ReviewsExhaust Nut And Studs

FASHEWELRY 16Pcs Wood Stud Earring Posts with Loop Teardrop Rhombus Oval Flat Round Wood Stud Earring with Ear Nuts for DIY Wooden Earrings Making (CoconutBrown)

  • PACKAGE INCLUDE: 4pcs x 4 shape wood stud earring findings, they are teardrop, rhombus, oval, flat round shape.
  • MEASUREMENT: wood stud earring finding: 15.5~16.5x10.5~16.5x2.5mm, hole: 1.5mm, pin: 0.6mm.
  • ear nut: 4x4mm, hole: 0.5mm. (For detailed dimensions, please browse the product description below.).
  • MATERIAL: made of good quality wood with coconutbrown color, well polished, smooth surface, lightweight and comfortable to wear..
  • EASY TO USE: the loop allows you to match with jump rings to hang beaded dangles. You can easily make simple but elegant drop earrings..
  • GREAT FOR DIY: various shapes wood earring studs for you to choose, also allow you to DIY your earring finding with some small Jewelry accessories, earring studs come with earring backs, it can match ear studs well, convenient for you earring making..
Check Stock

Mostbest Head Stud Replacement Kit for SBC Cylinder Head Stud Set # 1525-Stud/ 279.1001

  • ❤️This kit has 14 long studs, 4 medium length, and 16 short studs..
  • ❤️ This listing is for the sbc head stud kit. We have used this kit on all of our sbc engine buildups, and the fitment is perfect. You will receive every stud needed to install both cylinder heads on your engine..
  • ❤️These head studs are made from aircraft quality 8740 high tensile strength chrome moly steel. They are twice as strong (190,000 psi steel alloy) as the stock head bolts. Kit that comes complete with 12 point hex nuts and washers. Very similar or rather identical in design and function to the ARP kits..
  • ❤️Studs make head installation a lot easier as the studs align the head and hold the head gasket in place.
  • ❤️ They clamp much better since the stud is loosely threaded into the block and the clamping torque is generated at the stud-nut interface rather than the block-bolt interface.
Check Stock

2X 2.0' Inch Stainless Steel Butt Joint Exhaust Band Clamp Sleeve for Exhaust Pipes, Mufflers and Catalytic Converters

  • HIGH QUALITY : The band is made of non-magnetic stainless steel for long durability and reliability, zinc-plated M10 flange bolt and nut, steel gasket, aluminum alloy I-block..
  • ADVANTAGE : It is very easy to solve the problem of replacing a section of the exhaust exhaust tubing without loosening multiple sections of exhaust tubing to install the flared connection, and it will make the connection very firm and very tight..
  • FUNCTION : Great solution for connecting 2 pipes of the same diameter! 360-degree clamping of the exhaust tubing to prevent exhaust leakage and noise.
  • INSTALL EASILY : You only need to link two tubing of the same size, then tie the strap clamp to it, and finally tighten the two screws..
  • WHAT YOU WILL GET : Two 2in Exhaust Bands, 12-month warranty, whatever the problem about this item you have, please contact us..
Check Stock

Flanged Hex Head Bolts, Flange Bolts, Exhaust Manifold Bolt Kit M10X1.5-35mm 6-Pack

  • Aftermarket 03423 Exhaust Manifold Hardware Kit.
  • Stainless Steel construction provides strength and offers good.
  • The bolt kits are ideal for securing exhaust components and eliminating exhaust leaks.
  • Fits some Toyota,BWM,Lexus,Chevrolet models.Please check the size before purchasing.
Check Stock

Tnuocke 2.0" Butt Joint Band Exhaust Seal Clamp Sleeve,50mm Stainless Steel Exhaust Sleeve Band for Exhaust Pipe, Muffler,Manifolds,Coupler H-031-50

