ReviewsExhaust Manifold Bolts nuts

MAPerformance Investment Cast 310S Stainless Steel Exhaust Manifold Compatible with 2008-2015 Mitsubishi Lancer Evo 10 X

  • Meticulously optimized design yields a 22% average increase in exhaust flow over the OEM exhaust manifold with less imbalance between runners..
  • Investment cast 310s stainless steel construction..
  • Includes (2) allen head bolts to ease installation of the manifold to cylinder head..
  • Application: 2008+ Mitsubishi Lancer Evolution 10 X..
Check Stock

Permatex 77124 Nickel Anti-Seize Lubricant, 8 oz., Pack of 1

  • Protects metal parts from seizing and galling at temperatures up to 2400 degree fahrenheit.
  • For use with stainless steel, titanium and nickel alloys.
  • For use under conditions of extreme pressure and temperature.
  • Recommended where copper contamination must be avoided.
  • Suggested Applications: Exhaust manifold bolts, exhaust system bolts, muffler clamps and tailpipe assemblies.
Check Stock

Remflex 2008 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - 4.8L, 5.3L, 6.0L LS2 ('99-'08), 5.7L, LS1 LS6 ('97-'08), includes Vortec, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1440.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Permatex 09128 Copper Anti-Seize Lubricant, 8 oz.

  • Prevents seizing, corrosion and galling where high temperature conditions exist.
  • Fortified with high quality rust and corrosion inhibitors.
  • Suggested Applications: Spark plug threads installed in aluminum, exhaust manifold bolts, engine bolts, oxygen sensors, knock sensors, thermostat housing bolts, fuel filter fittings and battery cable connections.
Check Stock

5.3L AFM DOD Replacement Kit Lifters Camshaft Head Gaskets for 2005-2014 Buick Chevy Avalanche Silverado Suburban Tahoe Trailblazer Envoy Sierra Yukon V8

  • 5.3 overhaul kit include: multiple layers steel (MLS) head gasket, valve cover gasket, valve stem seals, intake manifold gasket, exhaust manifold gasket, front camshaft seal, o-rings, other small gaskets, 30 cylinder head bolts (20 long bolts: 100mm, 10 small bolts: 45mm), 8 AFM (active fuel management) hydraulic roller lifters, 8 NON-AFM hydraulic roller lifters, 4 AFM lifter tray w/ bolts, replacement dod camshaft (single bolt).
  • AFM kit fit for 2005-2007 Buick Rainier 5.3l V8, for 2005-2006 Isuzu Ascender 5.3l V8, for 2005-2009 Saab 9-7x 5.3l V8.
  • 5.3 head gasket kit for 2007-2013 Chevrolet Avalanche 5.3l V8, for 2007-2009 Chevrolet Avalanche 5.3l V8, for 2007 Chevrolet Silverado 1500 Classic 5.3l V8, for 2005-2013 Chevrolet Silverado 1500 5.3l V8, for 2007-2014 Chevrolet Suburban 1500 5.3l V8, for 2007-2014 Chevrolet Tahoe 5.3l V8, for 2005-2008 Chevrolet Trailblazer 5.3l V8.
  • AFM lifter and camshaft for 2005-2006 GMC Envoy Xl 5.3l V8, for 2005 GMC Envoy Xuv 5.3l V8, for 2005-2009 GMC Envoy 5.3l V8, for 2007 GMC Sierra 1500 Classic 5.3l V8, for 2005-2013 GMC Sierra 1500 5.3l V8, for 2010-2013 GMC Sierra 5.3l V8, for 2007-2....
Check Stock

GY6 ATV 50cc 80cc 90cc 125cc 150cc 200cc Scooter Exhaust Pipe Bolt, nut Gasket + Exhaust Pipe Gasket + Gloves

  • Applicable to GY6 ATV 50cc 70cc 80cc 90cc 125cc 150cc 200cc scooters, go karts, four-wheel pit cars and mopeds..
  • Product size: exhaust pipe nut 32mm / 1.26in long, thread M6 is 5.8mm/0.22in. Nut / cover: 32 mm long / 1.26 inch, 5.1 mm / 0.2 inch thread M6..
  • Thickened gasket, bolt spacing 49mm, inner hole 27mm, double-sided, double-layer thickness! The exhaust pipe will no longer make noise!.
  • The kit includes: 4 exhaust pipe nuts, 4 exhaust pipe bolts, 2 exhaust pipe long bolts, 6 exhaust pipe washers, 2 thickened exhaust pipe washers, 4 flat washers, 4 spring washers and gloves..
  • Please compare your parts with the pictures before purchasing..
Check Stock

