ReviewsExhaust Manifold Stud Remover

DEWILL Broken Bolt Remover, Stud Extractor Tool to Locks and Removes 1/4-Inch to 1/2-Inch Rounded Studs, Hexagonal Flat - Suitable for Rust, Painted, Damaged Waste Bolts

  • ...t or stud firmly, continue to rotate the stud counterclockwise until it is removed.Then release and separate them in a clockwise direction..
  • EFFICIENT & VERSATILE - This stud removal tool is easy to operate and can help you get more rest time, whether it is the exhaust manifold, fuel plug, broken bolts, or broken, painted, rusted fastening screws The posts are effectively removed, but the threaded surface may be slightly worn due to the strong clamping force..
  • TRADITIONAL UPGRADE - Traditional bolt extractors are limited in size, and too many types of extractors waste space and cost. It's too much trouble for your mood, so we designed an auto-adjustable extractor that easily clamp the damaged studs for stripping, saving you valuable time，It is definitely a great addition to your toolbox..
  • GUARANTEE SERVICE - Provide 100% satisfactory and reliable customer service within 24 hours. If you have any needs, please contact us immediately, we promise to give you a satisfactory answer..
Check Stock

Remflex 2008 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - 4.8L, 5.3L, 6.0L LS2 ('99-'08), 5.7L, LS1 LS6 ('97-'08), includes Vortec, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1440.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

APDTY 785033 Exhaust Manifold w/Gasket Select 5.7L Hemi Left/Driver

  • Brand New Exhaust Manifold Kit-Includes Hardware and Gaskets.
  • Allows Replacement of the Original Left Driver Side Exhaust Manifold.
  • Fits 2009-2009 Chrysler Aspen, 2009-2018 Dodge Durango, 2009-2010 Dodge Ram 1500.
  • Replaces 53034137AC, 68045559AA, 68045559AB, 68045559BA.
  • Match Vehicle to Compatibility Chart to Ensure Exact Fitment on Your Specific Model.
Check Stock

Remflex 2006 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • 1-3/8 inch width x 1-1/2 inch width Square Port - Matches the Stock cast iron Head Port.
  • Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, Stock Port, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1404.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Check Stock

Exhaust Flapper Water Shutter for Mercruiser 807166A3 Y-Pipe 1982-1996

  • Exhaust Water Flapper for Y-Pipe Exhaust Mercuiser.
  • Replaces Part#: 807166A3 / Sierra 18-2732-9.
  • Fits Mercruiser: V6 / V8 with 4" Y-Pipe & Round Pin Holes 1982-1996.
  • Fits into the Y-Pipe on most V6 & V8 models 1982-1996. Prevents water from backing into the manifold. Not for 4.3L Models with 1 piece manifold.
  • OE quality aftermarket replacement, Exact item pictured.
Check Stock

MAPerformance Investment Cast 310S Stainless Steel Exhaust Manifold Compatible with 2008-2015 Mitsubishi Lancer Evo 10 X

  • Meticulously optimized design yields a 22% average increase in exhaust flow over the OEM exhaust manifold with less imbalance between runners..
  • Investment cast 310s stainless steel construction..
  • Includes (2) allen head bolts to ease installation of the manifold to cylinder head..
  • Application: 2008+ Mitsubishi Lancer Evolution 10 X..
Check Stock

Exhaust Manifold Bolt Repair Kit Compatible with 4.8 5.3 5.7 6.0 6.2 LS1 LS2 LS3 LS6 Chevy LSX Camaro, Corvette, Trans am, GTO, G8, CTS V, GM Trucks

  • This Exhaust Manifold Bolt Repair Kit was used to repair Driver's Side Rear and Passenger Side Front. We also selling Driver's Side Front and Passenger Side Rear. You can buy it at my store..
  • The Exhaust Manifold Bolt Repair Bracket will Eliminate exhaust noise and repair the exhaust leak without having to remove the cylinder head or drill out and replace the broken end bolts! Save your time and money..
  • Manufactured from high-quality Steel, TIG welding. For durablity and long service time. Kits comes with necessary block, bolts and washers for solid repair..
  • The Exhaust Manifold Bolt Repair Kit Compatible with L20, L31, L33, L59, L76, L77, L83, L86, L8T,L92, L94, L96, L98, L99, L9H, LC9, LFA, LH6, LH8, LM4, LM7, LMG, LQ4, LQ9, LR4,LS1, LS2, LS3, LS4, LS6, LS7, LS9, LSA, LSX376, LSX454, LSX454R, LT1, LT2, LT4,LT5, LY2, LY5, LY6, LZ1.(Fits for GM Vehicles, Silverado, Sierra, Yukon, Denali, Escalade, Hummer ).
  • If any issues from our products arise please don’t hesitate to contact us. We guarantee the quality of our tools and want to ensure you’re only getting the best. B....
Check Stock

