ReviewsExhaust Flanges

GlowShift 2-1/4'-2-1/2' Clamp-On Wideband Air/Fuel Ratio Gauge Oxygen Sensor Bung Adapter - No Weld Design

  • GlowShift Clamp-On Wideband Air/Fuel Oxygen Sensor Bung Bracket Adapter Allows Users to Easily Install a Sensor to the Exhaust Pipe with a No Weld Design - DIY Friendly.
  • Adjustable Bracket from 2-1/4" to 2-1/2" - Installs to Vehicle's Exhaust Pipe.
  • 304 Stainless Steel Bracket with (2) Bolts, (2) Nuts, (2) Crush Washers, (2) Flanges, (1) Removable Spacer & Exhaust Gasket to Prevent Leaks.
  • Includes Step-By-Step Installation Instructions.
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

Exhaust Flange, 2inch Universal Flat Oval Split Exhaust Flange Connection Repair Kit Low Carbon Steel Exhaust Downpipe Flange Replacement Accessory

  • Function: This 2-inch flat elliptical exhaust flange provides an effective fixing solution for the exhaust system, removing the intercooler system and turbine parts, such as charging pipes, intake pipes, diesel engines, turbochargers Compressor and heavy-duty exhaust system, etc..
  • Practical Exhaust Flange Repair Kit: The diameter of the center hole of this product is about 2 inches, and the oval bolt hole is about 2 inches. It has the characteristics of fine workmanship, high precision, high sensitivity, practicality and reliability..
  • Great Quality Low Carbon Steel Material: Our exhaust flange is made of high-quality low-carbon steel, which can ensure high hardness, rust resistance, effectively provide services while ensuring long-term use, and has good practicability..
  • High Precision: Our exhaust flanges are produced in strict accordance with the process, and each part is precision processed to achieve precise tolerances to achieve trouble-free performance. Old or damaged adapters can be replaced directly. Please rest assured to buy..
  • Easy Installation: This exhaust flange can be used without welding or cutting the exhaust pipe, just connect it to the flared pipe, and then bolt it to the existing flange you need to connect That's it, the installation st....
Check Stock

Remflex 2032 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • 1-1/4 inch width x 1-5/8 inch height Oval Port.
  • Chevy V8 -Small Block 262 - 400, 1-1/4" x 1-5/8" Oval Port, For Raised Weld Bead Headers , 2/Set.
  • additional sealing material is provided around the weld bead to provide a better seal.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Mophorn Exhaust Header Stainless Steel Long Tube Exhaust Header Polished Manifold Header For Chevy 283 302 305 307 327 350 400 Long Tube Exhaust Header

  • High-quality Stainless Steel: This exhaust manifold has premium quality, made of high-strength polished stainless steel, through an advanced welding....
  • Excellent Performance: Completely welded to against cracking and wearing under high pressure and temperature. Exhaust header collects exhaust gases....
  • Precise Dimension: Tube Diameter: 1 1/2", Collector Size: 3.00". It has a lightweight design. CNC machine flanges with TIG and MIG welded....
  • Easy to Install & Use: Gaskets and other mounting accessories are included in the package, and exhaust pipes can put more power through the wheels to....
  • Direct Fitment: These headers are compatible with 1966-1987 Chevy/GMC SBC 265-350Ci, Pickup Truck/Blazer/Jimmy 2/4WD, capable of adding instant....
Check Stock

Exhaust Flange Kit For Harley Davidson 1984-2020 Touring, Dyna, Softail, Sportster, Evolution Big Twin, Evolution, and Twin Cam Models, Heavy Duty, No Rust by VANJOY (black)

  • 1.THE SAME MATTE BLACK AS THE EXHAUST IS. Matte Black Color exhaust flanges kit for Harley Models..
  • 2. FROM NOW ON, NO RUST ISSUE. Make of stainless Steel, rust proof, no mess, more durable..
  • 3. QUALITY. Quality compares to OEM flange kit. (OEM 65325-83). (OEM 65328-83)..
  • 4. SAME SIZE AS OEM. Specific dimension are all detailed..
  • 5. FITS WELL. Handmade Exhausts Flange Kit, quality Harley exhaust flange gasket kit for almost 1984-2021 Harley bikes except V-ROD..
Check Stock

BBK 1516 1-5/8" Long Tube Full Length High Flow Performance Exhaust Headers for Ford Mustang 5.0L - Chrome Finish

