ReviewsExhaust Manifolds

Permatex 80335-12PK Muffler and Tailpipe Sealer 3 oz Pack of 12 Black

  • Most advanced, high temp RTV silicone gasket available.
  • Three times more oil resistant than conventional silicones.
  • eight times more flexible than cut gaskets.
  • Sensor-safe, low odor, and non-corrosive with superior adhesion.
  • Temperature range -75F to 700F intermittent.
  • Suggested Applications: Exhaust manifolds/headers, valve covers, oil pans, timing covers, water pumps, thermostat housings.
Check Stock

GLM Cast Iron Exhaust Manifold for Mercruiser 4.3 V6 Engines 1983-2002 Replaces Part Numbers 99745 99746 99746A8 99746A17

  • Cast Iron Exhaust Manifold for Mercruiser 4.3 V6 engines from 1983 to 2002. Replaces MerCruiser part numbers 99745, 99746, 99746A8, 99746A17.
  • Includes gaskets, plugs, drain elbow, and blue drain plug. Left and right are the same. Does not fit newer dry-joint manifolds (2002 and newer).
  • 100% Leak Tested. Uniform wall thickness. Clean exhaust passages. Shot peened for smooth external finish. All mounting surfaces CNC machined to....
  • GLM Marine, has catapulted to the forefront in manifold technology by incorporating improvements in design, manufacturing, quality assurance, fault....
  • For over 32 years now, GLM has committed itself to producing high quality and cost effective aftermarket marine products. From superior quality....
Check Stock

J-B Weld ExhaustWeld 2\ x 72\ Repair Wrap

  • J-B WELD EXHAUSTWELD: A high strength fiberglass wrap, impregnated with a specially formulated resin for high temperature resistant repairs. ExhaustWeld can resist up to 1100°F once it is fully cured!.
  • CURE AND SET TIME: ExhaustWeld can cure with or without heat! It will cure within 20 minutes if heat is applied to it with either a heat gun or by letting the engine run. Without heat, ExhaustWeld will set in 20 minutes and cure in 2 hours..
  • HIGH HEAT RESISTANCE: Once fully cured, J-B Weld ExhaustWeld Exhaust System Repair Wrap has a temperature resistance of 1100°F, allowing it to be used on every part of the exhaust system!.
  • APPLICATIONS: Manifolds, Catalytic Converters, Mufflers, Tailpipes and more!.
  • EVERYTHING YOU NEED: The kit includes a pair of gloves and a .5" x 24" piece of aluminum tape!.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

Dorman 674-939 Exhaust Manifold for Select Pontiac / Toyota Models

  • Ideal replacement - this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles.
  • Reliable construction - durable materials resist warping, cracking and leaking for long-lasting performance.
  • Complete repair - includes all necessary gaskets and downpipe hardware.
  • Trustworthy design - built by industry leader in aftermarket manifolds.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Vortec LS Single T4 Turbo Kit Complete Silverado Sierra Turbocharger V8 LS 4.8 5.3 6.0 62

  • OEM quality cast exhaust manifolds and downpipes.
  • Mandrel bent TIG welded aluminum intake piping.
  • Bar and plate front mount intercooler with brackets.
  • Complete braided SS -AN oil lines w/feed adapter All vacuum lines, pcv system, check valves, clamps, etc etc etc included.
Check Stock

Dorman 674-922 Driver Side Exhaust Manifold Compatible with Select Models

  • Ideal replacement - this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on....
  • Reliable construction - durable materials resist warping, cracking and leaking for long-lasting performance.
  • Complete repair - includes all necessary gaskets and downpipe hardware.
  • Trustworthy design - built by industry leader in aftermarket manifolds.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

GHmarine 807166A2 Exhaust Water Shutter Kit for Mercruiser Stern Drive 4.3L V6 Engines

  • Exhaust Flapper/Shutter for Mercruiser Part #: 807166A2.
  • Fit for Mercruiser V6 4.3L One Piece Manifolds Only.
  • Package contains 1Flapper and 2 Grommets.
  • Made of Premium Stainless Steel and CR Rubber, High Hardness and Durable, Best Price OEM quality, Ideal Shutter for your selection.
Check Stock

Hi-Tech Duravent Dura-Thane Heavy-Duty Series Urethane Duct Hose, Clear, 8\ ID, 8-1/2\ OD, 25' Length

  • Item Package Dimension:27.686 cm L X9.652 cm W X9.652 cm H.
  • Automotive Replacement Exhaust Manifolds.
Check Stock

Dorman 674-599 Driver Side Exhaust Manifold Compatible with Select Nissan Models

  • Ideal replacement - this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles.
  • Reliable construction - durable materials resist warping, cracking and leaking for long-lasting performance.
  • Complete repair - includes all necessary gaskets and downpipe hardware.
  • Trustworthy design - built by industry leader in aftermarket manifolds.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 674-923 Passenger Side Exhaust Manifold for Select Chrysler / Dodge / Ram Models

  • Ideal replacement - this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on....
  • Reliable construction - durable materials resist warping, cracking and leaking for long-lasting performance.
  • Complete repair - includes all necessary gaskets and downpipe hardware.
  • Trustworthy design - built by industry leader in aftermarket manifolds.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Permatex - 80333 - Muffler & Tailpipe Putty 4 oz net wt 2 foil pouches

  • Jb Weld Extreme Heat: Is Formulated For Repairs To Iron, Steel And Metal In High Temperature Environments 1000°F / 537°C. Non-Flammable, It Contains....
  • The Original Cold Weld: Jb Weld Was Developed As An Alternative To Torch Welding. Designed To Be Effective In Extreme Environments, Once It Sets, It....
  • Simple To Use: When Fully Cured, This Metallic Compound Can Be Drilled, Machined Or Sanded. It Is Great For Repairing Cracks, Small Gaps, Seam....
  • Versatile & Dependable: Ideal For Repair Work On : Exhaust Manifolds, Pipe Connections, Mufflers, Catalytic Converters, Outdoor Grills, Fire Boxes,....
Check Stock