ReviewsExhaust Converters

Replacement Car Exhaust Back Pressure Tester Gauge Meter DiagnosticTool Catalytic Converter Clog Test Gauge Kit

  • Car Exhaust System Back Pressure Tester Meter Diagnostic Tool Exhaust System Diagnostic Tool Exhaust Back Pressure Tester.
  • Adaptor fits into oxygen sensor hole enabling back pressure of mufflers and catalytic converters.
  • Gauge adapter threads into oxygen sensor ports (both 12mm and 18mm). Test at idle and at2500 rpm's. Pressure should be below 1.25psi at idle and below....
  • Higher readings indicate a restriction which should be corrected..
  • Package including? 1* SET OF Car Exhaust System Back Pressure.
Check Stock

Walker Exhaust 36454 Exhaust Bolt and Spring (6 in total)(pack of 1)

  • KEEPS EXHAUST PARTS IN PLACE -- Designed to support undercar exhaust components.
  • CONSISTENT PERFORMANCE -- Spring designed with the right compression strength for a secure connection.
  • PREMIUM MATERIALS -- Made from high-quality materials for durability and long life.
  • THE RIGHT CONNECTION -- Designed to be used for ball and socket joint.
  • BETTER TOGETHER -- Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade.
Check Stock

2 Butt Joint Band Clamp Exhaust Sleeve Stainless Steel 2 Pieces

  • Removable and reusable, easy to install without welding..
  • Stainless steel clamp with great performance in anti-corrosion.
  • Durable installation without damage to pipe ends or flex hose..
  • Suitable for 2" exhaust pipe, muffler, and catalytic converters connection.
Check Stock

Floshine 2.5 in Lap Joint Band Clamps,Exhaust Muffler Clamp 4 PCS，2.5 Exhaust Pipe Clamps preformed Stainless Steel

  • Application--2.5" Exhaust clamps are a simple and quick tool for connecting exhaust system components, such as exhaust pipes, mufflers and catalytic Flexible disassembly and assembly methods allow maintenance while protecting the exhaust pipe from being twisted.
  • No welding design--This 2.5 exhaust clamp is tightly fitted 360° to evenly withstand tensile forces and prevent deformation and leakage of the exhaust pipe.No welding design of Lap joint exhaust sleeve clamp makes installation and removal easier and faster.
  • Component parts--304 stainless steel band,steel gasket,aluminum alloy I-block and zinc-plated flange bolt and nut.Make sure that the stainless steel surface is tight against the exhaust pipe and the nut is tightened when installing.
  • Non-rusting and corrosion resistant--Floshine Exhaust clamp is used for 2.5" OD to 2.5" OD exhaust pipe,mffler,catalytic converters connection.Stainless steel material has good corrosion resistance and is not easy to rust, providing a longer service life..
  • WARRANTY--Floshine offers a 5-month warranty and we are committed to enhancing the user experience.Please feel free to contact us with any questions about the product.
Check Stock

3" Butt Joint Band Clamp Exhaust Sleeve Stainless Steel 2 Pieces

  • Removable and reusable, easy to install without welding..
  • Stainless steel clamp with great performance in anti-corrosion.
  • Durable installation without damage to pipe ends or flex hose..
  • Suitable for 3" exhaust pipe, muffler, and catalytic converters connection.
Check Stock

Rislone Cat Complete Fuel, Exhaust & Emissions System Cleaner, Check Engine Light Medic

  • Increase power, performance, mileage and save gas: Cleans by not only the entire emissions and exhaust system, but the fuel system as well. Works with gasoline, ethanol and hybrid vehicles..
  • Save on expensive fuel system and emission control repairs: Regular use every 5,000 miles tunes-up the fuel, emissions and exhaust systems keeping them clean and preventing the CEL light from returning..
  • Will not void manufacturer’s new vehicle warranty: Specifically designed and safe to use on vehicles which have oxygen sensors and catalytic converters. Exceeds EPA compliance performance criteria..
  • Works on all fuel injected, direct injected, carbureted, turbo, GTDI, Ecotec and EcoBoost engines..
  • Clean fuel and exhaust systems reduce excess exhaust hydrocarbon, CO and NOX emissions and saves gas..
Check Stock

Rislone 4720 Cat Complete Fuel, Exhaust & Emissions System Cleaner, Check Engine Light Medic (4 Pack)

