ReviewsExhaust Pipe Adapters

Motorcycle Exhaust Pipe Muffler Tip Universal Muffler Stainless Steel Exhaust Pipe Muffler (Black)

◇【Works Universally】– The motorcycle exhaust pipe is a universal fitment product that will fit most motorcycles with 35mm-51mm diameter models.
◇【Many colors to choose】–This universal muffler exhaust pipe muffler tip has some different colors to choose, which can give your motorcycle a new look.
◇【High quality】–Muffler exhaust pipe use high quality stainless steel, which is durable, corrosion resistance and rustproof.
◇【Easy installation】– Stainless steel motorcycle exhaust pipe muffler only needs simple welding to fit pipe below 51mm, is very easy to install. But professional Installation is Highly Recommended.
◇【Quality warranty 】– We supply 90 days quality warranty. We will serve you within 24 hours whenever you have question on our Motorcycle Exhaust Pipe Muffler Tip, and we will take back your money if meet any quality problem, no worry about waste the money!.

Check Stock

V-Twin 30-0576 - Six Gun Exhaust Pipe End Set

Installation method: remove the old one and install the new one..
Note: We are a professional manufacturer of auto parts, if you have any questions, you can contact us at any time, we will answer you within 24 hours..
Bright decoration:The surface is polished, and the decorates your exhaust pipe, used to reduce the damage of automobile exhaust pipe due to long-term sewage and exhaust gas, and extend the life of exhaust pipe..
Durable:protect your original pipe from the sun and rain,avoid and deformation.Increase exhaust pressure and reduce exhaust noise effectively..
Replacement: Easy to use, no damage to the car, not easy to fall off, firmly installed on the car..

Check Stock

Carbon Fiber Exhaust Tip 3 Inch Inlet 4 Inch Outlet Burnt Blue 3 Inch Exhaust Tips Muffler Tip

【Purchase Guide】 Remove the exhaust tip from the original car and make sure the outer diameter of the exhaust pipe is 3 inch(77mm)..
【Universal fitment】The muffler exhaust end tip fits for most vehicles with a pipe diameter of 3.0 inch..
【High quality steel】 The 3 inch exhaust tip is designed with durable SUS304 stainless steel . Protect your original pipe from sun and rain. Avoid rusting and deformation..
【3K Carbon Fiber】 The shell of the 3 inlet carbon fiber exhaust tip is made with carbon fiber material, smooth and shiny, and resistant to high temperatures.Also can decorate the car, increase the beauty of the car, enhance the driving experience..
【Easy installation】 No welding and drilling required. just put the carbon fiber tail pipe on the car exhaust pipe and tighten the fixing device..

Check Stock

Motorcycle Exhaust Middle Pipe Muffler Mid-Pipe Adapter Link Connector for Honda CBR500R CB500X CBR400R CB400X

【Perfect Connect】The middle link exhaust pipe is a significant part for connecting with your tail pipe, makes your motorcycle to be more aggressive. Precision cast to make sure its easy installation and perfect fitment..
【Special Fitment】The exhaust middle pipe is designed for the Ninja 300 Z250 Z300 2013-2016 ,this exhaust link pipe is designed Fordrivers who need the highest performance of motorcycles, fashion design style, a great accessory to dress up your rides..
【Attractive Performance】The motor exhaust middle pipe is 100% brand new by professional manufactury ,it has good performance in reducing the exhaust noise and temperature,due to the perfect design, the pipe can make your motorcycle roar with outstanding sound and helps to obtain maximum output, increase the exhaust performance, you can directly replace your old or broken one without worry..
【Fashion and Stylish】The connect pipe can enhance the layering of the motorcycle with dazzling style, it's not easy to fall off and fade, provides beauty and practicality,the the pipe is stylish and stylish, with additional decorations,giving your motor a new outlook ..
【Warranty】Buy with confidence! We offer the 365-Day warranty and lifetime support. If you have any question on use, ....

