ReviewsExcellent Thermal Stability

Silicone Thermal Pad Excellent Alternative to Thermal Paste or Thermal Grease,6.0W/mk Plasticity Slight Viscosity Insulation,Soft Cooling SSD CPU GPU LED IC SMD DIP 100x100x0.5mm 1 Slice

  • Excellent alternative to thermal paste or thermal grease: The material of this thermal silicone pad is soft, has good compression and heat dissipation....
  • Thermally conductive pad is easy and fast to operate: Traditional thermal grease requires a lot of patience and attention during operation. Bubbles....
  • Widespread Application: Can be used for SSD hard disk cooling, HDD hard disk, NVME M2 hard disk cooling,Control board, computer host, laptop, DVD, VCD....
  • Better thermal conductivity stability: The addition of thermal silica film allows for better contact at the contact surface between the heat source....
  • Good shock absorption: Reducing vibration can effectively improve the life and operation performance of electronic devices and effectively reduce and....
Check Stock

Thermal Paste, SYY 2 Grams CPU Paste Thermal Compound Paste Heatsink for IC/Processor/CPU/All Coolers, 15.7W/m.k Carbon Based High Performance, Thermal Interface Material, CPU Thermal Paste

  • SAFETY APPLICATION: SYY is metal-free and non-conductive, which eliminates any risk of short circuit and adds more protection to the CPU and VGA card..
  • BETTER THAN LIQUID METAL: Thermal Conductivity:15.7W/m-k, it is composed of carbon particles and has extremely high thermal conductivity. It ensures that the heat generated by the CPU or GPU is effectively dissipated..
  • THERMAL COMPOUND: SYY thermal paste Edition 2020 formula has excellent component heat dissipation performance and has the stability to push the system to the limit..
  • EASY TO APPLY: SYY thermal paste has ideal consistency and is very easy to use even for beginners..
  • HIGH DURABILITY: In contrast to metal and silicon thermal conductive adhesives, SYY thermal paste 2020 will not compromise over time. After applying, you do not need to apply again because it will last at least 5 years..
Check Stock

Simond Store Castable Refractory Cement 94% Alumina Dense, 3270°F Rated, High-Temp Castable Pre-Mixed Mortar for Foundry Furnace and Induction-44 Lbs.

  • EXCELLENT MECHANICAL STRENGTH: Characterized with improved particle size distribution, reduced water demand, 94% alumina density, helps to enhance its structural strength and resistance to thermal shock compared to castable of similar compositions..
  • HIGH THERMAL RESISTANCE: This castable refractory cement when applied offers high insulation value and can resist temperature up to 3270°F / 1800°C..
  • CHEMICAL RESISTANCE: It provides outstanding resistance to the penetration of acid, neutral, and basic slags..
  • ENHANCE EFFICIENCY: Because of the low thermal conductivity and good volume stability offered, it increases thermal efficiency of the equipment..
  • APPLICATIONS: Effective in applications at places with excessive wear and abrasive heating atmosphere. It can be used for thermal combustors, chimney linings and Refractory castable is ideal for maintenance or construction of fireboxes or other combustion applications below 3270°F use to cast a dome, or inner hearth in a pizza oven. Can also be used to cast a hearth for a furnace..
Check Stock

novonest Thermal Paste,5g Thermal Interface Material,High-Performance 11.7W/m-k Grease for Cooling All Processors Graphics Cards and Fan/CPU Coolers in PC and Consoles,with Scraper Tool,PH-5

  • 【11.7W/m.k Thermal Grease】High thermal conductivity interface material, excellent viscosity and heat resistance, make your system operate with....
  • 【Conducive To Heat Dissipation】Efficiently promote the heat conduction of the cpu cooler, sense the heat and quickly enter the cooling state to....
  • 【Safe Heat Conduction】Non-corrosive and non-conductive thermal grease, avoid the risk of short circuit, safe application without affecting the....
  • 【Stability & Long-Term Durability】Highly stable synthetic thermal grease compound can be used continuously for at least 5 years at 200°C,....
  • 【Easy to use】The injection-type container accurately places the thermal paste, and the attached scraper spreads evenly for quick installation..
Check Stock

Thermalright Thermal Pad 12.8 W/mK Non Conductive Heat Dissipation Silicone Pad for PC Laptop Heatsink/GPU/CPU/LED Graphics Card, Silicone Thermal Pads 85×45mm Silicone Grease Pad Multi-Size(3.0mm)

