ReviewsExhaust Manifold Paint

APDTY 785033 Exhaust Manifold w/Gasket Select 5.7L Hemi Left/Driver

Brand New Exhaust Manifold Kit-Includes Hardware and Gaskets.
Allows Replacement of the Original Left Driver Side Exhaust Manifold.
Fits 2009-2009 Chrysler Aspen, 2009-2018 Dodge Durango, 2009-2010 Dodge Ram 1500.
Replaces 53034137AC, 68045559AA, 68045559AB, 68045559BA.
Match Vehicle to Compatibility Chart to Ensure Exact Fitment on Your Specific Model.

Check Stock

Remflex 2006 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

1-3/8 inch width x 1-1/2 inch width Square Port - Matches the Stock cast iron Head Port.
Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, Stock Port, Manifold or Headers, 2/Set.
Port configuration comparable to Fel-Pro 1404.
There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.

Check Stock

Exhaust Flapper Water Shutter for Mercruiser 807166A3 Y-Pipe 1982-1996

Exhaust Water Flapper for Y-Pipe Exhaust Mercuiser.
Replaces Part#: 807166A3 / Sierra 18-2732-9.
Fits Mercruiser: V6 / V8 with 4" Y-Pipe & Round Pin Holes 1982-1996.
Fits into the Y-Pipe on most V6 & V8 models 1982-1996. Prevents water from backing into the manifold. Not for 4.3L Models with 1 piece manifold.
OE quality aftermarket replacement, Exact item pictured.

Check Stock

MAPerformance Investment Cast 310S Stainless Steel Exhaust Manifold Compatible with 2008-2015 Mitsubishi Lancer Evo 10 X

Meticulously optimized design yields a 22% average increase in exhaust flow over the OEM exhaust manifold with less imbalance between runners..
Investment cast 310s stainless steel construction..
Includes (2) allen head bolts to ease installation of the manifold to cylinder head..
Application: 2008+ Mitsubishi Lancer Evolution 10 X..

Check Stock

Exhaust Manifold Bolt Repair Kit Compatible with 4.8 5.3 5.7 6.0 6.2 LS1 LS2 LS3 LS6 Chevy LSX Camaro, Corvette, Trans am, GTO, G8, CTS V, GM Trucks

This Exhaust Manifold Bolt Repair Kit was used to repair Driver's Side Rear and Passenger Side Front. We also selling Driver's Side Front and Passenger Side Rear. You can buy it at my store..
The Exhaust Manifold Bolt Repair Bracket will Eliminate exhaust noise and repair the exhaust leak without having to remove the cylinder head or drill out and replace the broken end bolts! Save your time and money..
Manufactured from high-quality Steel, TIG welding. For durablity and long service time. Kits comes with necessary block, bolts and washers for solid repair..
The Exhaust Manifold Bolt Repair Kit Compatible with L20, L31, L33, L59, L76, L77, L83, L86, L8T,L92, L94, L96, L98, L99, L9H, LC9, LFA, LH6, LH8, LM4, LM7, LMG, LQ4, LQ9, LR4,LS1, LS2, LS3, LS4, LS6, LS7, LS9, LSA, LSX376, LSX454, LSX454R, LT1, LT2, LT4,LT5, LY2, LY5, LY6, LZ1.(Fits for GM Vehicles, Silverado, Sierra, Yukon, Denali, Escalade, Hummer ).
If any issues from our products arise please don’t hesitate to contact us. We guarantee the quality of our tools and want to ensure you’re only getting the best. B....

Check Stock

Eastwood Matte Silver Heat Resistant Paint | High Heat Temperature Protection up to 1400° | Engine Cover or Exhaust Paint | Brake Caliper Paint | Added Corrosion & UV Resistance | 1 Pint 6 sq. ft.

HEAT RESISTANCE UP TO 1400°: Give a high quality OEM matte silver style finish to vital automotive car components such as your exhaust, brake caliper, manifold, headers or engine cover. Extend or renew the lifetime of any surface exposed to high heat temperatures with a durable silver sheen which last for years..
BEST USE: Apply the pint size Eastwood matte silver heat resistant paint with either a spray gun or paint brush. Once applied the high temperature resistance paint will cure with heat. Suitable for adding UV & rust protection to new parts such as stainless steel exhausts, or use to revitalize old tired looking auto components such as an engine cover, or manifold..
EASTWOOD QUALITY: Eastwood offers solutions which combines our 4,000+ unique products with the know-how to “Do The Job Right”. With an In-house product design, development and testing and a strong track record of high-quality, innovative products. Used and trusted by top builders to beginners and also provides a Lifetime Tech Support..
SAFETY INFORMATION: Keep away from heat, sparks & open flame. Use with adequate venting. Vapor is harmful. H....

