ReviewsExhaust Manifold Crossover Pipe

Exhaust Manifold Bolt Repair Kit Compatible with 1999 & Newer GM Trucks and SUV's With a 4.8L, 5.3L, 6.0L & 6.2L LS Engines (Driver Front/Passenger Side-Rear)

  • ... 【Special Tips】2013 AND NEWER 4.8L, 5.3L OR 6.2L ENGINES ONLY, this will fit these motor sizes in years 2013 and newer if the oil dipstick tube is located on the passenger side of your vehicle. If you have a 6.0L engine in your vehicle it will fit 100% (1999 and newer) as there is only one manifold style for the 6.0L engine..
  • 【Function and Role 】Install this part is to repair the driver's side front or the passenger side rear corner broken exhaust manifold bolts. Stops exhaust leaks that occur between the exhaust manifold and the cylinder head. Make your driving quieter..
  • 【High-Quality Materials】 Exhaust manifold repair brackets made of High quality carbon steel, up to OEM standard.TIG welding for durablity and long service time.exhaust manifold bolt repair brackets will not fail like the bolts do from heat and expansion of the manifold.
  • 【After-sales service】Confidence originates from quality! We promise to provide one free return/exchange within 30 days. Provide customers with a truly risk-free shopping experience. If you have any problem, feel free to contact us..
Check Stock

Remflex 3003 Exhaust Gasket for Ford V8 Engine, (Set of 2)

  • 1-1/8 inch width x 1-1/2" height Stock Square Port.
  • Ford V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8" x 1-1/2" Square Port, Manifold or Headers, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

TOTALFLOW Natural Finish TF-SS2525 409 Stainless Steel 2.5 Inch X-Pipe-2.5' Dual (Inner Diameter)

  • X-crossover pipe stamped X-Pipe - 2. 5" inlet diameter, 2. 5" outlet diameter. Check product details below for other sizes..
  • Pipe have a gentler radius that allows for efficient exhaust gas scavenging, noise Cancellation and better balance between cylinder banks.
  • Designed to channel out the emitted gas from the engine of the vehicle.
  • Weld-on/ clamp-on h-pipes create power gain in low-end and mid-range torque. The H-pipe is recommended for those seeking that Classic deep American muscle sound on their vehicle..
  • 409 Stainless Steel Construction for durability and corrosion resistance.
  • Made from heavy gauge material. TOTALFLOW is a California - USA based company.
Check Stock

KBS Coatings 65328 Pure White Xtreme Temperature Coating - 1 Pint

  • Withstands Continuous Temperature of up to 1500°F.
  • Outstanding Heat & Weathering Resistance.
  • Resists Rust when primed with XTC Primer.
  • Surfaces: header paint muffler paint exhaust manifold paint BBQ grill paint paint for wood stove high heat paint stove wood burning stove paint cast iron stove paint high temperature stove paint pellet stove paint stove pipe paint.
Check Stock

2-Bolt 2.5inch 62mm Exhaust Flange Gasket Turbo/Manifold/Header Down/Dump Pipe Flange 5 PCS

  • Brand New Aftermarket Exhaust Flange Gasket, including 5 PCS 120-07610-0005.
  • Multi Layer Stainless Steel to Ensure Long Service Life.
  • Universal Fitment, suitable for Turbo/Manifold/Header Down/Dump Pipe.
Check Stock

WPHMOTO Lifan 150cc 4 Stroke Oil Cooled Racing Engine Motor Carburetor Wiring Harness Kit for XR50 CRF50 XR CRF 50 70 Dirt Pit Bike Motorcycle

  • Lifan 150cc engine, 1-N-2-3-4 gear, manual clutch, 4 stroke 4 speed, single cylinder.
  • Max. Power & Corresponding Speed: 9kw(7500±375) / Max. Torque & Corresponding Speed: 11N.M(5000±250).
  • Bore x Stroke: 56.5mm x 59mm / Sprocket: 15T 428 Chain / Shaft size: 17mm.
  • Replacement / upgrade for XR50 CRF50, Kawasaki KX KLX and other most popular dirt bikes.
  • Package include: (1)Lifan 150cc Engine (1)Kick Starter Lever (1)Gear Shift Lever (1)Intake Manifold (1)Manifold hardware kit (1)Carburetor (1)Air Filter (1)CDI (1)Ignition coil (1)Wire harness (1)Clutch Cable (1)Exhaust Muffler (1)Pipe.
Check Stock

Cuque Motorcycle Exhaust Mid-Pipe Middle Pipe Full Exhaust System Vent Middle Pipe Stainless Steel Vent Middle Tube for Honda MSX125 2013-2015

