifts, scoops, and cab rotates 360 degrees!.
  • SOUNDS & PHRASES Press the top of the cab for Blippi sounds and phrases - includes Excavator Song!.
  • FREE-WHEELING! The Excavator is free-wheeling, so your little speedster can zoom around the room!.
  • MORE TO COLLECT! Blippi toys come in an exciting range of plush, vehicles, blinds, & roleplay items!.
Check Stock

QuadCast Boom Arm Mic Stand, Adjustable Suspension Boom Scissor Arm Stand for HyperX QuadCast, QuadCast S – RGB USB Condenser Microphone by SUNMON

  • 【Perfect Boom Arm】- Suspension boom arm stand fit your HyperX QuadCast suitable, you can easily adjust the mic to the suitable angle or height to show your perfect voice.Before installing your hyperx microphone to the microphone arm, you can loosen the knob and adjust it to the angle you want to tighten after installing your gaming mic..
  • 【Stability】- Mic boom arm is dual suspension springs on each boom arm, the knobs are reinforced to keep the mic arm where you want it to be,protects the HyperX QuadCast S microphone from shaking, sinking and making noise..
  • 【Mic stand】- Before you receive this mic stand for hyperx quadcast, we pre-install the silver adapter for hyperx quadcast boom arm. Mic arm adapter can be converted from 3/8"to 5/8"for adapting HyperX QuadCast..
  • 【Table Clamp Base】-Suspension boom arm comes with one desk clamp, can easily clip to any desktop up to 1.89"/4.8cm thick. The sponge on the mic stand desk base could protect your desk without any scratches when you swivel side screw..
  • 【Package】- Included: 1x HyperX QuadCast Mic Scissor Arm Stand, 1x Table mounting clamp, 1x Screw adapter (3/8" to 5/8" match most microphones and shock mount，Pre-installation completed). Note: NOT INCLUDED STREAMING MIC..
Check Stock

Large Desk Clamp Mount Replacement for Microphone Suspension Boom Scissor Arm, Table C Clip for Desktop Overhead Camera Tripod Mic Stand Lamp Base, Fits Up to 2.36 inch 6cm Thickness

  • [ 2 in 1 Versatile ] This table mounting clamp has 2 tube hole, it makes both vertical and horizontal use for the boom arm, mount your arm stand to table, bed post, sideboard, headboard.
  • [ Bigger Clamp Design ] This big c clip can mount to up to 2.36 inch/ 6cm thickness tabletop, meet your more application.
  • [ Durable Metal Built] This boom arm base is made of hight quality metal which is durable and sturdy, heavy duty mount for camera arm.
  • [ Wide Compatibility ] The both tube insert hole diameter is 0.47inch/1.2cm, it is compatible with most microphone arm like Blue Yeti mic boom arm, hyperx quadcast boom arm, rode psa1 boom arm, overhead camera arm, overhead phone arm, overhead tablet arm, overhead light arm stand, desk lamp.
  • [ Soft Foam ] The soft rubber padding can protect contact point from any scratches..
Check Stock

Neewer 2-Pack Triangle Wall Mounting Boom Arm for Photography Studio Video Strobe Lights Monolights Softboxes Umbrellas Reflectors,180 Degree Flexible Rotation,Max Length 70.8 inches/180CM Black

  • This boom arm must be fixed on a solid wall and the monolight in the picture is NOT included.
  • Compatibility: This wall mounting boom arm is perfect for supporting photographic equipment like studio video strobe lights, monolights, softboxes,....
  • Adjustable: It can be fixed on a solid wall, and its length is adjustable from 40.5 inches/103 centimeters to 70.8 inches/180 centimeters.
  • Triangle Design: More stable and reliable.
  • Each boom arm comes with 4 pieces of expansion screws helping mount the boom arm on the wall much....
  • Rotatable: The boom arm can be rotated up to 180 degrees, so you can adjust its angle and height synchronously.
Check Stock

Top Race 15 Channel Full Functional Remote Control Excavator Construction Tractor Excavator Toy with 2.4Ghz Transmitter and Metal Shovel – TR 211

  • DETAILED AND REALISTIC: The Top Race Professional Heavy Duty Excavator Toy Model (TR-211) is the most realistic replica of an excavator construction....
  • 3 SEPARATE MOTORS ON DIGGING ARM: The Top Race 15 channel construction truck is not a small kids toy, it can really dig in any direction with the 3....
  • 100 FEET CONTROL DISTANCE: The Construction toy excavator is equipped with a powerful 2.4ghz transmitter which enables you to operate at a distance of....
  • A COLLECTIVE HIGH QUALITY PIECE: The RC excavator tractor not only looks like a real excavator, but it is also as durable as a real excavator. The....
  • INCLUDES EVERYTHING: The Top Race excavator toy includes everything you need! TR-211 Excavator, 2.4Ghz Transmitter, 7.2v 400Mah Rechargeable battery....
Check Stock

kolegend 3 in 1 Remote Control Excavator Toy 1/14 Scale RC Excavator, 15 Channel Upgrade Full Functional Construction Vehicles with Tools Metal Breaker and Electric Gripper(Yellow/Black)