Universal Air Conditioning HA10458C Manifold And Tube Assembly

  • Air Locker Manifold Kit enables the installation of Air Locker solenoids to an ARB Twin Compressor.
  • Complete manifold kit to suit Air Locker solenoid mounting on the ARB On-Board Twin Air Compressor Kits..
  • This kit includes a manifold body with mounting bracket, BSPP ports, NPT ports, high temperature resistant braided hose, NPT connection nipples and M6 hex head bolts and nylon lock-nuts which secure this kit..
  • This manifold permits you to lock the front and rear air lockers without needing a compressor for each..
Check Stock

BLACKHORSE-RACING 3 Inch 76mm Stainless Steel V Band Bolt Clamp with 2 Male Female Flanges for Turbo Pipes SS V-Band Flange Kit

  • ▲ 3 INCH STAINLESS STEEL EXHAUST CLAMP KIT – Complete V-band kit is ideal for performance exhaust systems, catback exhausts, turbo back exhausts and more..
  • ▲ COMPLETE 3 PIECE KIT – This complete 3inch Vband kit includes 1x 3″ V-Band clamp which is designed to accommodate the 2x stainless steel 3″ Vband flanges.
  • 1 male flange and 1 female flange. This allows for the flanges to properly align during installation to insure a leak free seal..
  • ▲ DESIGNED FOR 3″ EXHAUST PIPES – This kit is specifically designed for 3″ exhaust pipes. The flanges feature a recessed opening which allows for a 3″ exhaust to easily slip inside the flange, providing a perfect overlap seam for welding..
  • ▲ PERFECT FOR TURBO AND HIGH HORSEPOWER VEHICLES – If you’re making a catback exhaust, turbo back exhaust, mid pipe, or up pipe for your car, truck, or other vehicle this V-band kit is ideal for connecting different pipe sections. Conventional exhaust flanges multiple nuts, bolts, washers and a gasket. A V-band kit eliminates all of these and allows for a connection with a single nut..
  • ▲ EASY ON, EASY OFF – A V-band kit allows you to connect or disconnect sections of your exhaust by removing a single nut. Conventionally exhaust flanges involve multiple ....
Check Stock

RYANSTAR RACING Exhaust Manifold Clamp Exhaust Manifold Repair Kit to Cylinder Head Leak Repair Clamp Replaces 11518860 917-107 Fits Front Right or Rear Left On 4.8L 5.3L 6.0L Engine

  • 【Replace Part Number】——Replacement part number:11518860, 917-107.
  • 【SIMPLIFIES REPAIR】This external clamping solution creates seal by attaching directly to cylinder head, without needing to extract original studs.This exhaust manifold to cylinder head repair clamp fixes a leaking exhaust due to broken manifold bolts..
  • 【APPLICABLE MODELS】Compatible with 2002-2006 Cadillac Escalade.
  • 【HIGH QUALITY】The Exhaust Manifold Clamp made of high quality materials.contructed of premium material with precision processing and strict testing ,achieving long lasting durability and reliability..
  • 【QUALITY CLEARANCE】 The products meet the original OEM standards, and the product quality inspection is checked at all levels.If you encounter any problems when you receive the item, please contact me in time and we will serve you wholeheartedly..
Check Stock

PERMATEX - COPPER ANTI-SEIZE LUBRICANT 8 OZ BRUSH TOP - 230-09128

  • A premium quality copper anti-seize and thread lubricant that may be used to prevent seizing, corrosion and galling where high temperature conditions....
  • Typical applications include spark plug threads installed in aluminum, exhaust manifold bolts, engine, bolts, thermostat housing, fuel filter....
Check Stock

EASYBERG 12PCS Turbocharger & Exhaust Manifolds Up-Pipe Bolts Fit for 2001-2016 Duramax Diesel

  • ▲2001 - 2016 Duramax diesel up-pipe bolt set (set of 12 bolts).
  • ▲12 point M10 bolts, grade 12.9 (160,000 psi tensile strength)..
  • ▲These bolts are used to attach the driver and passenger side up-pipes to the exhaust manifold and turbocharger flanges..
  • ▲ The OEM bolts should not be reused when replacing (or disconnecting) up-pipes as they lose their material properties and strength characteristics with age and heat exposure..
  • ▲They are extremely likely to break if reused and extraction is a tedious, time consuming process..
Check Stock