ReviewsExhaust Kits

BRExhaust Stock Replacement Exhaust Kit For Mazda Miata MX-5 MX5 NA 1990 1991 1992 1993 1994 1995 - BRExhaust 106-0246 New

  • Fits, sounds and performs just like OEM - bolts on for an easy DIY installation, with no cutting or welding required. Longer exhaust pipes are replaced by multiple smaller sections, so they can be installed without having to remove axles or suspension..
  • Exhaust kits are manufactured from corrosion-resistant aluminized steel and include all the hardware, clamps and gaskets required for installation.
  • Leaves all emissions equipment intact, making it 50-state emissions compliant.
  • Fits 1990-1995 Mazda MX-5 Miata (chassis code NA).
Check Stock

Exhaust Manifold Bolt Repair Kit Compatible with 4.8 5.3 5.7 6.0 6.2 LS1 LS2 LS3 LS6 Chevy LSX Camaro, Corvette, Trans am, GTO, G8, CTS V, GM Trucks

  • This Exhaust Manifold Bolt Repair Kit was used to repair Driver's Side Rear and Passenger Side Front. We also selling Driver's Side Front and Passenger Side Rear. You can buy it at my store..
  • The Exhaust Manifold Bolt Repair Bracket will Eliminate exhaust noise and repair the exhaust leak without having to remove the cylinder head or drill out and replace the broken end bolts! Save your time and money..
  • Manufactured from high-quality Steel, TIG welding. For durablity and long service time. Kits comes with necessary block, bolts and washers for solid repair..
  • The Exhaust Manifold Bolt Repair Kit Compatible with L20, L31, L33, L59, L76, L77, L83, L86, L8T,L92, L94, L96, L98, L99, L9H, LC9, LFA, LH6, LH8, LM4, LM7, LMG, LQ4, LQ9, LR4,LS1, LS2, LS3, LS4, LS6, LS7, LS9, LSA, LSX376, LSX454, LSX454R, LT1, LT2, LT4,LT5, LY2, LY5, LY6, LZ1.(Fits for GM Vehicles, Silverado, Sierra, Yukon, Denali, Escalade, Hummer ).
  • If any issues from our products arise please don’t hesitate to contact us. We guarantee the quality of our tools and want to ensure you’re only getting the best. B....
Check Stock

COMP Cams CL12-235-2 Xtreme 4x4 210/218 Hydraulic Flat Cam and Lifter Kit for Chevrolet Small Block

  • Strong low end and mid-range torque, good idle..
  • 210/218 Duration at .050". 111 Degree Lobe Separation Angle. 0.447"/0.462" Valve Lift.
  • CL Kits include a camshaft, a set of lifters, instructions and assembly lubricant..
  • Designed for use with common restrictive factory exhaust systems, including OEM exhaust manifolds..
  • Improved throttle response and increased low and mid-range RPM horsepower for towing and off-road..
  • Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer..
Check Stock

Estoder Portable Air Conditioner Window Vent Kit with 5.9" Exhaust Hose (Length Up To 79”), Universal Portable AC Duct Kit with Coupler, Adjustable Window Seal for Sliding Vertical & Horizontal Window

  • [5.9” Exhaust Hose & 79Inch Length]: Our portable ac window kit fits most air conditioners with a diameter of 5.9 inches hose in a counterclockwise thread direction. The air conditioner window kit comes with a vent hose up to 79Inches long (longer than the other 59 inches kits), which is more cost-effective, and gives your mobile air conditioner more room to move..
  • [Adjustable Seal Plates & Good Sealing]: The ac window seal kits has an adjustable length range from 16.93” to 64” that is universal for most horizontal & vertical sliding windows and doors. Includes a sealing brush strip attach to the gap between the window and seal panel for enhanced seal and energy efficiency. Please check if this is the right size for your window before purchasing..
  • [Get A Full Set At Once]: Our AC window vent kit includes 4* Seal Plate (Adjustable length from 16.93" to 64"), 1* Exhaust Hose (79" length, 5.9" diameter), 1* Hose Coupler/Adaptor, 1* Filter, 1* 10ft Sealing Tape and 4* Screws, you can get a full set of accessories at once. All accessories are easy to install or remove, No more extra tools needed. Stored space-saving when not in use..
Check Stock

DNA MOTORING ZTL-25SS-8P 8 Pcs 2.5 Inches Stainless Steel DIY Custom Exhaust Tubing Mandrel Bend Pipe Straight & U-Bend Kit, Universal Fit

  • Easy To Use: Slip Fit Joints to Provide Easiest Fabricatio.
  • Universal Kit: 2pcs 48" Straight Pipes, 2pcs 90 Degree Pipes, 2pcs 45 Degree Pipes, 2pcs 180 Degree U-Bends.
  • Sturdy Structure: Made of High Quality Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
  • DIY Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It.
Check Stock

Broan-NuTone 770RLTK Bathroom Ceiling Exhaust Fan Light with Easy Change Trim Kit, Brushed Nickel, 80 CFM

  • HIGH-QUALITY FAN: Quiet, energy efficient exhaust fan operates with 110 CFM and 1.0 Sones to help control air quality is powerful enough for rooms (including bathroom) up to 105 sq. ft..
  • EFFICIENT: Powerful ventilation removes and reduces the risk of or in most full baths at 110 CFM, so your surroundings will always be comfortable.
  • TRIM KITS: Includes 2 easy change trim kits to match any décor and adaptor plate completely covers drywall cuts.
  • RECOMMENDED INCANDESCENT LIGHTING: 60 Watt maximum, A19 type, E26 bulb or energy efficient equivalent (bulb not included).
  • THREE YEAR LIMITED WARRANTY: Backed by a three year limited warranty for your convenience.
Check Stock

CORSA 14328BLK Cat-Back Exhaust System

  • Dual walled design protects against heat distortion.
  • Adorned with high definition, precision laser engraved CORSA logo.
  • CORSA Performance tip kits are designed to fit directly to CORSA exhaust systems.
Check Stock

CORSA 14317 Axle-Back Exhaust System

  • Dual walled design protects against heat distortion.
  • Adorned with high definition, precision laser engraved CORSA logo.
  • CORSA Performance tip kits are designed to fit directly to CORSA exhaust systems.
Check Stock

CORSA 14459BLK Cat-Back Exhaust System

  • Dual walled design protects against heat distortion.
  • Adorned with high definition, precision laser engraved CORSA logo.
  • CORSA Performance tip kits are designed to fit directly to CORSA exhaust systems.
Check Stock

AP Exhaust 4678 Exhaust Manifold Bolt and Spring Kit

  • Package dimensions :3.302 cm L x10.668 cm W x12.7 cm H.
  • Automotive replacement exhaust bolt and spring kits.
Check Stock

CORSA 14114 Cat-Back Exhaust System with X-Pipe

  • Dual walled design protects against heat distortion.
  • Adorned with high definition, precision laser engraved CORSA logo.
  • CORSA Performance tip kits are designed to fit directly to CORSA exhaust systems.
Check Stock