  • [3 in 1 RC Excavator] 1/14 large scale improved excavator toy is the most realistic replica of rc construction vehicles . Equipped with a 3-in-1 metal shovel and gripper and drill, 680° swivel cab, and the metal configuration is well-crafted and durable, it operates like a real construction vehicle..
  • [3 independent motors on the excavation arm] 3 powerful independent motors can make the excavator arm go up and down, the remote control excavator can move forward, backward, right, left, and the cab can rotate 680 degrees for all-round Dig and play without any direction restrictions..
  • [Interference Free Remote Control] The construction toy excavator is equipped with a non-interference 2.4ghz transmitter, which can support multiple cars to play together without interference, can operate at a distance of 100 feet or more, and can experience together with friends Building fun..
  • [Longer battery life] Remote control truck comes with 7.2v 400mah rechargeable battery and USB charging cable. The rechargeable battery can be charged for 4 hours and can be used continuously for about 30 minutes, providing longer entertainment performance. It is the best toy gift for boys, girls and kids..
  • [Best RC Toys for Outdoors] The excavator includes 2 colors, full yellow and bl....
Check Stock

Rockville GIGSTAND DUAL Microphone+Tablet/Smartphone Mic Stand For Karaoke Party

  • Package Includes: (1) RockvilIe GIGSTAND DUAL Microphone Stand with (2) Mic Clips and Detachable Boom. (1) RockvilIe IPS22 Smartphone/Tablet Mount - Screws In To any Mic Stand or Boom Arm. Applications: Guitar singer/songwriter (one mic for vocals and the other mic for the guitar). Studio recording use such as stereo mic arrays. Drum mics (you can mic any 2 drums with the one stand). Live performances.
  • With the lpad mount you can also mount your lpad and mic onto one stand which is perfect for speeches, sheet music playback, and more. Features: RockvilIe GIGSTAND DUAL Microphone Stand with (2) Mic Clips and Detachable Boom. The large vertical pole adjusts from 31 inch - 55 inch height. Holds 2 microphone securely in place. Foldable tripod legs with rubber grip feet. The stand includes 2 microphone clips for dual microphone mounting. One mic mounts on the large vertical pole.
  • The second mic mounts on the boom arm pole. The boom arm extends 26.37 inches and rotates 360. The boom arm is fully detachable. Premium painted steel will last through years of continuous wear. Light-weight and strong makes it perfect to take to any gig. The stand tubes are 20 mm thick for the bottom tube, and 15mm for the top tube. Includes 2 cable management clips for running ca....
Check Stock

Learn Colors of Machines with Blippi - Colorful Balls

  • BLIPPI VEHICLE! Scoop up the fun with Blippi’s Excavator - includes 3” Construction Worker Blippi!.
  • COOL FEATURES! The Excavator’s arm lifts, scoops, and cab rotates 360 degrees!.
  • SOUNDS & PHRASES Press the top of the cab for Blippi sounds and phrases - includes Excavator Song!.
  • FREE-WHEELING! The Excavator is free-wheeling, so your little speedster can zoom around the room!.
  • MORE TO COLLECT! Blippi toys come in an exciting range of plush, vehicles, blinds, & roleplay items!.
Check Stock

Rockville iSTAND 85 Dual Desktop Boom Arm + Gooseneck Mic/iPhone/iPad Stand

  • What's in the Box: Dual Stand. Smartphone/tablet holder that attaches to either the gooseneck or the boom arm. Mic clip that attaches to either the gooseneck or the boom arm. 5/8” to ¼” webcam adapter that attaches to either the gooseneck or the boom arm. 3/8” to 5/8” mic adapter for use with any mic clip or shock mount.
  • Rockville iSTAND 85 Dual Desktop Boom Arm + Gooseneck Mic/iPhone/iPad Stand. Combo stand with boom arm and gooseneck so you can use multiple devices at the same time. You can use any 2 attachments at the same time (mic clip, tablet/phone holder, web cam adapter). Heavy duty steel weighted base . Boom arm has 2 arms that both can bend allowing for the ultimate adjustment flexibility..
  • Boom arm is 12.6” + 11”. 11.8” Gooseneck is Stiff and Sturdy Yet Bendable in Any Direction For Extreme Stability and Durability . Gooseneck is detachable. Professional Stand is Perfect for Studio, Podcasting, and Many Other Applications . All black design! Even the gooseneck is black. This looks great in a kitchen or on your computer desk. For Condenser Mics – This is Compatible With Any Shock Mount (Rockville Rockshock is Recommended). 5/8” Threading Fits Any Standard Condencer Mic.
  • Features of the tablet/phone holder: (2) 360 degree rot....
Check Stock

Neewer Microphone Arm Stand, Suspension Boom Scissor Mic Arm Stand with 3/8” to 5/8” Screw and Cable Ties Compatible with Blue Yeti, Snowball, Yeti X, Quadcast and Other Mics, Max Load 1.5kg

  • 【Adjustable Microphone Boom Arm】 Conveniently adjust the angle and height of this mic boom arm to suit your vocal recording need—just loosen the adjustment knob and adjust the boom arm. It’s also easy to fold up and carry. Perfect for stage/studio recording, broadcasting, TV stations, and more.
  • 【Stable Arm Support】 With the strong springs and metal positioning screws, the boom arm is compact yet stable enough to support a load of up to 3.3lb/1.5kg. And the springs don’t get in the way of tightening the adjustment knob.
  • 【Desk Mounting Clamp】 The desk clamp has rubber padding to protect the desk surface from scratches and scuffs. Compatible with most desks with a desktop thickness of up to 2”/5.3cm.
  • 【3/8” to 5/8” Screw Adapter & Mic Clip】 The 3/8” to 5/8” adapter allows you to mount a compatible microphone (like Blue Yeti or Blue Snowball) on the boom arm. It’s not compatible with Blue Yeti Nano which has a 1/4” thread mount. The microphone clip mounts a microphone with a shaft diameter of 1.26”/3.2cm to the boom arm.
  • 【Cable Straps & Solid Base】 The five cable straps help organize your microphone cable and make the boom arm look neat. The base connector is solid for durable and reliable holding.
Check Stock