Check Stock

Floshine 2.5 in Lap Joint Band Clamps,Exhaust Muffler Clamp 4 PCS，2.5 Exhaust Pipe Clamps preformed Stainless Steel

Application--2.5" Exhaust clamps are a simple and quick tool for connecting exhaust system components, such as exhaust pipes, mufflers and catalytic Flexible disassembly and assembly methods allow maintenance while protecting the exhaust pipe from being twisted.
No welding design--This 2.5 exhaust clamp is tightly fitted 360° to evenly withstand tensile forces and prevent deformation and leakage of the exhaust pipe.No welding design of Lap joint exhaust sleeve clamp makes installation and removal easier and faster.
Component parts--304 stainless steel band,steel gasket,aluminum alloy I-block and zinc-plated flange bolt and nut.Make sure that the stainless steel surface is tight against the exhaust pipe and the nut is tightened when installing.
Non-rusting and corrosion resistant--Floshine Exhaust clamp is used for 2.5" OD to 2.5" OD exhaust pipe,mffler,catalytic converters connection.Stainless steel material has good corrosion resistance and is not easy to rust, providing a longer service life..
WARRANTY--Floshine offers a 5-month warranty and we are committed to enhancing the user experience.Please feel free to contact us with any questions about the product.

Check Stock

Dual Exhaust Tips Muffler Tip Chrome Exhaust Tip Heart Shaped Car Muffler Double Tube Universal Stainless Steel Car Exhaust Muffler,For Fitment On Most Cars Sedans Suitable For 48mm-60mm Exhaust Tip

☻[High-quality material] We use the best 304 stainless steel to make the heart-shaped double-tube Exhaust tip,and the exterior adopts a sleek all-inclusive edge design.They have the advantages of high temperature resistance,resistance to rust,strong corrosion resistance and long service life.They can protect your original exhaust for a long time and completely cover and protect your original exhaust tailpipe..
☻[Production process] Exhaust nozzle surface polishing+color electroplating process design treatment, the inner cylinder of the exhaust nozzle is coated with special high-temperature coating, which has super corrosion resistance and exquisite craftsmanship, which can help you car The exhaust port has a smooth appearance. The exhaust tail pipe is suitable for pipes with a diameter of 48mm-60mm. Please measure the diameter of the pipe before purchasing..
☻[Easy to install/no need to drill] When installing the tip of the exhaust pipe,clean the surface of the old tip of the vehicle,and then only use a wrench to fix the 3 screws to the appropriate position of the exhaust pipe,and then firmly fix it after installation Fix it to the exhaust pipe of the original....

Check Stock

Roadformer 3 Lap Joint Exhaust Band Clamp Preformed Aluminized Steel

Roadformer 3" exhaust clamp is to joint 3" OD pipe overlapping into 3" ID pipe. It is fast, easy and accurate installation, also minimize noise and....
This stepped exhaust band clamp is made in high quality standard and using 12.9 degree high-strength fasteners to provide truly sealing force.
Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust....
Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening. The band steel is tested over 100....
Roadformer is dedicated in providing real value to our customers and end users. We set industry quality standard.

Check Stock

PVC Pipe Cutter Exhaust Pipe Cutter Tailpipe Cutter, Universal Chain Pipe Cutter Exhaust Pipe Cut Off Tool Copper Pipe Cutter Carbon Steel Cutting Pliers w/Non-Slip Handle

【Effectively Cut Tailpipes】 Work on tailpipes and exhaust pipes with diameters ranging up to 3.15"/83 mm. Get a clean cut with minimal rough edges or burrs on your exhaust pipe or tailpipe with our pipe cutters.
Cut tailpipe and exhausts on or off the vehicle with ease for making repairs or installing catalytic converters.
【Cut Pipes Easily】 Cut pipe with our pipe cutter tool in four easy steps.
Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut. Tips: Lubricating the exhaust cutter cutting wheels before use will give a more smooth cutting operation and extends the life of the item.
【Wide Application】The maximum cutting size is 0.09inches(2.5mm). This Pipe Cutter is suitable for cutting most low-carbon steel pipes, copper pipes and plastic (PVC, CPVC, PP, PEX, PE, rubber) pipes.
【Comfortable Grip】14.5 inch (37cm) exhaust pipe cutting tool has rubberized handles.
Cushioned for comfort and non-slip security.
【Withsatnd the Test of Time】This quality metal pipe cutter's cutting wheels were made of high quality 45# carbon steel, which won’t easily get dull. The head of the exhaust cutting tool won’t bend from duri....

