ReviewsExhaust Pipe Connector

FILOL 2PCS Blue Aluminum Alloy Universal Car Turbo Whistle, Car Refitting Turbo Whistle Exhaust Pipe Sound Turbo Tail (L)

  • ✿After installed this product, the pressure blowing out of your exhaust will make your vehicle sounds like a turbo vehicle with the turbo system or blow off valve..
  • ✿Size Exhaust volume Exhaust Pipe Diameter S:10.26x5.25cm, M:10.3x5.9cm,L:11.6x6.3cm,XL:12x6.9cm.
  • ✿Made of durable material,anti-corrosion and wear resistance.Light weight.Easy to install on the car’s tailpipe..
  • ✿Beautiful appearance, very fashionable,it is the first choice for decorative car.Perfect match and make your car fashionable and unique..
  • ✿KEY: Turbo Sound Noise Exhaust Muffler Pipe Whistle - Aluminum Sound Exhaust Muffler Pipe Whistle Blow Off Valve BOV Simulator - Small to Extra Large Aluminum Alloy Universal Car Turbo Whistle Car Refitting Turbo Whistle Exhaust Pipe Sound Turbo Tail Turbo Sound Noise Exhaust Muffler Pipe Whistle - Aluminum Sound Exhaust Muffler Pipe Whistle Blow Off Valve BOV Simulator - Small to Extra Large.
Check Stock

Remflex 8053 OBX Exhaust Header Connector Gasket Set of 2 Model 8053 Outdoor&Repair Store

  • 1-3/4 inch pipe, header tube connector flange, 4-into-2/2-into-1.
  • Bolt hole spacing: (A) 4-5/8 inch x (B) 3-1/4 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not.
  • Remflex exhaust gaskets come in a standard 1/8 Inch thickness and are designed to crush 50 percent.
Check Stock

Universal Stainless Steel Motorcycle Exhaust Muffler Noise Sound Eliminator 51mm Exhaust Pipe Baffle Removable Silencer

  • [Effective Noise Reduction]:The universal removable exhaust pipe muffler effectively reduce the deep sound while reducing motorcycle noise pollution..
  • [Removable] 51mm motorcycle exhaust pipe DB silencer, suitable for most motorcycles, installed at the rear of the exhaust pipe, is a detachable adjustable muffler for easy installation..
  • [Low-noise tailpipe]: The exhaust pipe can increase the exhaust pressure, reduce the tail-end noise, make the exhaust smoother, improve the power, and provide you with a good driving experience..
  • [Stainless Steel] The exhaust muffler is made of high quality stainless steel, whichis resistant to high temperature and rust and can be used for a long time..
  • [Safety And Environmental Protection] During the riding process, the muffler at the end of the exhaust pipe can clearly hear the whistle of the vehicles around the road, which is conducive to safe driving and reduce noise pollution..
Check Stock

ABN Exhaust Pipe Expander Tool - Tail Pipe Expander Exhaust Expander, Exhaust Pipe Stretcher Kit 1-5/18 to 4-1/4 Inch

  • [Increase Engine RPM]: Expanding your tailpipe with the ABN Exhaust Tube Expander Tailpipe Expander Kit to increase exhaust volume and to give you more power for your engine.
  • [Easy to Use]: Lubricate all parts of the exhaust pipe bender stretch tool and attach correct sleeve.
  • Insert pipe spread tool into pipe, connect to existing drill, and expand.
  • Pipe might need to be warmed during winter months to prevent damage while using exhaust flare tool.
  • [Expand Most Metals]: Tailpipe expander tool kit great for all types of pipes, from aluminum to stainless steel.
  • Exhaust pipe expanding tool can expand piping from 1-5/18 to 4-1/4 inches (3.3 to 10.8cm).
  • [Easy Storage]: HVAC pipe expander parts come in a plastic storage case to keep the steel and copper pipe expander kit organized.
  • [Contents]: Exhaust pipe expansion tool kit includes a 3/4-inch and 1/2-inch (1.9 and 1.3cm) shank collet expander chuck, 5 expander sleeves, and 2 packs of black rubber O ring replacements.
Check Stock

Remflex 8053 OBX Exhaust Header Connector Gasket Set of 2 Model 8053 Car & Vehicle Accessories / Parts

  • 1-3/4 inch pipe, header tube connector flange, 4-into-2/2-into-1.
  • Bolt hole spacing: (A) 4-5/8 inch x (B) 3-1/4 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not.
  • Remflex exhaust gaskets come in a standard 1/8 Inch thickness and are designed to crush 50 percent.
Check Stock

Milwaukee 48-38-0010 Cutter Wheel 2-Pack Sold as 4 Pack

  • CUT ON OR OFF THE VEHICLE: Get a clean cut with minimal rough edges or burrs on your exhaust pipe or tailpipe with our pipe cutters.
  • EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
  • EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps.
  • Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw....
  • NO POWER TOOLS NEEDED: Breaking out the Sawzall or angle grinder is unnecessary with our exhaust cutter tool.
  • Work in cramped spaces with one-handed....
  • BUILT TO LAST: This quality metal pipe cutter's cutting wheels won’t dull easily during use.
  • The head of the exhaust cutting tool won’t bend from....
Check Stock

2pcs 45mm Black Stainless Steel Motorcycle Exhaust Can Muffler Insert Baffle Adjustable

