ReviewsExcavator Piston Pump

Dutton-Lainson 606-S Pistol Pump Oiler

Zinc die cast high pressure pump with ruggedly constructed precision ground piston.

Piston drum pump for dispensing corrosive chemicals such as MEK, acetone, and toluol.
Stainless steel construction for resistance to corrosion.

Internal No Leak Pump design is safer to use chemicals will not drip down your back. Internal piston pump delivers up to 150 PSI.
Durable, 21 inch poly wand with the highest quality Viton seals can be used with Wet table powders and liquids for all applications does the work of both a piston and diaphragm backpack.
Premium, lockable shut off with brass components and an in-line filter..
Easy access pump allows changing of seals in just minutes with no tools.
4 nozzles included: brass adjustable, 2 flat fans, and foaming nozzle. Also accepts Tee Jet nozzles..

Great practicability: Piston pump can self-prime and can output relatively large pressure.
Made of high quality electronic components, stable and reliable performance..
Improved configuration: The pump head is equipped with a check valve, which can control the fluid quality, reduce leakage and improve the working efficiency of the pump..
Advanced coupling structure: Adopting the coupling structure to reduce the radial and axial pressure of the motor, the motor runs more smoothly..
Live up to expectations: This water pump has sealed switch and coating to prevent corrosion, the body is sealed, to prevent incidental moisture and dust from entering. More resistant to corrosion and high temperatures, more durable..
Pump working mode: Single cylinder piston.
Inlet and outlet: 6MM outer diameter (6x9MM silicone tube is recommended).

THIS KIT INCLUDES: Piston Set, Piston Ring Set, Main Bearings Set, Rod Bearings Set, Full Gasket/Sealing Set, Thrust Washer, Freeze Plug Set (Brass), Timing Chain Kit, Oil Pump, Piston Pin Bushings, Timing Cover (Front Cover).
FITS: 85-95 Toyota / 4Runner, Pickup, Celica 2.4L L4 SOHC Naturally Aspirated 22RE,22R,22REC.
FITMENT NOTES: w/ Oil Pump & Timing Belt Or Timing Kit If Applicable, Master Kit, w/ Heavy Duty Timing Kit.
You are assured to receive a worldwide proven Engine Rebuild Kit quality part with OE quality fit and performance..
IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.

OTC's 8-Ton Bottle Jack features a rugged forged cylinder and base to ensure strength and prevent leaks, along with a chromed pump piston and ram for additional rust resistance.
In-line design (pump mechanism centered on the cylinder) makes the jack much easier operate and manuever into position with the handle compared to offset designs.
Specifications include: 4-15/16 inch long stroke, 7-13/16 inch minimum retracted height, 15-3/4 inch maximum height with screw extension, 3 inch long screw extension.
1-3/8 inch diameter saddle, 3-9/16 inch x 6 inch rectangular base.
OTC bottle jacks will provide years of reliable service, but eventally time and use will require new seals so every OTC bottle jack includes a free, life extending, seal kit.

Most popular pump design, engineered for professional use.
Premium powder coated steel pump body with ribbed section aluminum die cast pump head for maximum strength.
Built in 1-1/2” & 2” bung for use on drums with either openings.
plated steel lever handle with rubber grip for convenience.
Wear resistant brass piston rings fitted onto zinc die cast piston.
comes complete with curved metal spout & telescopic suction tube for use on 15 gallon (50 liters) – 55 gallons (205 liter) barrels.

THIS KIT INCLUDES: Piston Set, Piston Ring Set, Main Bearings Set, Rod Bearings Set, Head Gasket Set, Lower Gasket Set, Timing Chain Kit, Oil Pump.
FITS: 04-06 Ford, Lincoln / Expedition, F-150, F-250 Super Duty, F-350 Super Duty, Mark LT, Navigator 5.4L V8 SOHC Naturally Aspirated.
FITMENT NOTES: w/ Oil Pump & Timing Belt Or Timing Kit If Applicable, Master Kit, w/ 13/16 Inlet Pump.
IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.

It is recommended on Twin Cylinder Air Compressor Pumps that both cylinder sleeves and piston rings be replaced at the same time so that the air compressor pump will produce equal air output and not be out of balance..
Features:The K-0650 Cylinder and Piston Ring Replacement Kit fits many model Oil-Free air compressors.
This K-0650 Cylinder and Piston Ring Replacement kit will fit both the single cylinder oil-free pumps and the twin cylinder oil-free pump made by DeVilbiss, Porter Cable, Sears Craftsman,DeWalt, Snap On, Ex-Cell, Air America, Charge Air Pro, Grainger, Stanley Black and Decker and many other privately labeled air compressors..
Package including: 1 x Air Compressor Cylinder & Ring Kit (As Picture Show ).
Aftermarket Product,Any product questions can be contacted by email, and the customer service team will reply to you within 24 hours..

Piston drum pump for dispensing detergents, antifreeze, mild acids, and petroleum based liquids.
Polypropylene body for resistance to chemicals with nickel-plated steel and Viton components.

THIS KIT INCLUDES: Piston Set, Piston Ring Set, Main Bearings Set, Rod Bearings Set, Full Gasket/Sealing Set, Thrust Washer, Timing Belt, Oil Pump.
FITS: 96-01 Acura / Integra 1.8L L4 DOHC Naturally Aspirated B18B1.
FITMENT NOTES: w/ Oil Pump & Timing Belt Or Timing Kit If Applicable, Master Kit.
You are assured to receive a worldwide proven Master Engine Rebuild Kit quality part with OE quality fit and performance..
IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.