  • 【Applicable models】Exhaust Mid Header Pipe,The exhaust central pipe is designed according to the exhaust pipe structure of a specific model. It can perfectly replace AFRICA TWIN CRF1000L ADV 2016 ‑2019 and other series models. The performance is stable. Please confirm the model before buying, so as to bring you a good Use experience..
  • 【Durable material】Exhaust Header Tube,It is made of high-quality stainless steel with a tapered tube with a thickness of 1 mm/0.04 inch. It is heat-resistant, high-temperature resistant, sturdy and not easily deformed, and has strong durability..
  • 【Applicable models】Exhaust Mid Header Pipe,The exhaust central pipe is designed according to the exhaust pipe structure of a specific model. It can perfectly replace AFRICA TWIN CRF1000L ADV 2016 ‑2019 and other series models. The performance is stable. Please confirm the model before buying, so as to bring you a good Use experi....
Check Stock

1 PC SHLPDFM Natural aluminum Intake Manifold Dual Plane Intake Manifold Compatible with 1957-1995 SBC Small Block Chevy 350 400 Idle-5500RPM Manifold

  • ★Compatible with 1957-95 Small Block Chevy 283 327 350 Manifold..
  • ★Dual carb pattern, accepts spread bore such as Quadrajets and includes adapter for use with square bore carbs like Holley.
  • ★Provision for exhaust heated choke and crossover for street applications.
  • For street applications use 600-700 cfm vacuum secondary carbs.For high performance streets, use 700- 800 cfm double pumper carburetors..
  • ★180°dual plane design,Four corner water outlets,Dual distributor hold-down provisions for extra protection against distributor rotation..
Check Stock

WPHMOTO Lifan 140cc 4-Stroke Racing Engine Motor and Muffler Exhaust With Pipe for XR50 CRF50 XR CRF 50 70 ATC70 Dirt Pit Bike Motorcycle

  • High performance Lifan 140cc engine, N-1-2-3-4 Gear, manual clutch, 4 stroke 4 speed, Shaft size: 17mm.
  • Max. Power & Corresponding Speed: 8kw(7500±375) / Max. Torque & Corresponding Speed: 9.5N.M(5000±250).
  • Replacement / upgrade for XR50 CRF50, Kawasaki KX KLX and other most popular dirt bikes.
  • Easy to hook everything up: Just remove your existing engine and reverse the process to put the new one in.
  • Package include: (1)Lifan 140cc Engine (1)Kick Starter Lever (1)Gear Shift Lever (1)Intake Manifold (1)Manifold hardware kit (1)Carburetor (1)Air Filter (1)CDI (1)Ignition coil (1)Wire Harness (1)Exhaust Muffler Pipe(1)Clutch Cable.
Check Stock

Exhaust Pipe Cutter Tool and Exhaust Hanger Removal Pliers for Cutting and Disassembly of Exhaust Piping Systems

  • Exhaust pipe cutter tool features pipe cutter chain w/ cutting wheels, exhaust pipe cutter w/ cushion grips, can be used as PVC cutter or copper pipe cutter. Replacement for exhaust pipe cutter chain, tailpipe cutter, tail pipe cutter, chain tail pipe cutter..
  • The exhaust pipe cutter can cut the exhaust pipe cleanly, reducing burr or burr.
  • Cut off the exhaust pipe on or off the car to facilitate repair or installation of a catalytic converter. Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
  • Exhaust hanger removal plier separates the rubber supports from exhaust hanger brackets, works on all import and domestic car and truck exhaust systems that use the rubber hanger supports..
  • Exhaust hanger removal plier has anti skid handle for easier use. You only need to squeeze the handle of the pliers to remove the rubber bracket from the exhaust pipe hanger, so as to improve your work efficiency..
  • Exhaust pipe cutter tool and exhaust hanger removal plier are the best combination and can easily he....
Check Stock

Exhaust Manifold Repair Driver Rear & Passenger Exhaust Manifold Bolt Repair Kit Compatible with?Newer GM Trucks And SUV 4.8 Liter 5.3 Liter 6.2 L 1999-2013, 6.0 L 1999-2021

  • Compatible With: For GM Trucks & SUV's 1999 & newer models（Include Chevrolet Silverado, GMC Sierra / Yukon / Denali, Escalade, Hummer).
  • Package Include: Driver & Passenger Exhaust Manifold Bolt..
  • Functional: Repair the driver side rear passenger rear broken exhaust manifold bolts, prevent exhaust leaks that take place between the exhaust manifold and the cylinder head.
  • Easy to install: Without removing the cylinder head or drill out and replace the broken end bolts.
  • Warranty: If the received product is deformed or beat up please contact us by message, we will provide warranty service for damaged products, true worry-free shopping experience.
Check Stock