ReviewsExhaust Flared Outlet Tips

Autarboor Exhaust Tip 3 Inch Inlet, 3' Inlet 4' Outlet 12' Long Mirror Polish Stainless Steel Bolt-On Exhaust Tailpipe Tip Slant Cut, Rolled Edge

【Dimension】 Standard with 3 inch Inlet, 4 inch outlet, 12 inch overall length, bolt-on exhaust tips. Universally applicable to vehicles with 3 inch outer diameter of exhaust pipe..
【Special Design】With elaborately mirror polished to keep your vehicle look cool style and new shiny look instead of the rusted old tailpipe. Slant cut design can drain your exhaust tailpipe timely.
【High-grade Material】Made of high quality material stainless steel, strong anti-corrosive, durable exhaust tip, can greatly protect your original pipe from the sun and rain, avoid rusting and deformation.
【Easy installation】Bolt-On exhaust tip don’t require welding or drilling operations, just simply slide the exhaust tip into the exhaust pipe and tighten it with a wrench.
【Warranty】12 months warranty: Feel free to contact our customer service if you have any problem with our product.

Check Stock

3 inch Exhaust Tip, MONOKING Black Exhaust Tip 3 inch Inlet Stainless Steel Clamp On Tailpipes for Truck Car 3″ Inlet 4″ Outlet 12″ Long

EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
CLAMP ON INSTALL – Holds up long time! Well thought out clamping mounting. It takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and clamps down tightly by tightening screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and....

Check Stock

JWWY Stainless Steel Exhaust Muffler Tail Pipe Trim Cover for 2015-2022 Dodge Charger Exterior Accessories

Package: There are two pieces of 2.5 inches inlet exhaust tips in the package..
Specifications: The Apeixoto exhaust tailpipe tip has a standard 2.5’’ x 4’’x 9’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 2.5 inches diameter inlet exhaust pipes..
Material: The Apeixoto exhaust tailpipe tip is constructed with 304 stainless steel. It has a much more shinny and beautiful surface. There is a blue burnt end on the tip. It looks very fashionable and powerful. This types of stainless steel also is rust and corrosion resistant. It will keep your vehicle always in a good look..
Installation: Please be noted that these tailpipes are weld on designed. A professional installation would be recommended. Good installation will make the tailpipe function better..
Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists..

Check Stock

AUTOSAVER88 1.5-2.5 Inch Exhaust Tip, 1.5"-2.5" Inlet 4" Outlet 9" Long Blue Burnt Stainless Exhaust Tip with Clamps and Adapters Fit for 1.5"/1.75"/2.0"/2.25"/2.5" Outer Diameter Tailpipe, Bolt-On

Dimension: Standard 1.5"-2.5" x 4" x 9" (inlet, outlet, and overall length).
Fits for cars with 1.5"/1.75"/2.0"/2.25"/2.5" outside diameter exhaust pipes, no matter what its model is (Please make sure the outside diameter of your car tailpipe is between 1.5-inch and 2.5-inch before purchase).
Anti-deformation & rustproof: built from high-grade stainless steel with blue burnt finished, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
Stylish & pleasant-sounding: sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal.
Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M10 Wrench, no drilling or welding needed.
Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of ....

Check Stock

AUTOSAVER88 4 Inch Inlet Exhaust Tip, 4' Inlet 6' Outlet 15' Long Chrome Polished Finish Stainless Steel Universal Exhaust Tail Tip for 4' Outside Diameter Tailpipe, Rolled Angle Cut, Bolt On, Silver

Dimension: standard 4″ x 6″ x 15″(inlet, outlet and overall length).
ONLY universal fit for vehicles with 4-inch outside diameter exhaust pipes (please make sure the Outside Diameter of your vehicle tailpipe outlet is 4.0″ before purchase).
Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
plus, a drainage hole helps drain water to prevent rust.
Stylish & pleasant-sounding: sleek degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound.
meanwhile, the chrome polished finished offer your car with a a new & sporty appeal.
Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M8 Allen Key, no drilling or welding needed.
Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).

Check Stock

GEATaaT Black Chrome Exhaust Tip Compatible With 2005-2022 Toyota Tacoma Replace# PT932-35180-02

Product Dimensions: 2-1/4In Inlet X 3-3/4In Outlet X 9In Long.
Slanted Tip Shape. 3 Bolt Clamping System, Inlet: 2.25 Inch, Outlet: 3.75 Inch, Length: 9 Inch. Cut Type: Slant Cut.
Resonated Tips Are To Enhance Sound Output.
100 Percent Stainless Steel With Flat Black Finish.
Coated Stainless Steel Resonated Bolt-On Exhaust Tip- Black.

