ReviewsExhaust Header For Bmw

Remflex 2008 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - 4.8L, 5.3L, 6.0L LS2 ('99-'08), 5.7L, LS1 LS6 ('97-'08), includes Vortec, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1440.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

LEDAUT 2\x 50' Twill Weave Motorcycle ATV Titanium Exhaust Heat Shield Wrap with 11.8\ Locking Ties (Pack of 15)

  • Reduce up to 90% Radiant Heat - helps shield fuel lines, brake lines, wire looms and more from radiant heat.
  • Rated for 1350°F continuous, 2000°F intermittent. Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this exhaust header wrap.
  • Fiberglass exhaust header wrap can create more horsepower and reduce under hood temperatures.
  • 1/16" x 1" x 50' Roll fiberglass exhaust heat wrap wiht 11-3/4" stainless ties (pack of 5).
  • Special weave makes it easier to wrap around bends, and gives carbon fiber look..
Check Stock

Remflex 2006 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • 1-3/8 inch width x 1-1/2 inch width Square Port - Matches the Stock cast iron Head Port.
  • Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, Stock Port, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1404.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Check Stock

BTSHUB Exhaust Hanger Removal Pliers Rubber Grommets Removal Tool Muffler Rubber Hanger Pliers

  • Used for separating rubber supports from exhaust hanger brackets (i.e. tailpipe, exhaust piper and muffler) with 25 degree offset handles for work in hard to reach areas..
  • The exhaust pliers works on most import and domestic car and truck exhaust systems that use the rubber hanger supports.
  • Compatible with Mercedes Benz, BMW, Audi, VW, Mini Cooper, Porsche vehicles.
  • Features slip-resistant comfort grips, squeeze to remove a rubber support from an exhaust hanger..
  • Made of high carbon steel material provide maximum strength, durability, and leverage.
  • 8 inch (2.1cm) opening fits around metal hanger brackets and against rubber hanger grommet.
Check Stock

8MILELAKE Exhaust Pipe Hanger Remover Pliers Compatible for VW Porsche BMW Mercedes Mini Cooper Audi

  • The 8MILELAKE exhaust hanger removal pliers is used to remove rubber exhaust system hangers (i.e. tailpipe, exhaust piper and muffler), with 25 degree offset handles for work in hard to reach areas..
  • The exhaust pliers works on most import and domestic car and truck exhaust systems that use the rubber hanger supports, like fit for Mercedes Benz, BMW, Audi, VW, Mini Cooper, Porsche vehicles.
  • Simply squeeze the pliers slip-resistant handles to force the bracket from the rubber support.
  • The exhaust hanger removal plier is made of high carbon steel, which has strong hardness and durability.
  • Comfortable soft vinyl grips with anti-slip function, easy to use and save efforts.
Check Stock

Maxon Auto Corporation 2 Roll 2\ x50' Black Fiberglass Exhaust Heat Wrap Heat Shield Sleeve with Stainless Steel Zip Ties (Pack of 20)

  • Reduce up to 90% Radiant Heat - helps shield fuel lines, brake lines, wire looms and more from radiant heat.
  • Rated for 1350°F continuous, 2000°F intermittent. Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this exhaust header wrap.
  • Fiberglass exhaust header wrap can create more horsepower and reduce under hood temperatures.
  • 1/16" x 1" x 50' Roll fiberglass exhaust heat wrap wiht 11-3/4" stainless ties (pack of 5).
  • Special weave makes it easier to wrap around bends, and gives carbon fiber look..
Check Stock

Yonaka 4-1 Polished Stainless Steel Header Compatible/Replacement for Honda Acura B-Series