Check Stock

Dorman 03309 Exhaust Manifold Hardware Kit Compatible with Select Models

Direct replacement - this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on....
Ideal solution - this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed.
Durable construction - this kit is made from quality components to ensure reliable performance and a long service life.
Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

Check Stock

Exhaust Headers,304 Stainless Steel Polished Finish Performance Exhaust Manifold Compatible for 84-91 GMT C/K 5.0/5.7

【Compatible】Fits for Chevy 283/302/305/307/327/350/400. (Please select a suitable model before purchasing)..
【Make Driving Safer】Most of the enclosures and stainless steel pipe connections are equipped with reinforced pull tabs, which greatly alleviate the bumpy force of the exhaust manifold during driving, increase driving safety, and prolong the service life of the exhaust manifold..
【Quality materials】Exhaust Headers made from high-strength steel, heavy duty tubes and collectors.High-quality welding for superior stability..
【Production Process】All joints TIG welded for great resistance against cracking and wearing.
Polished surface for extra resistance against rusting..
【Great Service】All products come with US stock, Fedex or USPS fast shipping.The responsible seller provides you with a 365-day warranty and friendly 24/7 customer service..

Check Stock

RYANSTAR RACING Exhaust Manifold Clamp Exhaust Manifold Repair Kit to Cylinder Head Leak Repair Clamp Replaces 11518860 917-107 Fits Front Right or Rear Left On 4.8L 5.3L 6.0L Engine

【Replace Part Number】——Replacement part number：11518860, 917-107.
【SIMPLIFIES REPAIR】This external clamping solution creates seal by attaching directly to cylinder head, without needing to extract original studs.This exhaust manifold to cylinder head repair clamp fixes a leaking exhaust due to broken manifold bolts..
【APPLICABLE MODELS】Compatible with 2002-2006 Cadillac Escalade.
【HIGH QUALITY】The Exhaust Manifold Clamp made of high quality materials.contructed of premium material with precision processing and strict testing ,achieving long lasting durability and reliability..
【QUALITY CLEARANCE】 The products meet the original OEM standards, and the product quality inspection is checked at all levels.If you encounter any problems when you receive the item, please contact me in time and we will serve you wholeheartedly..

Check Stock

New MLS Head Gasket Set, Head Bolt Kit, Intake & Exhaust Engine Valves Compatible with 99-05 SAAB/SUBARU 2.5L 2458CC H4 SOHC, (16 Valve),”EJ25″

Aftermarket OE Replacement : Meets or exceeds OE standard quality and performance requirements..
COMPATIBLE WITH: 1999-05 Subaru Saab 2.5L 2458CC H4 “SOHC” (16-Valves) Eng.Code “EJ25”.
Includes : MLS (Multi-Layered Steel) Head Gasket (Improved Design) Intake Manifold Gaskets Exhaust Manifold Gaskets Valve Cover Gaskets Spark Plug Tube Seals Grommets Viton Valve Stem Seals Camshaft Front Seals Circular Plug (Valve Cover) EGR Valve Gasket Throttle Body Mounting Gasket Other Small Gaskets, Seals, And O-Rings Head Bolt Set (12 Pcs) RTV Gasket Silicone (Silicone brand may vary depending on availability) Intake & Exhaust Valves (16 Pcs).
Note : Upper Intake Manifold Gaskets (Plenum Gaskets) are “NOT” Included.
CONFIRM THIS PART FITS YOUR VEHICLE BEFORE PURCHASING (Check Fitment Data Above).

Check Stock

Orion Motor Tech Exhaust Manifold Bellowed Up Pipe Kit Compatible with 99-03 Ford 7.3L Powerstroke Turbo V8 Diesel Performance F250 F350 Super Duty Excursion E350| 1999 2000 2001 2002 2003

Bellowed Up Pipes 7.3 ----- Replace the factory exhaust feed system (exhaust manifold to the turbocharger) which is prone to leakage due to the....
Replace Part # ----- 679-005, F81Z-6K854-EA, F81Z-6K854-DA, F81Z6K854EA, F81Z6K854DA on various 1999-2003 | 99 00 01 02 03 Ford 7.3L Powerstroke Turbo....
Fits These Vehicles ----- Works on Ford 7.3L powerstroke turbo V8 diesel models only! Such as: 1999 2000 2001 2002 2003 Ford F-250 Super Duty 7.3L,....
OEM Fit, Quality, Finish ----- This exhaust manifold pipe kit has gone through rigorous test for perfect fit and function that exceeds OEM....
All-in-one Kit ----- Includes everything you need for a fast & effective replacement of bellowed up pipes on the factory exhaust feed system, comes....

Check Stock