  • 【Adjustable & Removable】Universal muffler removable silencer for motorcycles..
  • 【Universal Muffler】Motorcycle Exhaust Pipe Muffler can reduce sound. Quietly silenced, the bass is cut..
  • 【Applicable size】Fit 44- 46 mm Round Tip Mufflers. Outlet Diameter: 45 mm / 1.77 inch.
  • 【Durable Material】Motorcycle Exhaust Pipe Muffler is made of high strength stainless steel, very durable..
  • 【Fitment】for installation on the exhaust pipe tail exhaust pipe diameter size of 45 mm,if you don't know your exhaust pipe dia,please measure it..
Check Stock

ISTUNT Universal 51mm Slip-on Modified Motorcycle Exhaust Pipe Muffler

  • ✔ Dirt Bike Muffler Universal for Dirt Bike, Street Bike, Scooter, ATV, Quad and Any Other Bike with Pipe Diameter 38-51 MM..
  • ✔ Slip On Exhaust Fits for 400cc and Below Displacement. Removable DB Killer Offers Difference Sound Effect..
  • ✔ Attention: In Daily Use, Try to Avoid Water Entering the Exhaust Pipe and Keep the Exhaust Pipe Clean. Do Not Slam the Accelerator on the Spot for a Long Time and Resist Driving under Heavy Load, Which Will Cause the Color of the Muffler to Turn Blue or Yellow..
  • ✔ Attention: If the Exhaust is Modified, the Oil from the Carburetor Will Be Sprayed on the Exhaust Pipe When Riding a Motorcycle. If It is not Cleaned for a Long Time and Encounters High Temperature, the Exhaust Pipe Will Spout Fire or Even Burn..
  • ✔ The Body is Made of Stainless Steel Covered with Carbon Fiver Color Vinyl that Make the Exhaust Looks Luxury and Attractive. Manufacturer Warranty for 90 Days from Date of Purchase..
Check Stock

HVAC Duct Start Collar, 12\ Round Snap Together Sheet Metal

  • 4" Plastic inline round duct connector with backdraft damper..
  • Outside dimension of the duct fits 4" inch flex or solid ducting pipe..
  • Assembly: Press on chosen duct - flexible or straight - and use montage glue. tape or steel clamps tighten the connection..
  • Connect dryer duct, exhaust or any other duct that needs only one way airflow with this backdraft preventer to ensure required air direction, and remove polluted air from accessing habitable areas..
  • perfect for Heating. cooling or air conditioning - HVAC. bathroom and kitchen air exhaust. Heat-resistant from: 5 °F to 160 °F..
Check Stock

4PCS Car Exhaust Rubber Hanger, 2 Holes 11mm (0.43inch), Universal Exhaust Insulator Muffler Hanger, Muffler Bracket Bushing Mount(Black)

  • Universal Accessories: This rubber exhaust hanger fits most cars that use an easy-to-replace hanger system, consisting of two holes and a rubber-lined insulator bracket. Be sure to check the size and distance between the hooks before use to ensure the product is suitable for use..
  • Function: The high-density rubber muffler hanger effectively reduces the sound produced by the shaking and collision of the exhaust pipe. Reduce the height and contact surface between the exhaust pipe and the body to prevent the exhaust pipe from scratching along the ground..
  • Depth: 20mm (0.8") Bore: 11mm (0.43"). It is a universal vehicle tool for exhaust systems of cars, trucks, jeeps and SUVs. Be sure to measure the size before purchasing, so as not to be inappropriate for use..
  • Installation: First remove the muffler hanger from the exhaust system using the exhaust hanger removal tool. Then hang the new exhaust hanger on the mounting pegs attached to the chassis. Finally, hang the other end of the exhaust hanger on the mounting nail on the exhaust pipe..
  • What You Will Get: 4× rubber exhaust hanger, this rubber exhaust hanger is essential, and it can effectively reduce the sound produced by shaking and hitting the car....
Check Stock

2PCS Car Exhaust Rubber Hanger, 2 Holes 11mm (0.43inch), Universal Exhaust Insulator Muffler Hanger, Muffler Bracket Bushing Mount(Black)

  • Universal Accessories: This rubber exhaust hanger fits most cars that use an easy-to-replace hanger system, consisting of two holes and a rubber-lined insulator bracket. Be sure to check the size and distance between the hooks before use to ensure the product is suitable for use..
  • Function: The high-density rubber muffler hanger effectively reduces the sound produced by the shaking and collision of the exhaust pipe. Reduce the height and contact surface between the exhaust pipe and the body to prevent the exhaust pipe from scratching along the ground..
  • Depth: 20mm (0.8") Bore: 11mm (0.43"). It is a universal vehicle tool for exhaust systems of cars, trucks, jeeps and SUVs. Be sure to measure the size before purchasing, so as not to be inappropriate for use..
  • Installation: First remove the muffler hanger from the exhaust system using the exhaust hanger removal tool. Then hang the new exhaust hanger on the mounting pegs attached to the chassis. Finally, hang the other end of the exhaust hanger on the mounting nail on the exhaust pipe..
  • What You Will Get: 2× rubber exhaust hanger, this rubber exhaust hanger is essential, and it can effectively reduce the sound produced by shaking and hitting the car....
Check Stock