ReviewsExhaust Clamps With U bolt Design

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp Size # 188, fit 6.5\ ID Hose, Range: 6.75\ - 7.06\ (316-SSTC-172-180)

100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
Effective range: 6. 75" - 7. 06" (172mm-180mm). SAE # 188..
Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..

Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp Size # 32, fit 1-5/8\ ID Hose, Range: 1.89\ - 2.2\ (316-SSTC-48-56)

100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
Effective range: 1. 89" - 2. 2" (48mm-56mm). SAE # 32..
Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..

Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp Size # 48, fit 2-1/8\ ID Hose, Range: 2.38\ - 2.68\ (316-SSTC-60-68)

100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
Effective range: 2. 38" - 2. 68" (60mm-68mm). SAE # 48..
Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..

Check Stock

SEUNMUK 4 Pack 2.5 Inches Exhaust Clamp Sleeve, Stainless Steel Butt Joint Band Clamp Exhaust Coupler Exhaust Band Clamp Sleeve for 2.5-Inch OD Exhaust Pipes, Mufflers

ROBUST CONSTRUCTION - The stainless steel exhaust clamp is high-quality 304 stainless steel material, well polished with smooth mirror finish and high strength, which is solid and durable to last and can be reused for a long time..
EASY TO JOINT - No welding design, the joint exhaust band clamp features a practical components including bolts, nuts and I-block, you can easily mount or disassemble them, and you can also wrap some exhaust heat tape to enhance complete sealing..
TIGHT SEALING - Uniform distribution of clamping force will not crush the pipeline, which can provide tight seal and keep off exhaust and noise leakage. The exhaust band clamp sleeve can close fit on the exhaust pipes or mufflers..
PRACTICAL AND MULTIPURPOSE - 4 packs of joint exhaust muffler clamps is designed with 2.5-inch diameter and 3 inches length, which fits for exhaust pipes or mufflers, manifolds, catalytic converters of that with an outer diameter of 2.5 inches..
SATISFACTORY SHOPPING EXPERIENCE - If you have any dissatisfaction with exhaust clamp 2.5 inch, you will get a full refund within 30 days. If you have any questions about the product, please feel free to contact us, we will provide you with a satisfactory solution..

Check Stock

2 Inch Clamps Heavy Duty 2" Stainless Steel U Bolt Muffer Exhaust Clamp Hanger for Pipes (51mm)

Package Includes: One Piece 2" Heavy Duty U-bolt Clamp (fit for OD 2 inch exhaust pipes).
The 2" stainless steel exhaust hanger with reinforced ribs on the saddle flange, expertly crafted and durable construction for long service. The high quality and craftmanship of the heavy duty clamp can resist corrosion and out of shape during use..
The stainless clamp is consisted of u-bolt, saddle flange and 3/8 Nuts..
Please check the detail information as belows. Emotor Industries value your shopping experience and strive to offer high quality product with sincere service. If you have any questions, please contact us..

Check Stock

2.5" Lap Joint Band Clamp Exhaust Clamps Pipe Repair Parts Stainless Steel

...5" ID Pipe, made of 304 stainless steel. There are 5 sizes for choose, it can meet your various needs. reducing costs and time Significantly..
The lap joint clamps 2.5" are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat back systems, racing exhaust, and show cars..
Conforms to pipe and flex tubing, exhaust pipe connector come with an "I" block provides a full 360 °equal distribution of stretching forces, without distorting the pipe, to create the best seal available without distorting pipe, This exhaust band clamp is specifically designed for exhaust pipes connection..
No welding design makes lap joint clamp fast, easy and accurate installation. It is removable and reusable. just need to put one of the nut bar on one side and insert the bolts, put another nut bar on, then screw the nuts, works done..
SYKRSS value your shopping experience, If you encounter any problems in installing the 2.5" lap joint band clamp, you can feel free to contact us via Amazon Mail. We provide 24-hour mail s....

Check Stock

EVIL ENERGY Exhaust Clamp,Narrow Band Muffler Clamp Stainless Steel 3.0 Inch

Size: joins 3.0inch OD-ID slip fit pipe, width of strap: 1.22inch /31mm..
Application: Narrow Band clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc..
Advantage: No welding design, easy to install or remove. It is recommended that put exhaust sealant on the pipes before installation..
Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
Feature: The band clamps make the force of 360 evenly distributed to provide a seal. Torque: 63 N·m..

Check Stock

EVIL ENERGY 2.0 Inch Exhaust Clamp,Narrow Band Muffler Clamp Stainless Steel

Size: joins 2.0inch OD-ID slip fit pipe, width of strap: 1.22inch /31mm..
Application: Narrow Band clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc..
Advantage: No welding design, easy to install or remove. It is recommended that put exhaust sealant on the pipes before installation..
Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
Feature: The band clamps make the force of 360 evenly distributed to provide a seal. Torque: 63 N·m..

Check Stock

ESPEEDER 2.0" Lap Joint Band Clamp Exhaust Clamps Pipe Parts Stainless Steel 2Pcs

...ade of 304 stainless steel. There are 5 sizes for choose, it can meet your various needs. Come with 2Pcs/Package. reducing costs and time Significantly..
The lap joint clamps 2.0 are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat back systems, racing exhaust, and show cars..
Conforms to pipe and flex tubing, exhaust pipe connector come with an "I" block provides a full 360 °equal distribution of stretching forces, without distorting the pipe, to create the best seal available without distorting pipe, This exhaust band clamp is specifically designed for exhaust pipes connection..
No welding design makes lap joint clamp fast, easy and accurate installation. It is removable and reusable. just need to put one of the nut bar on one side and insert the bolts, put another nut bar on, then screw the nuts, works done..
SYKRSS value your shopping experience, If you encounter any problems in installing the 2.0" lap joint band clamp, you can feel free to contact us via Amazon Mail. We provide 24-hour mail s....

Check Stock

Mopar 77072479 Dodge Durango Cat Back Exhaust

Genuine OEM Parts and Accessories offered by Molar (the Original Equipment Parts Supplier for Chrysler, Dodge, Jeep, Ram and Fiat vehicles).
Molar bolt-on, free flow cat-back exhaust systems feature T304 stainless steel construction (aircraft-quality) with mandrel-bent tubing, stainless band (Torch) clamps and polished tips.
They're rigorously designed and tested to provide horsepower and torque gains with improved fuel economy.
Give your vehicle a deeper exhaust tone without causing unwanted drone.
Vehicle must be equipped with 5. 7L Hemi Engine.

Check Stock

EVIL ENERGY Exhaust Clamp,Narrow Band Muffler Clamp Stainless Steel 3.0 Inch,2Pcs

Size: joins 3.0inch OD-ID slip fit pipe, width of strap: 1.22inch /31mm..
Application: Narrow Band clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc..
Advantage: No welding design, easy to install or remove. It is recommended that put exhaust sealant on the pipes before installation..
Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
Feature: The band clamps make the force of 360 evenly distributed to provide a seal. Torque: 63 N·m..

Check Stock