ReviewsExhaust Manifold To Cylinder Head Gasket

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

MAPerformance Investment Cast 310S Stainless Steel Exhaust Manifold Compatible with 2008-2015 Mitsubishi Lancer Evo 10 X

  • Meticulously optimized design yields a 22% average increase in exhaust flow over the OEM exhaust manifold with less imbalance between runners..
  • Investment cast 310s stainless steel construction..
  • Includes (2) allen head bolts to ease installation of the manifold to cylinder head..
  • Application: 2008+ Mitsubishi Lancer Evolution 10 X..
Check Stock

NON AFM DOD Kit with Camshaft Lifter 5.3 Head Gasket Oil Pump Valley Cover for 2005-2014 Chevy Silverado Suburban GMC Sierra 5.3L Engine

  • ...V8, for 2010-2013 Gmc Sierra 5.3L V8, for 2007-2014 Gmc Yukon Xl 1500 5.3L V8, for 2008-2014 Gmc Yukon 5.3L V8, for 2005-2006 Isuzu Ascender 5.3L V8, for 2005-2009 Saab 9-7x 5.3L V8.
  • NO AFM kit include head gasket, valve cover gasket, valve stem seals, exhaust & intake manifold gasket, front camshaft seal, o-rings, other small gaskets, cylinder head bolts, camshaft, oem gm balancer bolt, non afm roller lifters, lifter trays w/ bolts, front cover gasket set, non afm valley pan cover, high pressure oil pump, camshaft retainer plate gasket.
Check Stock

RYANSTAR RACING Exhaust Manifold Clamp Exhaust Manifold Repair Kit to Cylinder Head Leak Repair Clamp Replaces 11518860 917-107 Fits Front Right or Rear Left On 4.8L 5.3L 6.0L Engine

  • 【Replace Part Number】——Replacement part number:11518860, 917-107.
  • 【SIMPLIFIES REPAIR】This external clamping solution creates seal by attaching directly to cylinder head, without needing to extract original studs.This exhaust manifold to cylinder head repair clamp fixes a leaking exhaust due to broken manifold bolts..
  • 【APPLICABLE MODELS】Compatible with 2002-2006 Cadillac Escalade.
  • 【HIGH QUALITY】The Exhaust Manifold Clamp made of high quality materials.contructed of premium material with precision processing and strict testing ,achieving long lasting durability and reliability..
  • 【QUALITY CLEARANCE】 The products meet the original OEM standards, and the product quality inspection is checked at all levels.If you encounter any problems when you receive the item, please contact me in time and we will serve you wholeheartedly..
Check Stock

Vincos Head Gasket Set with Head Bolts HS26236PT-2 Compatible with Civic DX LX 2001-2005 VTEC D17A1 1.7L

  • 【Interchange Part Number】HSHO034, HBHO034【Compatible with】2001 - 2005 CIVIC LX 1.7L 1688cc SOHC L4 (16 Valves), Eng. "D17A1".
  • 2001 -2005 CIVIC DX 1.7L 1688cc SOHC L4 (16 Valves), Eng. "D17A1"【Include】head gasket.
Check Stock

AIB2C 24 041 49-S Exhaust Gasket Replace Kohler Engines CH18 CV25 CV22 CH670 CH680 CV742 CV745 6 pcs

  • Aftermarket Engine Manifold Gasket 24-041-02-S ,Contains 6 pcs.
  • Offering Good Durability & Reliability,Solve Your Exhaust Leak Problems.
  • It forms a seal between the cylinder head and the muffler.
  • Attentions:Let the engine cool and disconnect the spark plug wire before installing this part. Wear work gloves to protect your hands.
Check Stock

Gen III LS Head Gasket Kit for GM Chevy LS1 LS6 LQ4 LQ9/4.8L 5.3L 5.7L 6.0L 1997-2007 Cylinder Engine Block Valley Cover Gasket 12589226 12612350 12558178

  • ...)Front Main Crank Seal#12585673/(2)Knock Sensor Grommet# 12558177/(4)Water Block Off Gaskets#12551933/(2)LS Water Pump Gasket #12630223/(1)Front Cover Gasket#12633904/(1)Rear Main Seal Gasket#12639249/(1)Oil Pan Gasket#12612350/(2)Cylinder Head Gasket#12589226/(1)Engine Block Valley Cover Gasket#12558178/(1)Exhaust Manifold Gasket#12617944/(1)Valve Cover Gasket#12637683.
Check Stock

A-Premium Left Exhaust Manifold Kit with Gasket Compatible with Nissan Frontier 2005-2019 Pathfinder 2005-2012 NV1500 NV2500 NV3500 2012-2021 Xterra 4.0L

  • 【Vehicle Fitment】This Exhaust Manifold Kit is Compatible with Nissan Frontier 2005-2019, NV1500/NV2500/NV3500 2012-2021, Pathfinder 2005-2012, Xterra 2005-2015---V6 4.0L.
  • 【Durable Construction】This exhaust manifold set is made of solid metal which can resist heat, cold, warping and corrosion, and restore engine proper operation.
  • 【Reference Number】The A-Premium Exhaust Manifold Kit's reference number: 674-947, 674947, 14002EA210, 14002EA21A. Before placing an order, verify that the part is compatible with your vehicle using the compatibility system..
  • 【Customer Support】1 Year Unlimited-mileage Quality Guarantee.
  • With being sturdy and brand-new, this exhaust long tube headers is the ideal replacement. Please get in touch with us at any time if the product has any quality issues, such as damage or isn't appropriate for your automobile..
Check Stock

Exhaust Manifold Bolt Repair Kit Compatible with 1999 & Newer GM Trucks and SUV's With a 4.8L, 5.3L, 6.0L & 6.2L LS Engines (Driver Front/Passenger Side-Rear)

  • ... 【Special Tips】2013 AND NEWER 4.8L, 5.3L OR 6.2L ENGINES ONLY, this will fit these motor sizes in years 2013 and newer if the oil dipstick tube is located on the passenger side of your vehicle. If you have a 6.0L engine in your vehicle it will fit 100% (1999 and newer) as there is only one manifold style for the 6.0L engine..
  • 【Function and Role 】Install this part is to repair the driver's side front or the passenger side rear corner broken exhaust manifold bolts. Stops exhaust leaks that occur between the exhaust manifold and the cylinder head. Make your driving quieter..
  • 【High-Quality Materials】 Exhaust manifold repair brackets made of High quality carbon steel, up to OEM standard.TIG welding for durablity and long service time.exhaust manifold bolt repair brackets will not fail like the bolts do from heat and expansion of the manifold.
  • 【After-sales service】Confidence originates from quality! We promise to provide one free return/exchange within 30 days. Provide customers with a truly risk-free shopping experience. If you have any problem, feel free to contact us..
Check Stock

Ambienceo 26” 28” Black 2 Stroke 50cc 80cc Cycle Bicycle Gas Motorized Gasoline Engine Motor Kit CDI Air Cooling For Mountain and Road Bike 80cc Silver

  • CDHPOWER LD90 Cylinder Body w/Piston Kit.
  • Compatible with bottom end of all brand 2 stroke gas motor kit 66cc/80cc/pk80/LD80/LD90 including other....
  • New pk80 upgraded cylinder with piston kit, the piston kit is installed well inside of cylinder already.Excluding cylinder head..
  • Cylinder head gasket and cylinder body gasket are included.
  • The LD90 Cylinder Body and piston kit can be replacement of most 2-stroke gas motor engine such as pk80/LD80/LD90.
  • piston pin:10mmx39mm.This is a high hole piston for a 40mm stroke but with 48mm bore..
Check Stock