Dorman 03309 Exhaust Manifold Hardware Kit Compatible with Select Models

  • Direct replacement - this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on....
  • Ideal solution - this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed.
  • Durable construction - this kit is made from quality components to ensure reliable performance and a long service life.
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Exhaust Headers,304 Stainless Steel Polished Finish Performance Exhaust Manifold Compatible for 84-91 GMT C/K 5.0/5.7

  • 【Compatible】Fits for Chevy 283/302/305/307/327/350/400. (Please select a suitable model before purchasing)..
  • 【Make Driving Safer】Most of the enclosures and stainless steel pipe connections are equipped with reinforced pull tabs, which greatly alleviate the bumpy force of the exhaust manifold during driving, increase driving safety, and prolong the service life of the exhaust manifold..
  • 【Quality materials】Exhaust Headers made from high-strength steel, heavy duty tubes and collectors.High-quality welding for superior stability..
  • 【Production Process】All joints TIG welded for great resistance against cracking and wearing.
  • Polished surface for extra resistance against rusting..
  • 【Great Service】All products come with US stock, Fedex or USPS fast shipping.The responsible seller provides you with a 365-day warranty and friendly 24/7 customer service..
Check Stock

RYANSTAR RACING Exhaust Manifold Clamp Exhaust Manifold Repair Kit to Cylinder Head Leak Repair Clamp Replaces 11518860 917-107 Fits Front Right or Rear Left On 4.8L 5.3L 6.0L Engine

  • 【Replace Part Number】——Replacement part number：11518860, 917-107.
  • 【SIMPLIFIES REPAIR】This external clamping solution creates seal by attaching directly to cylinder head, without needing to extract original studs.This exhaust manifold to cylinder head repair clamp fixes a leaking exhaust due to broken manifold bolts..
  • 【APPLICABLE MODELS】Compatible with 2002-2006 Cadillac Escalade.
  • 【HIGH QUALITY】The Exhaust Manifold Clamp made of high quality materials.contructed of premium material with precision processing and strict testing ,achieving long lasting durability and reliability..
  • 【QUALITY CLEARANCE】 The products meet the original OEM standards, and the product quality inspection is checked at all levels.If you encounter any problems when you receive the item, please contact me in time and we will serve you wholeheartedly..
Check Stock

New MLS Head Gasket Set, Head Bolt Kit, Intake & Exhaust Engine Valves Compatible with 99-05 SAAB/SUBARU 2.5L 2458CC H4 SOHC, (16 Valve),”EJ25″

  • Aftermarket OE Replacement : Meets or exceeds OE standard quality and performance requirements..
  • COMPATIBLE WITH: 1999-05 Subaru Saab 2.5L 2458CC H4 “SOHC” (16-Valves) Eng.Code “EJ25”.
  • Includes : MLS (Multi-Layered Steel) Head Gasket (Improved Design) Intake Manifold Gaskets Exhaust Manifold Gaskets Valve Cover Gaskets Spark Plug Tube Seals Grommets Viton Valve Stem Seals Camshaft Front Seals Circular Plug (Valve Cover) EGR Valve Gasket Throttle Body Mounting Gasket Other Small Gaskets, Seals, And O-Rings Head Bolt Set (12 Pcs) RTV Gasket Silicone (Silicone brand may vary depending on availability) Intake & Exhaust Valves (16 Pcs).
  • Note : Upper Intake Manifold Gaskets (Plenum Gaskets) are “NOT” Included.
  • CONFIRM THIS PART FITS YOUR VEHICLE BEFORE PURCHASING (Check Fitment Data Above).
Check Stock