ReviewsExhaust Flange Stud

Universal Turbo Turbocharger T3 T4 T04E A/R .50 A/R .63 V-band Oil 1.5-2.5L SCB

Application: Perfect for 1.5L-2.5L engines.
Boost pressures are 7psi(.5 Bar) to 21psi(1.5 Bar).
Exhaust (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns, Exhaust (Downpipe) Flange: Standard T3 5 bolt downpipe flange pattern.
Specification: [Compressor: Trim: 55/A/R: .5.
Professional installation is highly recommended (No Instruction Included).

1.THE SAME MATTE BLACK AS THE EXHAUST IS. Matte Black Color exhaust flanges kit for Harley Models..
2. FROM NOW ON, NO RUST ISSUE. Make of stainless Steel, rust proof, no mess, more durable..
3. QUALITY. Quality compares to OEM flange kit. (OEM 65325-83). (OEM 65328-83)..
4. SAME SIZE AS OEM. Specific dimension are all detailed..
5. FITS WELL. Handmade Exhausts Flange Kit, quality Harley exhaust flange gasket kit for almost 1984-2021 Harley bikes except V-ROD..

OIL RETURN LINE: Length: 550mm || Inner Diameter: 21mm* OIL FEED LINE: Length: 1000mm || Inner Diameter: 14mm.
Perfect for all 4 or 6 CYL, 1.5L-2.5L engines.
Horse Power: Capable of Boosting Horse Power up to 420HP.
Exhaust (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns & Exhaust (Downpipe) Flange: V-Band Flange.

1-3/4 inch pipe, header tube connector flange, 4-into-2/2-into-1.
Bolt hole spacing: (A) 4-5/8 inch x (B) 3-1/4 inch.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten the flange bolts.
Remflex exhaust gaskets come in a standard 1/8 Inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 Inch.

【Application】：Universal for Turbo Manifold with T25 Flange(T28 Flange can be converted to T25 Flange, Adrapter is needed). Perfect for all 1.5L-2.0L engine.
【Specification Size】Exhaust (Turbo Manifold) Flange: T25 4-Bolt Flange / Exhaust (Downpipe) Flange: 5-Bolt Flange.
【Horse Power】: Boost Horse Power up to 350BHP.
【Cooling Type】: Water and Oil Cooled. Oil Restrictor: Yes . [Oil Thread Size: M12*1.25 & Water Thread Size: M8*1.25].
【Important Notice】:1. This Turbo is not vehicle specific. It is compatible with a wide range of applications therefore please check the specifications and verify compatibility prior to placing your order. 2. Some modification may be required, professional installation is highly recommended (No Instruction Included).

1-1/8 inch width x 1-1/2" height Stock Square Port.
Ford V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8" x 1-1/2" Square Port, Manifold or Headers, 2/Set.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
Remflex exhaust gaskets fill those gaps permanently.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.

Chevy V8 - 4.8L, 5.3L, 6.0L LS2 ('99-'08), 5.7L, LS1 LS6 ('97-'08), includes Vortec, Manifold or Headers, 2/Set.
Port configuration comparable to Fel-Pro 1440.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.

Heavy duty threaded exhaust flange kit for use on Honda GX390 engines. This is an un welded DIY kit so you can choose the length of the threaded pipe to work best for your application. Great for custom exhaust setups on generators, go karts, mini bikes, or garden equipment. Flange is CNC cut from heavy 1/4" steel plate to prevent warping, outlet pipe is 1" NPT pipe thread that matches exhaust port perfectly for maximum flow. Length of outlet pipe piece is 2.5"..
Comes complete with stainless steel mounting hardware for a quality installation..

This tool is designed to drill out damaged exhaust studs. Can be used with most engines still in the framework..
Exhaust Stud Drill Plate Installtion Hole Diameter: 8.3mm / 0.33", 8.8mm / 0.35".
Exhaust Stud Drill Plate Total Size: 83x65x22.5mm / 3.27"x2.56"x0.89"(L*W*H).
Fitment:for Harley-Davidson Sportster 883 1986-2006,for Harley-Davidson Sportster 883 2011-2017,for Harley-Davidson Dyna 1992-2017,for Harley-Davidson Iron 883 2009-2017,for Harley-Davidson Electra Glide 1984-2015,for Harley-Davidson Street Glide 2006,for Harley-Davidson Street Glide 2010-2011,for Harley-Davidson Street Glide 2014-2016,for Harley-Davidson Heritage Softail 1986-2006,for Harley-Davidson Fatboy 1990-2011,for Harley-Davidson Low Rider 1985-1992,for Harley-Davidson Tri Glide 2009.
Package Included: 1 x Exhaust Stud Drill Plate, 2 x Drill Bit, 2 x Bolt.
Note: Before purchasing, please check the make, model, and year you need..