ReviewsExhaust Angle Cutters

LucaSng 5 Inlet 8 Outlet 36 Long Gloss Black Stainless Steel Miter Angle Cut Diesel Smoker Exhaust Stack Tip Smokers 5 ID Inlet 36 Long with Clamp

  • Made of High Quality Stainless Steel ,OE replacement assembly.
  • Inlet: 5", Outlet/Tip Size: 8", Length: 36" ,Gloss Black Finish.
  • Miter Angle Cut Diesel Smoker Exhaust Stack Tip For Diesel Exhaust Systems.
  • Fitment: Universal,For Truck, Dodge, Chevy.
  • Installation should depend on the inside diameter and outside size.
  • Package includes: 1 Exhaust Tip with 1 Exhaust Clamp.
Check Stock

Dynabrade 52711 2\ (51mm) Dia. Right Angle Depressed Center Wheel Grinder.4 hp, 15,000 rpm, Geared, Rear Exhaust, 3/8\-24 Spindle Thread

  • Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, plus heavy deburring.
  • 2" Diameter, Right Angle, .4 hp, Rear Exhaust. 15,000 RPM.
  • Includes 90999 Depressed Center Wheel (24 grit), 2" diameter with 3/8" center hole. Guard and wheel flange set also included.
  • 2" (51mm) Dia. Right Angle Depressed Center Wheel Grinder, .4 hp, 15,000 rpm, Geared, Rear Exhaust, 3/8"-24 Spindle Thread.
Check Stock

SPELAB Electric Exhaust Cutout Valve 3.0 Inch 76mm Catback Single Y Pipe with One Controller Remote Kit…

  • One-Touch Loudness: 3.0 Inch Electric Exhaust Cutout Valve Kit fit for all types of vehicles. Note: please make sure you have enough space to install before purchase and make sure your exhaust size is 3.0 inch. Professional Installation is highly recommended. 3.0” Cut-out valve Kit included: 1 x 3.0” exhaust pipe cutout valve with motor, 1 x extension harness (Length: 3.5M), 1 x wireless remote control (without battery), and 1 x control box with cigarette lighter plug..
  • Function: This Cut Out Valve System Kit is specifically designed for single exhaust pipe and made to enhance the performance and power of your vehicle by remotely controlling of cutout valve. The faster the exhaust could be pushed out of the engine, the faster the combustion process could start over which give more horsepower. Aggressive deep sound while ensures smooth exhaust gas flow. SPELAB Butt Joint Exhaust Band Clamp is recommended for installation..
  • Cutout Valve: High-quality chrome-plated steel butterfly plate and valve pipe wall thickening process. You can turn on and off from the inside of the car by remote control. Turn off the switch, keep your original, peaceful exhaust system for comfortable. Turn on the switch, you can get aggressive deep sound. The opening angle of t....
Check Stock

VIM Hand Tools V2300 Push Pin Removal Pliers Set, 2-Piece

  • [Ensure Flush Cuts]: Whether cutting wires and trimming spurs from models or removing trim clips and pins, the ABN Panel Clip Pliers Automotive Trim Pliers will create clean, precise cuts.
  • [Flat Blade Design]: Flush right angle side cutters pliers have flat 1-inch (2.5cm) long cutter blade that provides flush cuts on up to 12-gauge copper wires.
  • 2.5mm hole allows for easy insulation trimming.
  • [Finish Projects]: Flat edge trims plastic and metal from models and circuit boards.
  • Use electronics right angle cutting pliers wire snips as push pin pliers, rivet removal tools, electrical nippers, jewelry wire flush cutter pliers, craft cutters, or floral wire cutter.
  • [Trusted Quality]: Spring-loaded panel clip cutter pliers cut quickly and cleanly and open automatically, while durable forged steel construction ensures maximum strength.
  • [Anti-Slip Grip]: 4-inch (10.2cm) long rubberized handles provide a secure, comfortable grip for convenience and optimal operation of this wire clipper automotive clip removal pliers.
Check Stock

Ingersoll Rand 308B Air Straight Die Grinder, 1/4\

  • POWER: Motor delivers 0.33 HP (0.25 kW) and 25,000 rpm free speed..
  • Piped Away Exhaust Ready: These die grinders are compatible with “piped away” exhaust kits, so you can transfer exhaust away from you and your workspace..
  • DURABLE: Ball-bearing construction improves balance, reduces vibration, and ensures a longer life.
  • RELIABILITY: Integral safety-lock throttle lever prevents accidental start up..
  • LIGHTWEIGHT: At only 1lb., the ergonomic composite housing protects this tool from cold air and offers greater operator comfort..
  • Built-in lubricating wick increases angle gear life.
  • Rear exhaust directs air away from the operator.
  • Powerful motor delivers 0.33 HP (0.25 kW) and 25,000 rpm free speed.
  • Durable ball-bearing construction improves balance, reduces vibration, and ensures a longer life.
  • Strong aluminum housing withstands tough operating conditions.
  • Small and lightweight design provides easy operation greater access to tight spots.
  • Easy-to-use, integral safety-lock throttle lever prevents accidental start up.
Check Stock

