ReviewsExhaust Expansion Joint

SYKRSS 2.25'Stainless Steel Butt Joint Exhaust Seal Band Clamp

  • Universal butt joint exhaust clamp fit for 2.25" OD pipe to 2.25" OD pipe, mufflers ect. quickly connect the exhaust pipe, It is removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Full clamping area to create the best seal available without distorting pipe, muffler inlets, outlets, elbow joints, flex tubing and other system connections.
  • The butt joint exhaust clamp is made in stainless steel material, not easy to rust, corrosion resistance.
  • SYKRSS is the responsible brand, strive to offer a high-quality product and service. if you encounter any problems during the installation process, feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

48" Stainless Steel Flexible Exhaust Tubing 5" Dia Flex Pipe with 2 Band Clamps

  • One pre-cut 48" section of stainless steel flexible exhaust tubing with 2 5" stainless steel exhaust band clamps This exhaust pipe is 5" in diameter and can be used to connect automotive exhaust pipes that are not lined up together.
  • The flexible nature of this type of exhaust tube allows for easily installation.
  • Flexible tubing is primarily used to help reduce and prevent excessive stress on your current exhaust system.
  • It does this by absorbing vibration and thermal expansion.
Check Stock

36" Stainless Steel Flexible Exhaust Tubing 5" Dia Flex Pipe with 2 Band Clamps

  • One pre-cut 36" section of stainless steel flexible exhaust tubing with 2 5" stainless steel exhaust band clamps This exhaust pipe is 5" in diameter and can be used to connect automotive exhaust pipes that are not lined up together.
  • The flexible nature of this type of exhaust tube allows for easily installation.
  • Flexible tubing is primarily used to help reduce and prevent excessive stress on your current exhaust system.
  • It does this by absorbing vibration and thermal expansion.
Check Stock

18" Stainless Steel Flexible Exhaust Tubing 5" Dia Flex Pipe with 2 Band Clamps

  • One pre-cut 18" section of stainless steel flexible exhaust tubing with 2 5" stainless steel exhaust band clamps This exhaust pipe is 5" in diameter and can be used to connect automotive exhaust pipes that are not lined up together.
  • The flexible nature of this type of exhaust tube allows for easily installation.
  • Flexible tubing is primarily used to help reduce and prevent excessive stress on your current exhaust system.
  • It does this by absorbing vibration and thermal expansion.
Check Stock

Roadformer 3 Lap Joint Exhaust Band Clamp Preformed Aluminized Steel

  • Roadformer 3" exhaust clamp is to joint 3" OD pipe overlapping into 3" ID pipe. It is fast, easy and accurate installation, also minimize noise and....
  • This stepped exhaust band clamp is made in high quality standard and using 12.9 degree high-strength fasteners to provide truly sealing force.
  • Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust....
  • Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening. The band steel is tested over 100....
  • Roadformer is dedicated in providing real value to our customers and end users. We set industry quality standard.
Check Stock

Roadformer 5" Lap Joint Exhaust Band Clamp Preformed Aluminized Steel (2 Pack)

  • 2 PIECES IN PACK – 5 inch Lap Joint exhaust clamp is made in high quality standard aluminized steel, used for 5 inch OD to ID exhaust system connection.
  • REAL SEALING CAPABILITY – Roadformer 5 inch exhaust band clamp is using 12.9 degree high-strength fastener providing real sealing capability of leakage free.
  • INNOVATION TECHNOLOGY - Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening, new engineering design provides fast, easy and accurate installation..
  • DURALITY & RELIABILITY - Roadformer clamps band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • FULL CLAMPING AREA - Designed 360 degree full clamping area to create overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
Check Stock

ESPEEDER 3.0 Lap Joint Band Clamp Exhaust Clamps Pipe Repair Parts Stainless Steel

  • Universal fitment, Joins 3.0" OD Pipe to 3.0" ID Pipe, made of 304 stainless steel. There are 5 sizes for choose, it can meet your various needs.....
  • The lap joint clamps 3.0" are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat....
  • Conforms to pipe and flex tubing, exhaust pipe connector come with an "I" block provides a full 360 °equal distribution of stretching forces, without....
  • No welding design makes lap joint clamp fast, easy and accurate installation. It is removable and reusable. just need to put one of the nut bar on one....
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 3.0" lap joint band clamp, you can feel free to contact us via....
Check Stock

Remflex 8002 Universal Exhaust Gasket, (Set of 2)

  • Universal 3” Collector Flange, 3 Bolt Holes, 3-3/8" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

EVIL ENERGY 2.75 Inch 2 3/4 Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

  • Joins 2.75" OD pipe to 2.75" OD pipe. Butt joint band 2.75" exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components....
  • Exhaust coupler clamps are serviceable, durability and reusable. Aslo can be used to repair exhaust pipes. Wrap some exhaust heat tape on the exhaust....
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion. No....
  • Material: 304 stainless steel band, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Note: There is a flat face and arc curved....
  • EVIL ENERGY provide stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and....
Check Stock