ReviewsExhaust Header Collector Kit

Remflex 2032 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

1-1/4 inch width x 1-5/8 inch height Oval Port.
Chevy V8 -Small Block 262 - 400, 1-1/4" x 1-5/8" Oval Port, For Raised Weld Bead Headers , 2/Set.
additional sealing material is provided around the weld bead to provide a better seal.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.

Reduces unwanted and harmful heat under the hood, and from entering the driver compartment.
Improves horsepower performance and can be used on everyday vehicles, motorcycles, street rods, and more.
Wrap sections of exhaust and tail pipe to reduce heat from entering vehicle interior.
wrap motocycle pipes to prevent leg burns.
Kit includes one roll of 2" x 25' exhaust wrap and four 8" stainless steel locking ties to secure wrap.

Made In the USA 3.00 inch X Pipe Universal These Are NOT Mandrel Bent.
Add an “X” pipe Kit to Create Dual Exhaust.
Kit includes Heavy 16 GAGE 3.00 DIA BY 11.00" inch About 55.00 Inches Long Assembled (4) 20.00" Long Pipes + 3.00 inch Header Collectors and Clamps.
Exhaust Cross Over X Pipe (Please measure to make sure this fits your Car or Truck) This is not a direct Replacement it is Aftermarket.

【Fitment】 Exhaust Collector Gaskets are especially designed for SBC BBC 302 350 454，fit for 2.5inch collector with Triangle (3 Bolt Pattern).
【Easy Installation】 Come with two gaskets for easy to install and operate.
【Long-Lasting & long-lasting】 Made with top quality solid copper material for maximum durability, not easy to crack.
【Good Performance】 Reusable, no sealant required, good performance.
【Notice】Please check the detail product description and OEM before placing an order. Any issues, please feel free to ask us..

【Stainless Steel】 The exhaust middle link pipe is made of premium stainless steel construction , high temperature resistant and anti-corrosion, wear resistance, certain hardness, certain impact resistance and durable,superior longevity, good design make the your motorcycle more stable,less shaking, less collision damaged,perfect material can extend the using life of your motor exhaust system..
【Attractive Performance】The motor exhaust front pipe is 100% brand new by professional manufactury ,it has good performance in reducing the exhaust noise and temperature,due to the perfect design, the pipe can make your motorcycle roar with outstanding sound and helps to obtain maximum output, increase the exhaust performance, you can directly replace your old or broken one without worry..
【Special Fitment】The exhaust front pipe is designed for the Kawasaki Z900 2017-2018 ,this exhaust header is designed Fordrivers who need the highest performance of motorcycles, fashion design style, a great accessory to dress up your rides.
【Easy to Install】This front middle pipes kit are easy to install, no modification, cutting or drilling, and are not easy to fall off. It can be easily replaced without soldering. It is the best choice to replace the worn or da....

Dynatech header flanges are of the highest quality for a great start to your exhaust header.
1/4 thick and CNC laser cut for a clean transition from the cylinder head port to the header tube.
This is made of mild steel for a strong long-lasting construction.
A great exhaust system starts at the beginning - the flange and gaskets.
A big Dynatech advantage is the wide selection of port matched flanges.

Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, ('55 - '00), Round Port, Headers, 2/Set.
Port configuration comparable to Fel-Pro 1426.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.

Chevy V8 - 4.8L, 5.3L, 6.0L LS2 ('99-'08), 5.7L, LS1 LS6 ('97-'08), includes Vortec, Manifold or Headers, 2/Set.
Port configuration comparable to Fel-Pro 1440.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.

A BELOVED COLLECTORS ITEM: King Friday is a Mr. Rogers icon. Now you can have this exclusive enamel collector pin to showcase your fandom..
HARD ENAMEL & GLOSS FINISH: Attention to detail is a must for collector’s items. This decorative pin features a detailed King Friday character made of hard enamel and a glossy finish..
SHOWCASE YOUR PIN: This pin measures approximately 1.5-inches in height – the perfect size to display in your collection of other Mr. Rogers collectible items..
OFFICIALLY LICENSED HEADER CARD: Pin will arrive displayed on an officially licensed Mr. Rogers convention header card. Having this impressive showcase piece will greatly enhance your collection!.
LIMITED EDITION: A San Diego Comic-Con 2018 exclusive! Only 1000 pins were produced. Don’t pass up this opportunity to own a classic Mr. Rogers character in the form of a rare collector’s pin!.

Reduce up to 90% Radiant Heat - helps shield fuel lines, brake lines, wire looms and more from radiant heat.
Rated for 1350°F continuous, 2000°F intermittent. Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this exhaust header wrap.
Fiberglass exhaust header wrap can create more horsepower and reduce under hood temperatures.
1/16" x 1" x 50' Roll fiberglass exhaust heat wrap wiht 11-3/4" stainless ties (pack of 5).
Special weave makes it easier to wrap around bends, and gives carbon fiber look..