ReviewsExhaust Flange Manifold

maXpeedingrods Universal Street Performance GT35 GT3582 Turbo for 2.5L-6.0L Engine T3 AR.70 Anti-Surge Compressor Turbo Charger Bearing 600+HP Water + Oil cooled Billet Compressor Wheel

  • 【Applicaiton】: Perfect for all 4/6 cylinder 2.5L-6.0L engine. Boost Horse Power up to 600HP..
  • 【Specifications】: Exhaust (Turbo Manifold) Flange: T3 Flange & Exhaust (Downpipe) Flange: 4 Bolts. Cooling Type: Water + Oil cooled.
  • 【Billet Compressor Wheel】: Forged full-machined billet aluminum compressor wheels with a larger horsepower range and better boost response.
  • 【Upgrade High Quality Material】:1. "100% balancing Test" by TURBOTECHNICS VSR3. 2. Turbine housing ：Silicon-Molybdenum - temperature resistant....
  • 【NOTE THAT】: Please lubricate the turbo bearing fully before installing, TO ADVOID SHAFT PLAY AND DAMAGE IF INSUFFICIENT OIL SUPPLY. Professional....
Check Stock

Remflex 2032 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • 1-1/4 inch width x 1-5/8 inch height Oval Port.
  • Chevy V8 -Small Block 262 - 400, 1-1/4" x 1-5/8" Oval Port, For Raised Weld Bead Headers , 2/Set.
  • additional sealing material is provided around the weld bead to provide a better seal.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Exhaust Manifold Bolt Repair Kit Compatible with GM Trucks & SUV's（1999 & Newer ）With a 4.8, 5.3, 6.0 or 6.2 L

  • No need to remove broken bolts, The exhaust manifold bolt repair kit will repair the exhaust leak without having to remove the cylinder head or drill out and replace the broken end bolts.
  • Install this part is to repair the driver's side front or the passenger side rear corner broken exhaust manifold bolts.
  • Exhaust manifold repair kit compatible with Trucks & SUV's (1999 & Newer) With a 4.8, 5.3, 6.0 or 6.2 L.engine size..
  • Material: Exhaust manifold repair brackets made of carbon steel, exhaust manifold bolt repair brackets will not fail like the bolts do from heat and expansion of the manifold.
  • We value your shopping experience, If you encounter any problems in installing the exhaust manifold stud repair kit, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

T25 T28 4 Bolt Inlet Turbo Exhaust Manifold Gasket+Paper Gasket Stainless Steel

  • Item included: 1 x stainless steel gasket and 1 x paper gasket.
  • Gaskets Material: 1 layer Stainless Steel.
  • Fit for T25 T28 Turbo , Universal T25 T28 Gasket.
Check Stock

MBRP Exhaust S5001409 Muffler Bypass Fits 14-21 Compatible with/Replacement for Sierra 1500 Silverado 1500

  • ...EASE NOTE ON 2013 AND NEWER 4.8L, 5.3L OR 6.2L ENGINES ONLY, this will fit these motor sizes in years 2013 and newer if the oil dipstick tube is located on the passenger side of your vehicle. and it will fit any year 1999 to current models if you have a 6.0L engine in your vehicle because there is only one style of manifold for the 6.0L engine.
  • ▲ - 100% brand new and high quality, It is easy to install and uses high-quality materials that meet or exceed OEM standards. Exhaust manifold repair brackets made of carbon steel, exhaust manifold bolt repair brackets will not fail like the bolts do from heat and expansion of the manifold.
  • ▲ - The Exhaust Manifold Bolt Repair Bracket is to stop exhaust leaks that occur between the exhaust manifold and the cylinder head..
  • ▲ - If you have any questions, please feel free to contact us, we will serve you wholeheartedly. If you're not 100% satisfied with our tools, simply return it for a full refund in 30 days..
Check Stock

2-Bolt 2.5inch 62mm Exhaust Flange Gasket Turbo/Manifold/Header Down/Dump Pipe Flange 5 PCS

  • Brand New Aftermarket Exhaust Flange Gasket, including 5 PCS 120-07610-0005.
  • Multi Layer Stainless Steel to Ensure Long Service Life.
  • Universal Fitment, suitable for Turbo/Manifold/Header Down/Dump Pipe.
Check Stock