  • BBK is your Number One Aftermarket Performance Exhaust Brand in the USA - American Designed and Built.
  • BBK Exhaust is Built with CNC Mandrel Bent 1-5/8" Tubing for 35% Increased Flow Over Stock to Increase Horsepower, Torque and Performance.
  • Aircraft Quality Construction, Heavy Gauge 1-5/8" Tubing, 3/8" Laser Cut Flanges, Large Bore Patented Designed Collectors and Custom Precision Hand and Robotic Welds for Long Lasting Quality.
  • Long Tube, Full Length Direct "Perfect" Fit Replacement Exhaust Includes All New Gaskets and Hardware (Where Applicable) and Offers Improved Performance and Sound Over Restrictive Stock Systems.
  • Chrome Finish - Designed to Fit All 1979-1993 Ford Mustang 5.0 Applications (5 Speed Only) Requires Matching Short Mid H or X Pipe to Complete InstAllation.
Check Stock

Z Whip SBC Stainless-Steel Exhaust Header Bolt Kit 1” 3/8-16 Bolts Compatible with Chevrolet V8 Small Blocks 265 283 305 327 350 383 400 Gen I & II 92-97 LT1 LT4 TPI TBI 96-98 Vortec 5.0L 5.7L BOP

  • Compatible with all 1955-1998/99 Chevy Small Block Exhaust Headers with up to ½” Thick Flanges 265 283 305 307 327 350 383 400 (These do not fit oem manifolds).
  • Also Compatible with Pontiac Buick Oldsmobile 326 350 389 400 421 455 V8 Engines Using Exhaust Headers with up to ½” Thick Flanges (These do not fit oem manifolds).
  • These are High Grade 18-8 Stainless-Steel Steel 3/8-16×1” Bolts and Washers That will NOT rust or Corrode like the chrome or steel ones sold. These Use a 5/16” Allen Wrench/Socket.
  • We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce..
  • When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you rightfully deserve.
Check Stock

Mophorn Exhaust Header Set 1 5/8 Exhaust Turbo Headers Stainless Steel LS Swap Exhaust Headers Engine Conversion LS Swap Shorty Headers for Chevy LS1 LS2 LS3 LS6 LS7 SUV Camaro Firebird Truck

  • High-quality Stainless Steel: This exhaust header has premium quality, made of high-strength 304 stainless steel with reinforced interlocking braid....
  • Excellent Performance: Completely welded to against cracking and wearing under high pressure and temperature. With mandrel-bent to maintain....
  • Precise Dimension: With CNC Machined Flanges, 2 1/2" collector, 1 5/8" primaries. This exhaust header set is designed to combine, the exhaust gasses....
  • Easy to Install & Use: Integrated hardware, gaskets, bolts, and fittings pipes into a powerful turbo exhaust piping system, the pipe kit shows a....
  • Direct Fitment: It is compatible with for the Chevrolet Camaro Fits Chevy LS1 LS2 LS3 LS6 LS7, adding instant horsepower to the engine, improving....
Check Stock

Hedman 21115 Header Reducer - Set of 2

  • Measures 3" collector to 2.5" exhaust tube size.
  • Comes complete with all necessary hardware for installation.
  • Includes all necessary flanges and gaskets.
Check Stock

Jones Exhaust AHB2

  • 3.00 Inch Header Buddy Collector Kit 3.00 Inlet 2.25 Outlet 3 Bolt Flange Jones.
  • 2 Flanges 2 Collectors and 6 Nuts and Bolts Included.
  • HEADER BUDDY Is An Innovative, New Design For Header/Exhaust Assembly That Requires NO GASKET.
Check Stock

Mophorn Catalytic Converter Direct Fit Front Exhaust Manifold High Flow Catalytic Converter Compatible with Subaru Impreza Legacy Forester Outback 06-12 4 Cyl 2.5L Except Turbo W/Gasket Kit

  • OEM High Flow Design: This catalytic converter is constructed to meet or even exceed OEM quality. Its high flow design can provide more oxygen to your....
  • Stainless Steel Structure: The Subaru exhaust header set with a stainless steel body, can endure high-temper gases from the exhaust. Its internal....
  • Bolt-on Installation: The high flow catalytic converter has standard specification flanges designed for easy installation. Direct bolts exist in the....
  • Standard OBD IV Compliant: To ensure the exhaust emissions meet the Federal Emission Standards, this free-flow catalytic converter is compliant with....
  • Vehicle Compatibility: Our high-quality Subaru converter is compatible with the 2006-2010 Subaru Forester, 2006-2011 Subaru Impreza, 2006-2012 Subaru....
Check Stock