  • Thanks to its excellent thermal conductivity, Hydronaut can be used in the overclocking sector, but it has been specially developed for users with large heatsinks.
  • The convenient syringe makes this Thermal Compound very easy to apply and goes exactly where it should. CPU and cooling, GPU, LEDs, heat dissipating ribbed plates.
  • Thermal Grease perfectly conducts heat, is safe, does not integrate with the processor.
  • Thermal conductivity 11.8 W/Mk Thermal resistance 0.0076 K/W.
  • Compatible not only with computers or laptops, but also with PS3 PS4 or PS5 Xbox 360, One, Series S and X consoles.
  • It perfectly dissipates heat from Macbooks.
  • Thermal paste Hydronaut does not harden and has high long-term stability.
  • The paste does not need hardener, does not contain silicone and does not conduct electricity.
Check Stock

Pivot Pin Tool 2-Pack - Wyvern Products

  • A convenient syringe makes this Liquid Metal very easy to apply and goes exactly where it should be: on the CPU Cooler, GPU Cooling or heat....
  • Thanks to long tests, Conductonaut has a very high thermal conductivity and excellent stability even with prolonged use. Due to its composition, it....
  • A popular choice for very experienced PC builders because of its extreme heat dissipation, but also because it conducts electricity!.
  • This thermal solution is compatible not only with computer parts or laptops, but also with consoles: PS3, 4, 5, Xbox 360, One, Series S and X.
  • Conductonaut Must not be used in conjunction with aluminum as it can permanently damage the surface and can be used directly on copper or silicon..
Check Stock

SIMOND STORE Castable Refractory Cement 45% Alumina Hydraulic Bonded Low Cement Castable, 2822F Rated, for Foundry Furnace Oven Stove Forge Lining - 12.5 Lbs

  • Excellent Mechanical Strength: Characterized with improved particle size distribution, reduced water demand, improved density, optimum cement/bond hydration, helps to enhance its structural strength and resistance to thermal shock compared to castable of similar compositions..
  • High Thermal Resistance: This refractory cement when applied offers high insulation value and can resist temperature up to 2822°F / 1550°C..
  • Chemical Resistance: It provides outstanding resistance to the penetration of acid, neutral, and basic slags..
  • Enhance Efficiency: Because of the low thermal conductivity and good volume stability offered, it increases thermal efficiency of the equipment..
  • Applications: Effective in applications at places with excessive wear and abrasive heating atmosphere. It can be put to use to precast residential fireplace, line BBQ Pit, Pizza Oven, Stoves, building Forges, Furnace Foundries and to cast custom shape and other complex or uneven structures..
Check Stock

Castrol 15D0C2 - Transmax Full-Synthetic Dexron-VI/Mercon-LV Automatic Transmission Fluid

  • Delivers extended anti-shudder durability..
  • Delivers extended clutch-friction durability..
  • Excellent corrosion and foaming resistance..
  • Excellent thermal and oxidative stability that helps to prevent deposits and oil thickening..
Check Stock

Mobil 1 120766 Extended Performance 5W-30 Motor Oil - 5 Quart 3 Pack…

  • helps prevent deposits and sludge build-up to enable long engine life.
  • Excellent overall lubrication and wear protection performance under many operating conditions.
  • precise balance of performance additives.
  • Helps provide outstanding engine protection.
  • outstanding thermal and oxidation stability.
  • Helps maintain long engine life and is compatible with engine seals.
Check Stock

Mobil 112810 Delvac Synthetic Automatic Transmission Fluid - 1 Gallon

  • For best performance, follow the manufacturer's recommendations in your vehicle owner’s manual..
  • Advanced full synthetic formula. Helps prevent deposits and sludge build-up to enable long engine life.
  • Excellent overall lubrication and wear protection performance for many driving styles.
  • Outstanding thermal and oxidation stability.
  • Outstanding performance during the maximum oil change interval recommended in a vehicle's owner's manual.
  • Quick cold weather starting for ultra fast protection.
Check Stock

A ADWITS [ 6-Pack ] Thermal Conductive Silicone Pads Soft Safe Simple to Apply for SSD CPU GPU LED IC Chipset Cooling -Blue

  • Excellent thermal conductivity: Made of thermal silica gel with heat conductivity of 6.0 W/Mk.
  • Great safety and stability: electrical insulation, in -40 ℃ - 200 ℃ will not melt. Wear Resistant, anti static, fire retardant, buffering, no....
  • Fits for Control board, motor, electronics, auto mechanics, computer host, laptop, DVD, VCD, LID, Set-top box, LED IC SMD DIP and any cooling modules.
  • Packed with 6 thermal pads, three sizes, each with 2 pieces: 20x67x0.5mm, 20x67x1.0mm, 20x67x1.5mm.
  • Easy to install, you can select most suitable thickness and cut the required sizes. Great replacement for traditional heat sink compound grease paste.
Check Stock