ReviewsExhaust Manifold Heat Shield Insulation

GREHUA Upgrade Exhaust Pipe Muffler Jet Kit with Heat Shield Wrap Roll for Predator 212cc 196cc 6.5hp GX160 GX200 CT200U-ex BT200X CT200U Baja Warrior TrailMaster Massimo MB200 Go Kart Mini Bike Parts

  • FITMENT—fit for go kart engine mini bike parts powered by non hemi predator 212cc 196cc 6.5hp performance parts powerhorse GX160 GX200 Baja Warrior MB200 Colema* CT200U BT200x KT196 CT200U-ex monste* moto engine..
  • HIGH QUALITY MATERIAL—the exhaust pipe is made of high quality metal material for durability and long service life.The improved process with matching strong springs can hold the exhaust muffler perfectly,make the muffler stronger than the old muffler and the exhaust pipe more smoother to use and promote more power..
  • HIGH PERFORMANCE—it's the predator 212cc high performance parts upgrade header exhaust pipe muffler jet kit. It's a simple job to upgrade go kart engine mini bike exhaust pipe muffler,and let the exhaust flow more smoothly to promote more power..
  • EFFICIENT HEAT SHIELD PRETECTION—it made of heat resistant silicone,which can be used for long time and won't melt. The heat shield spacer can withstands 1800°F Direct/2500°F Intermittent Heat prevent burns from the hot exhaust pipes during riding. It is made of high quality materials and it can play a protective role..
Check Stock

PowerStroke Turbo Diesel Exhaust Manifold Bellowed Up Pipes Kit Compatible with Ford 1999-2003 7.3L 679-005 F-250 F-350 Super Duty

  • PowerStroke Turbo Diesel Exhaust Manifold Bellowed Up Pipes Kit  ---Replace the factory exhaust feed system (exhaust manifold to the turbocharger)....
  • Turbocharger Up Pipe Kit Works fit for Ford 7.3L powerstroke turbo V8 diesel models only! Such as: 1999 2000 2001 2002 2003( for Ford )F-250 Super....
  • Function - Direct replacement, Turbocharger Up Pipe Kit replaces the vehicle's factory installed exhaust manifold,Rust-resistant for long-lasting....
  • OE#:  679-005,F4TZ6K854C, F4TZ6K854F, F81Z6K854EA, F81Z6K854FA, F81Z6N632AA, F8TZ6K854AA.
  • include - 1 x Set of Turbo Diesel Exhaust Up Pipe All....
  • IMPORTANT NOTE - This Turbocharger Up Pipe Kit is designed to replace an original Turbocharger Up Pipe Kit with these exact options. If you do not....
Check Stock

Permatex 77134 Nickel Anti-Seize Lubricant, 0.5 oz Tube | Pack of 2

  • Provides a shield against high temperature seizing and galling.
  • Studs, bolts, flanges and other mated partscan be removed easily.
  • Can be used on copper, brass, cast iron, all steel alloys including stainless steel, all plastics and all non-mettalic gasketing materials.
  • Typical applications include spark plug threads installed in aluminum, exhaust manifold bolts, oxygen sensors and battery cable connections.
Check Stock

Exhaust Manifold Repair Driver Rear & Passenger Exhaust Manifold Bolt Repair Kit Compatible with?Newer GM Trucks And SUV 4.8 Liter 5.3 Liter 6.2 L 1999-2013, 6.0 L 1999-2021

  • Compatible With: For GM Trucks & SUV's 1999 & newer models（Include Chevrolet Silverado, GMC Sierra / Yukon / Denali, Escalade, Hummer).
  • Package Include: Driver & Passenger Exhaust Manifold Bolt..
  • Functional: Repair the driver side rear passenger rear broken exhaust manifold bolts, prevent exhaust leaks that take place between the exhaust manifold and the cylinder head.
  • Easy to install: Without removing the cylinder head or drill out and replace the broken end bolts.
  • Warranty: If the received product is deformed or beat up please contact us by message, we will provide warranty service for damaged products, true worry-free shopping experience.
Check Stock

OTC 6982PMC Professional Mechanics Collet Set for Removing Frozen or Correded Studs and Broken Bolts

  • OTC's Professional Mechanics Collet is designed to securely grasp broken studs with as little as 1/4 inch exposed, including corroded or frozen exhaust manifold studs.
  • Compact design lets this versatile tool get into tough to reach spots for extraction -in an around suspension and steering components, tight exhaust manifold clearances and more.
  • Designed to draw tight - within 1/16 inch of head surface to ensure a secure and stable attachment that greatly reduces tipping.
  • Kit includes 4 collets (6mm, 7mm, 8mm, 10mm) sized to fit common applications including exhaust manifold studs, broken head bolts, and other engine and chassis fasteners.
  • Durable blow-molded storage case keeps tools contained and organized so they are ready when you need them.
Check Stock

Design Engineering 010378 Fuel Rail and Injector Cover Kit for Jeep (1997-2004, 4.0L Engine)

  • Designed for 1997-2004 Jeep models with inline 6 motor.
  • Reduces fuel rail and injector heat sink, reduces the chance of vapor lock, and keeps fuel cool.
  • Easy to install kit includes one manifold heat shield, one fuel rail heat cover, size fuel injector covers, and 12 fuel injector O-rings.
  • The heat shield is a glass fiber-backed heat barrier with thick aluminum skin.
  • The fuel rail and injector covers are designed to reflect engine heat.
  • the hook and loop design makes for easy installation.
Check Stock

Universal Starter Heat Shield Barrier Blanket, prevents premature starter failure - Thermal Zero - Fits starters on Chevrolet, Ford, Chrysler, Small Block, Big Block engines and many more.

  • Simple, easy to install heat shield wrap with an extremely effective radiant heat reflective surface.
  • Very thick aluminized insulation helps to eliminate intermittent starter failure due to radiant heat.
  • Aluminized layer reflects over 90% of radiant heat up to 2000F allowing the starter to last longer..
  • Inexpensive, durable solution for starters solenoids that overheat due to exhaust in close proximity.
  • Material can easily be cut to fit most all starters. Proudly manufactured in the USA.
Check Stock

Remflex 8002 Universal Exhaust Gasket, (Set of 2)

  • Universal 3” Collector Flange, 3 Bolt Holes, 3-3/8" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Finish 1 4.1 VOC Gray Enamel Sealer Undercoat (Gallon)

  • Fast-drying, metallic copper sealant that helps dissipate heat.
  • Prevents gasket burnout and improves heat transfer.
  • Resists all types of automotive fluids, especially gasoline.
  • Typical applications include cylinder head gaskets, carburetor gaskets, exhaust manifold gaskets and other high temperature applications.
Check Stock