LucaSng 5" Inlet 8" Outlet 36" Long Polished Stainless Steel Miter Angle Cut Diesel Smoker Exhaust Stack Tip(Smokers 5" ID Inlet 36" Long with Clamp)

  • Made of High Quality Stainless Steel ,OE replacement assembly.
  • Inlet: 5", Outlet/Tip Size: 8", Length: 36" ,Polished Silver Finish.
  • Miter Angle Cut Diesel Smoker Exhaust Stack Tip For Diesel Exhaust Systems.
  • Fitment: Universal,For Truck, Ford, Dodge, Chevy.
  • Installation should depend on the inside diameter and outside size.
  • Package includes: 1 Exhaust Tip with 1 Exhaust Clamp.
Check Stock

2Pcs Straight Aluminum Bare Cylinder Head Compatible with Chevy Small Block 302/327/350/383/400 SBC 200cc Intake 68cc

  • ▶️ High grade aluminum, bronze valve guides, hardened seats, advance port design for greater air flow.
  • ▶️ This head is 200cc intake runner with a 68cc combustion chamber, 68cc combustion chambers improve performance and retains stock compression on 1970 and earlier.
  • ▶️ Lighter than Iron Heads. Each Head weighs 10.33kg.
Check Stock

1/16\ Tip Dia. x 1/2\ Flute Length - Solid Carbide Tapered End Mill - 10 Degree Per Side

  • 3PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge.
  • Ball Raidus 1/64 inch 1/32 inch 1/16 inch, Flute Length:15MM, Overall Length: 1 Inch.
  • The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, 3D carving.
  • Suitable Material: 55HRC, Long service life, Decreasing the times of changing cutters,Saving production time.
Check Stock

MacWork Tailpipe Cutter，Exhaust Tube Chain Cutter，Features Pipe Cutter Chain/Cutting Wheels，Black

  • CUT ON OR OFF THE VEHICLE: Get a clean cut with minimal rough edges or burrs on your exhaust pipe, tailpipe, and when installing or making repairs on catalytic converters.
  • Keep well oiled, not for use on stainless steel.
  • EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
  • Lubricating the exhaust cutter cutting wheels before use will give an even smooth cutting operation and extends the life of the item.
  • EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps.
  • Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut.
  • NO POWER TOOLS NEEDED: Breaking out the Sawzall or angle grinder is unnecessary with our exhaust cutter tool.
  • Work in cramped spaces with one-handed rotation.
  • The cushion grip handles ease pressure on your hand while you increase your grip.
  • BUILT TO LAST: This quality metal pipe cutter's cutting wheels won’t dull easily during use.
  • The head of the exhaust cutting tool won’t bend from during rotation.
  • Lightly lubricate cutting wheels before use.
Check Stock

Genuine Toyota 2020 & Up 4Runner TRD Pro Performance Exhaust w/ Black Chrome Tip PTR03-89200

  • Hear your 4Runner engine roar with style. The TRD performance exhaust gives your engine greater power while giving off a bold sound..
  • Made from premium 304 stainless-steel, featuring a cat-back design with TRD logo stamped on a stylish black-chrome tip.
  • Less restrictive muffler design helps reduce back pressure, helps increase power and low-end torque.
  • Side exit tail pipe improves exhaust departure angle for better off-road performance.
  • Produces a deep and aggressive exhaust growl while meeting the legal 82-decibel noise limit, as required by law.
Check Stock

Theia technical Tips&Electrode Harbor Freight Titanium 45 Plasma cutter 56576 56811 56255 40Amp (30)

  • CUT ON OR OFF THE VEHICLE: Get a clean cut with minimal rough edges or burrs on your exhaust pipe, tailpipe, and when installing or making repairs on catalytic converters.
  • Keep well oiled, not for use on stainless steel.
  • EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
  • Lubricating the exhaust cutter cutting wheels before use will give an even smooth cutting operation and extends the life of the item.
  • EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps.
  • Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut.
  • NO POWER TOOLS NEEDED: Breaking out the Sawzall or angle grinder is unnecessary with our exhaust cutter tool.
  • Work in cramped spaces with one-handed rotation.
  • The cushion grip handles ease pressure on your hand while you increase your grip.
  • BUILT TO LAST: This quality metal pipe cutter's cutting wheels won’t dull easily during use.
Check Stock