ReviewsExhaust Manifold Bushing Tool

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

JDMSPEED New Stainless Steel Exhaust Manifold & Gasket Kit Replacement For Grand Cherokee Wrangler 4.0L Replacement For Jeeps Select 1991-1999 4.0L Engine Only Replaces 33007072 4883385

  • Pipes Have Been Upgraded To Stainless Steel.
  • Flex Joints & Flange Still Made Of Standard Steel For Natural Thermal Expansion/Contraction.
  • Package Include: 1 x Exhaust Manifold, all necessary gaskets and downpipe hardware.
  • Included heat shield, Includes flex bellows.
  • Replace Part Number: 33007072, 4883385, 674-196, 10105812.
  • Replacement For Jeep Cherokee L6 4.0L 1991-1999.
  • Replacement For Jeep Comanche (MJ) L6 4.0L 1991-1992.
  • Replacement For Jeep Grand Cherokee L6 4.0L....
  • Direct replacement, exact-fit kit replaces the vehicle's factory installed exhaust manifold.
Check Stock

Exhaust Manifold Gasket Spring Rebuild Kit with Clamp for Polaris Ranger RZR 800 2008-2010 Replaces 3610047 7041687 7041804 5811511

  • 【Top quality materials】Made of high temperature resistant graphene material. Strong airtightness, can withstand 800-1000 degrees, more durable than the original..
  • 【Why need to replace】Extreme temperatures, oil and coolant contamination, and constant exhaust blockage can wear out gaskets and cause leaks between the cylinder head and manifold..
  • 【Fitment】Replacement for P-olaris Ranger 700 (Does NOT fit Crew or 6x6) 2009.
  • For P-olaris Ranger 800 Full Size (Including Crew) 2010-2012.
  • 【Replaces part number 】3610047, 5811511, 7041687, 5250091 7041789.
  • 【Package includes】2 exhaust manifold gasket, 3 Exhaust Gasket Seal, 9 Exhaust Spring.
Check Stock

Remflex 2008 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - 4.8L, 5.3L, 6.0L LS2 ('99-'08), 5.7L, LS1 LS6 ('97-'08), includes Vortec, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1440.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Dorman 03107 Front Manifold Stud and Spring Kit - M10-1.5 x 77mm Compatible with Select Chevrolet / GMC / Oldsmobile Models

  • Ideal replacement - the manifold bolt and spring match the fit and function of the original equipment hardware, including bolt diameter, thread pitch and head type.
  • Complete installation - this kit includes hardware required for securely attaching the manifold to the exhaust system.
  • Trustworthy construction - the kit's bolt and spring are made of hardened steel for durable, long-lasting service life.
  • Quality tested - kit components have undergone extensive testing to ensure proper function and long service life.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

APDTY 785033 Exhaust Manifold w/Gasket Select 5.7L Hemi Left/Driver

  • Brand New Exhaust Manifold Kit-Includes Hardware and Gaskets.
  • Allows Replacement of the Original Left Driver Side Exhaust Manifold.
  • Fits 2009-2009 Chrysler Aspen, 2009-2018 Dodge Durango, 2009-2010 Dodge Ram 1500.
  • Replaces 53034137AC, 68045559AA, 68045559AB, 68045559BA.
  • Match Vehicle to Compatibility Chart to Ensure Exact Fitment on Your Specific Model.
Check Stock

Remflex 2006 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • 1-3/8 inch width x 1-1/2 inch width Square Port - Matches the Stock cast iron Head Port.
  • Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, Stock Port, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1404.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Check Stock

Dorman 03123 Front Manifold Bolt and Spring Kit - 3/8-16 x 1-3/4; M10-1.25 x 67mm Compatible with Select Toyota Models

  • Ideal replacement - the manifold bolt and spring match the fit and function of the original equipment hardware, including bolt diameter, thread pitch and head type.
  • Complete installation - this kit includes hardware required for securely attaching the manifold to the exhaust system.
  • Trustworthy construction - the kit's bolt and spring are made of hardened steel for durable, long-lasting service life.
  • Quality tested - kit components have undergone extensive testing to ensure proper function and long service life.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Exhaust Flapper Water Shutter for Mercruiser 807166A3 Y-Pipe 1982-1996

  • Exhaust Water Flapper for Y-Pipe Exhaust Mercuiser.
  • Replaces Part#: 807166A3 / Sierra 18-2732-9.
  • Fits Mercruiser: V6 / V8 with 4" Y-Pipe & Round Pin Holes 1982-1996.
  • Fits into the Y-Pipe on most V6 & V8 models 1982-1996. Prevents water from backing into the manifold. Not for 4.3L Models with 1 piece manifold.
  • OE quality aftermarket replacement, Exact item pictured.
Check Stock

MAPerformance Investment Cast 310S Stainless Steel Exhaust Manifold Compatible with 2008-2015 Mitsubishi Lancer Evo 10 X

  • Meticulously optimized design yields a 22% average increase in exhaust flow over the OEM exhaust manifold with less imbalance between runners..
  • Investment cast 310s stainless steel construction..
  • Includes (2) allen head bolts to ease installation of the manifold to cylinder head..
  • Application: 2008+ Mitsubishi Lancer Evolution 10 X..
Check Stock