Check Stock

Top10 Racing Red Flame Led Exhaust Muffler Tip Carbon Fiber Racing Automobile Car Tail Pipe Light 2.5 Inch Inlet 4 Inch Outlet - Straight Style

Exhaust Pipe with LED Light: Creative design with LED Light when it's connected with the your car/truck, producing amazing visual effects. A must-have for modified enthusiasts!.
Superior Quality Exhaust Tips: Carbon fiber muffler tip is resonated to enhance sound while protecting the exhaust pipe from sun/rain and avoiding rusting and deformation.
Universal Fit Cars/Trucks: 2.5 inch inside diameter inlet, 4 inch outside diameter outlet, 6.5 inch overall length.
Style: Bolt On - Carbon Fiber Sleeve with Straight Edge Design..
Clamp on design, Easy to install in minutes.

Check Stock

Top10 Racing Red Flame Led Exhaust Muffler Tip Carbon Fiber Racing Automobile Car Tail Pipe Light 2.5 Inch Inlet 4 Inch Outlet - Rolled Style

Exhaust Pipe w/ LED Light: Creative design with LED Light when it's connected with the your car/truck, producing amazing visual effects. A must-have for modified enthusiasts!.
Superior Quality Exhaust Tips: Carbon fiber muffler tip is resonated to enhance sound while protecting the exhaust pipe from sun/rain and avoiding rusting and deformation.
Universal Fit Cars/Trucks: 2.5 inch inside diameter inlet, 4 inch outside diameter outlet, 6.5 inch overall length.
Style: Bolt On - Carbon Fiber Sleeve with Rolled Edge Design..
Clamp on design, Easy to install in minutes.

Check Stock

Top10 Racing Blue Flame Led Exhaust Muffler Tip Carbon Fiber Racing Automobile Car Tail Pipe Light 2.5 Inch Inlet 4 Inch Outlet - Straight Style

Exhaust Pipe with LED Light: Creative design with LED Light when it's connected with the your car/truck, producing amazing visual effects. A must-have for modified enthusiasts!.
Superior Quality Exhaust Tips: Carbon fiber muffler tip is resonated to enhance sound while protecting the exhaust pipe from sun/rain and avoiding rusting and deformation.
Universal Fit Cars/Trucks: 2.5 inch inside diameter inlet, 4 inch outside diameter outlet, 6.5 inch overall length.
Style: Bolt On - Carbon Fiber Sleeve with Straight Edge Design..
Clamp on design, Easy to install in minutes.

Check Stock

AUTOSAVER88 Adjustable 1.5-2.0 Inch Inlet Exhaust Tip, 1.5"-2.0" Inlet 3.5" Outlet 9" Long Black Powdercoat Exhaust Tail Tip with 3-Bolts Adapter Fit 1.5"/1.75"/2.0" Outside Diameter Tailpipe, Bolt On

Dimension: standard 1.5"-2.0" x 3.5" x 9" (inlet, outlet, overall length).
Only universal fit for vehicles with 1.5"/1.75"/2.0"outer diameter exhaust pipes (Please make sure the outlet outer diameter of your vehicle tailpipe is between 1.5-inch and 2.0-inch before purchase).
Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
Stylish & pleasant-sounding: sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the black coated finish would decorate your car with an elegant & mysterious appeal.
Easy installation: 3 Bolts on design makes it super easy to fasten to your exhaust pipe with M10 wrench, no drilling or welding needed.
Daily Maintenance: To make this exhaust tip has a long-life service - Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recom....

Check Stock

Jinsanity Performance Dual Exhaust Tip 2.5 Inch Inlet 3.5'x2 Outlet 10' Length Stainless Polished.(Double rolled, angle,welding) - 1 pair(Left and Right)

Design: Weld On – Rolled Edge – Angle Cut..
Wide Application: Fits 2.25″ Inlet diameter car exhaust tail pipe..
2.25″ Inlet 2-1/4 inch exhaust tail pipe rectangle tips for universal use..
1 Year Warranty: No instruction is included. Professional installation is highly recommended..

Check Stock