Check Stock

FVRITO High Performance Exhaust Muffler Silencer Pipe Assembly kit for Honda CRF50 XR50 70cc 110cc 125cc SSR SR110 Rocketa Taotao DB14 DB10 xpro db-x20 SDG Coolster Chinese Pit Dirt Bike Motocross Red

[Stainless Steel Material]-- Exhaust muffler tail pipe tip, made of high grade stainless steel, durable in use, corrosion resistance and rustproof, added high-temperature coating process, high temperature and rust resistant and superior longevity, strong practicability.
[Universal Fitment]-- This motorcycle exhaust pipe muffler fits for most motorcycles, ATV and scooters with 51mm diameter exhaust pipes. Effectively reduces DB sound levels from louder aftermarket exhaust systems. Fashion design style, a great accessory to dress up your rides.
[High Quality & Attractive]-- Universal removable exhaust pipe muffler insert DB killer with premium quality. Crafted by professional manufacturer, strict factory QC test, trustworthy quality guarantee. Exquisite workmanship and fashionable design will enhance the look of your motorcycle.
[Easy to Install]-- The exhaust pipe silencer is a direct replacement for your original pipe, easy installation and perfect fit in. An add-on decoration to dress up your motorcycle. Helps your motorcycle obtain maximum output, ensuring its top exhaust performance.
[Service Guarantee]-- Brand new 51mm exhaust pipe muffler DB killer which makes the exhaust smoother and improve the power, five different sizes and types for your option....

Check Stock

OEMTOOLS 27045 Tailpipe Cutter, Features Pipe Cutter Chain w/ Cutting Wheels, Exhaust Pipe Cutter w/ Cushion Grips, Can Be Used as PVC Cutter or Copper Pipe Cutter

CUT ON OR OFF THE VEHICLE: Get a clean cut with minimal rough edges or burrs on your exhaust pipe, tailpipe, and when installing or making repairs on catalytic converters.
Keep well oiled, not for use on stainless steel.
EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
Lubricating the exhaust cutter cutting wheels before use will give an even smooth cutting operation and extends the life of the item.
EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps.
Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut.
NO POWER TOOLS NEEDED: Breaking out the Sawzall or angle grinder is unnecessary with our exhaust cutter tool.
Work in cramped spaces with one-handed rotation.
The cushion grip handles ease pressure on your hand while you increase your grip.
BUILT TO LAST: This quality metal pipe cutter's cutting wheels won’t dull easily during use.
The head of the exhaust cutting tool won’t bend from during rotation.
Lightly lubricate cutting wheels before use.

Check Stock

Stainless Steel Car Exhaust Tip, 2.5″ to 3.3″ Universal Car Exhaust Pipe Modification Tail Throat Tail Pipe, Steel Exhaust Tips Chrome-Plated Finish Tailpipe (Blue/A Style)

Durable Material: The exhaust pipe is made of solid stainless steel, which is firm and stable, not easy to fall off and avoid rust and deformation..
Stylish Design: The chrome finish gives your vehicle a stylish look, not only to decorate your vehicle, but also to effectively protect your exhaust pipe from dust, rain and sand, preventing deformation..
Size: The size of the tail pipe is 2.5″ x 3.3″ x 5.5″. It is suitable for most models with an exhaust pipe diameter of 2.1-1.5 inches on the market..
Easy To Install: use screw connection, loosen the screws on the tail pipe, put the tail pipe in the proper position at the tail of the car exhaust pipe, and then tighten the screws with a wrench. It’s easy to do it yourself in just 5 minutes!.
Package Contents: One exhaust pipe. If you have any concerns or questions, welcome to contact us via Amazon Mail, our team will reply within 24 hours..

Check Stock