  • STAINLESS STEEL CONSTRUCTION - Made of high quality T-304 stainless steel material, which features with strength, rigidity and durability, preventing....
  • SHORTY HEADER DESIGN - 4-1 shorty header design increases high flow air. The bent shape is helpful to the unrestricted flow along the entire flow....
  • HIGH PERFORMANCE - It provides each cylinder with its own mini exhaust pipe, which means exhaust headers prevent interference among cylinders. More....
  • EASY INSTALLATION - Direct bolt-on installation , no more modification needs but hardware such as gaskets and bolts are necessary. 1 X pair of exhaust....
  • FITMENT - Headers may need to be clearanced if using the stock steering shaft, not compatible with factory AC components Compatible with 91-04 GMC....
Check Stock

Tight-Fit Small Block Fits Chevy Block Hugger Headers

  • These small block Chevy tight fit headers work well on early hot rods with narrow frame widths due to the slim 4" distance from the flange to outermost point.
  • 1-5/8" primary tubes and 2-1/2" collectors aid in fitting tight clearance applications.
  • These come painted black for corrosion protection prior to use - we suggest stripping the paint and applying your preferred color of high temperature header paint.
  • Oval exhaust ports fit stock small block Chevy heads - will not clear angle plug heads.
  • Come complete with gaskets, header bolts, and 2" reducers to connect to your exhaust system.
Check Stock

Jones Exhaust AHB2

  • 3.00 Inch Header Buddy Collector Kit 3.00 Inlet 2.25 Outlet 3 Bolt Flange Jones.
  • 2 Flanges 2 Collectors and 6 Nuts and Bolts Included.
  • HEADER BUDDY Is An Innovative, New Design For Header/Exhaust Assembly That Requires NO GASKET.
Check Stock

Mophorn Exhaust Header Set 1 5/8 Exhaust Turbo Headers Stainless Steel LS Swap Exhaust Headers Engine Conversion LS Swap Shorty Headers for Chevy LS1 LS2 LS3 LS6 LS7 SUV Camaro Firebird Truck

  • High-quality Stainless Steel: This exhaust header has premium quality, made of high-strength 304 stainless steel with reinforced interlocking braid....
  • Excellent Performance: Completely welded to against cracking and wearing under high pressure and temperature. With mandrel-bent to maintain....
  • Precise Dimension: With CNC Machined Flanges, 2 1/2" collector, 1 5/8" primaries. This exhaust header set is designed to combine, the exhaust gasses....
  • Easy to Install & Use: Integrated hardware, gaskets, bolts, and fittings pipes into a powerful turbo exhaust piping system, the pipe kit shows a....
  • Direct Fitment: It is compatible with for the Chevrolet Camaro Fits Chevy LS1 LS2 LS3 LS6 LS7, adding instant horsepower to the engine, improving....
Check Stock

Crankcase Ventilation Valve Oil Separator Hose Compatible with BMW E46 E60 E39 X3 X5 320i, 323i, 325, 325i 328i, 330i, 525i, 528i CCV PCV Valve Ventilation Separator 5 Piece Value Kit 11611432559

  • 【PCV CCV Exhaust Hose For BMW Replacement】Since the whole point of positive crankcase ventilation is to keep these gases out of the crankcase, the PCV valve is designed to close off when this happens and block the back flow of gases. If the PCV valve hose is broken, the gas will not be transferred back into the engine, which will reduce your engine efficiency, increase harmful gas emissions and the probability of engine failure..
  • 【Fit The Following Vehicles】This E46 PCV Valve hose kit is a direct replacement for the original vent hoses and PCV valves on a variety of vehicles. This includes most 3 series and 5 series models from 1997-2005. SEE THE FULL LIST ON THE PRODUCT DESCRIPTION PAGE BELOW..
  • 【Replace Part Numbers】This X3 X5 CCV hose kit can replace 11617504536 / 11617501566 / 11611432559 / 11157532649 which are commonly found on popular BMW model including BMW E46 3 series E39 E60 X3 X5..
  • 【OEM Quality & Direct Fit】Manufactured with high temperature plastic materials & advanced technology, meets OEM standard. Even though this is not a genuine BMW PCV crankcase ventilation oil separator hose, but it works even better and lasts longer. Save your time and fund by replacing the PCV crankcase ventilation oil separator hose yourself..
Check Stock