DNA Motoring FXP-FESC01 Flex Pipe Connector [For 03-08 Ford Escape 3.0L V6]

  • Made of high quality T-304 stainless steel with flex.
  • TIG welded CNC machine flange for resistance against pressure and corrosion.
  • Slips over factory exhaust pipe to be clamped or welded to repair broken flex section.
  • 2"diameter 2-bolt inlet to 2. 125" factory sized pipe outlet.
Check Stock

FEL-PRO MS 96696 Intake Manifold Gasket Set

  • A leaking valve cover can be dangerous. The smoke and vapor from the oil burning as it hits a hot exhaust manifold can enter the cabin of the boat. So it is important to install a quality valve cover gasket - GOHAWKTEQ.
  • Replaces# Fel-Pro VS50504R-1, includes 2 gasket, 8 grommet and 1 piece exhaust air pipe flange gasket..
  • Application: Silverado 1500 2500 3500, GMC Sierra 1500 2500 3500,,Buick and more vehicles please check the Part Finder or Product Description.
  • Tips for replacing: 1. Using Spray Adhesive to seal the gaseket on the valve cover and not go anywhere. 2. Using RTV Silicone Gasket Maker to hold the high edge of gasket in position and inside the cover edge.3. Don't scar the valve cover surface when carving the debris.A soft brush can be affective in removing debris..
  • Warranty: This fValve Cover Gasket comes with 30 days HASSLE-FREE RETURN & 1 year UNLIMITED REPLACEMENT PROMISE. If the gasket has any problem, just send us a picture, and we will ship a replacement to you!.
Check Stock

Exhaust Manifold Bolt Repair Kit Compatible with 1999 & Newer GM Trucks and SUV's With a 4.8L, 5.3L, 6.0L & 6.2L LS Engines (Driver Front/Passenger Side-Rear)

  • ... 【Special Tips】2013 AND NEWER 4.8L, 5.3L OR 6.2L ENGINES ONLY, this will fit these motor sizes in years 2013 and newer if the oil dipstick tube is located on the passenger side of your vehicle. If you have a 6.0L engine in your vehicle it will fit 100% (1999 and newer) as there is only one manifold style for the 6.0L engine..
  • 【Function and Role 】Install this part is to repair the driver's side front or the passenger side rear corner broken exhaust manifold bolts. Stops exhaust leaks that occur between the exhaust manifold and the cylinder head. Make your driving quieter..
  • 【High-Quality Materials】 Exhaust manifold repair brackets made of High quality carbon steel, up to OEM standard.TIG welding for durablity and long service time.exhaust manifold bolt repair brackets will not fail like the bolts do from heat and expansion of the manifold.
  • 【After-sales service】Confidence originates from quality! We promise to provide one free return/exchange within 30 days. Provide customers with a truly risk-free shopping experience. If you have any problem, feel free to contact us..
Check Stock

TD04 TD05 VF40 VF46 VF39 VF52 EJ20 EJ25 Turbo Gasket Kit For Subaru 2.0L 2.5L

  • Turbocharger Exhaust Manifold Downpipe Gasket for Subaru WRX TD04 TD05 VF Series.
  • All original gaskets materials uesd the best meterial.
  • No instructions included, professional install recommended.
  • Application : TD04 TD05 and VF series turbos with a 3 bolt flange.
Check Stock

POWERGO MOTORSPORT 2811642419 Exhaust Turbo Manifold Ram Horn T3 44mm W/G Schedule 40 304 Stainless Steel for Integra Civic 1.6L 1.8L B16 B18 DOHC VTEC

  • Tubular manifold design with separate tube for each cylinder, for better exhaust flow and more top end power.
  • Equal length runners for balanced exhaust reversion and enhanced turbo performance.
  • Built with 3.0mm thickness (schedule 40) precast 304 stainless steel pipes.
  • designed for high output setups with up to 800whp.
  • Head flange laser-cut from 1/2 in. (13.5mm) thick steel plates and flattened by hydraulic press.
  • all joints TIG welded for great resistance against cracking and wearing.
Check Stock