  • Increase power, performance, mileage and save gas: Cleans by not only the entire emissions and exhaust system, but the fuel system as well. Works with gasoline, ethanol and hybrid vehicles..
  • Save on expensive fuel system and emission control repairs: Regular use every 5,000 miles tunes-up the fuel, emissions and exhaust systems keeping them clean and preventing the CEL light from returning..
  • Will not void manufacturer’s new vehicle warranty: Specifically designed and safe to use on vehicles which have oxygen sensors and catalytic converters. Exceeds EPA compliance performance criteria..
  • Works on all fuel injected, direct injected, carbureted, turbo, GTDI, Ecotec and EcoBoost engines..
  • Clean fuel and exhaust systems reduce excess exhaust hydrocarbon, CO and NOX emissions and saves gas..
Check Stock

EVIL ENERGY 2.0' Exhaust Narrow Band Muffler Seal Clamp Stainless Steel 2PCS

  • Joins 2.0 inch OD pipe to 2.0 inch ID pipe. Exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as pipes, mufflers, catalytic converters, headers, manifolds. Torque: 63 N·m. Package: 2pcs..
  • Connection Type: ID-OD slip fit connection with either straight or "Z" compression slit. This narrow exhaust band clamp commonly use on slotted pipes or stainless steel connection where disassembly for service is likely..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion. Material: 304 stainless steel strap and mild steel hardware, serviceability, durability and reusable..
  • Easy to handle and disassemble. Suggestion: Wrap the pipe with several layers of aluminum tape over the clamping surface to take up for slight out-of-round and help seal..
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

SEUNMUK 4 Pack 2.5 Inches Exhaust Clamp Sleeve, Stainless Steel Butt Joint Band Clamp Exhaust Coupler Exhaust Band Clamp Sleeve for 2.5-Inch OD Exhaust Pipes, Mufflers

  • ROBUST CONSTRUCTION - The stainless steel exhaust clamp is high-quality 304 stainless steel material, well polished with smooth mirror finish and high strength, which is solid and durable to last and can be reused for a long time..
  • EASY TO JOINT - No welding design, the joint exhaust band clamp features a practical components including bolts, nuts and I-block, you can easily mount or disassemble them, and you can also wrap some exhaust heat tape to enhance complete sealing..
  • TIGHT SEALING - Uniform distribution of clamping force will not crush the pipeline, which can provide tight seal and keep off exhaust and noise leakage. The exhaust band clamp sleeve can close fit on the exhaust pipes or mufflers..
  • PRACTICAL AND MULTIPURPOSE - 4 packs of joint exhaust muffler clamps is designed with 2.5-inch diameter and 3 inches length, which fits for exhaust pipes or mufflers, manifolds, catalytic converters of that with an outer diameter of 2.5 inches..
  • SATISFACTORY SHOPPING EXPERIENCE - If you have any dissatisfaction with exhaust clamp 2.5 inch, you will get a full refund within 30 days. If you have any questions about the product, please feel free to contact us, we will provide you with a satisfactory solution..
Check Stock

Comp Cams 12-600-8 Thumpr 227/241 Hydraulic Roller Cam for Chevrolet Small Block, camshaft only

  • High performance street, stock converter ok, best with 2000+ converter and gears, choppy/thumping idle..
  • 227/241 Duration at .050". 107 Degree Lobe Separation Angle.
  • Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note. Best with aftermarket converters and more rear gear..
Check Stock

Permatex 82099 Spray Sealant, 12 oz.

  • J-B Weld Exhaustweld: A High Strength Fiberglass Wrap, Impregnated With A Specially Formulated Resin For High Temperature Resistant Repairs. Exhaustweld Can Resist Up To 1100°F Once It Is Fully Cured.
  • Cure And Set Time: Exhaustweld Can Cure With Or Without Heat! It Will Cure Within 20 Minutes If Heat Is Applied To It With Either A Heat Gun Or By Letting The Engine Run. Without Heat, Exhaustweld Will Set In 20 Minutes And Cure In 2 Hours.
  • High Heat Resistance: Once Fully Cured, J-B Weld Exhaustweld Exhaust System Repair Wrap Has A Temperature Resistance Of 1100°F, Allowing It To Be Used On Every Part Of The Exhaust System.
  • Applications: Manifolds, Catalytic Converters, Mufflers, Tailpipes And More.
Check Stock