  • Premiun Materials:The exhaust clamp is made from high quality stainless steel, stainless steel material, not easy to rust, corrosion-resistant,Precision-machined, shiny surface with no burr.
  • Prefect design:Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion.
  • Easy install:Put one of the nutbars on one side and insert the bolts, put another nut bar on, then screw the nuts, and connect.
  • Wide use:They are fit perfectly for exhaust tips, mufflers, cat back systems, racing exhaust.
  • Package:You will get 1 stainless steel Exhaust Band Clamp,The exhaust band clamp is reusable without damaging the pipes.
Check Stock

BLACKHORSE-RACING 4 Inch V Band Clamp with Stainless Steel Flange 4 Inch V Band Bolt Clamp with 2 Male Female Flanges for Turbo Pipe Performance Exhaust Sysformance Exhaust Pipes

  • √ 4 INCH STAINLESS STEEL EXHAUST CLAMP KIT - Complete V-band kit is ideal for performance exhaust systems, downpipes, catback exhausts, turbo back....
  • √ COMPLETE 4 PIECE KIT - This complete 4inch Vband kit includes 1x 4" V-Band clamp which is designed to accommodate the 2x stainless steel 4" Vband....
  • √ DESIGNED FOR 4" EXHAUST PIPES - This kit is specifically designed for 4" exhaust pipes. The flanges feature a recessed opening which allows for a....
  • √ PERFECT FOR TURBO AND HIGH HORSEPOWER VEHICLES - If you're making a downpipe, catback exhaust, turbo back exhaust, mid pipe, or up pipe for your....
  • √ EASY ON, EASY OFF - A V-band kit allows you to connect or disconnect sections of your exhaust by removing a single nut. Conventionally exhaust....
Check Stock

EVIL ENERGY 3 Lap Joint Exhaust Band Clamp Preformed 304 Stainless Steel

  • Joins 3.0 inch OD Pipe to 3.0 inch ID Pipe. Lap joint exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as....
  • Connection Type: ID-OD slip fit connection, preferably with compression slit. This lap joint clamp commonly to join different size pipe..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion..
  • Material: 304 stainless steel strap, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Lap Joint band clamp requires that the....
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and....
Check Stock

Fastronix 5/16' - 1/4' Stud Terminal Cover 2 Pack (Red)

  • Use with 5/16" or Smaller Studs to Fit over Nut.
  • Improve the Appearance of Your Power and Grounding Studs.
  • Use with Fastronix 406-251 Junction Blocks.
Check Stock

Amazon Brand - Denali 7-Piece Hollow Shaft Nut Driver Set with Cushion Grip Handles

  • 7-piece nut driver set for tightening nuts and bolts.
  • Includes 7 nut drivers with chrome-plated 3-inch shafts.
  • Precision machined tips ensure an exact fit.
  • Hex Nut Sizes: 3/16, 1/4, 5/16, 11/32, 3/8, 7/16, 1/2.
  • Cushion grip handles promote a secure, comfortable hold and optimal torque.
  • The product is covered by the Hand Tool Limited Lifetime Warranty.
Check Stock

Glixal ATMT1-014 GY6 125cc Chinese Scooter ATV Moped Engine 52.4mm Cylinder kit with Piston Kit for 4T 152QMI JONWAY ZNEN Roketa JCL Taotao Dongfang

  • 1.This Cylinder fits the 76mm Bolt Pattern Engine, It will not work on the 80mm Bolt Pattern.
  • 2.Inner Diameter of Cylinder: 52.4mm and Outer Diameter of Piston Pin: 15mm.
  • 4.Include Cylinder,Piston,Piston Ring,Piston Pin,Piston Pin Clip,Valve Oil Seal,Gaskets,Tensioner Gasket,Exhaust Gasket,Intake&Exhaust Studs,Exhaust....
Check Stock

Exhaust With Muffler For Predator 196cc,212cc GX160 GX200

  • Fitment:For Mini bikes, go karts, generators, 196cc.212cc.
  • Package Include:1 x exhaust pipe, 2 x screws, 1 x gasket. 1 x Exhaust Muffler 1 x Explosion-proof nut.
  • 100% satisfactory service, if you have any questions, please feel free to contact us by email!We will solve it for you in the first time!.
  • Exhaust With Muffler For: Predator 196cc,212cc, GX160, GX200p.
Check Stock