ReviewsExhaust Reducer Adapters

OCTANE™ Brushless 18V Jig Saw

... the latest upgrades, quality is super good.Christmas Gift for Dad/Father,Husband, Boyfriend, Men,DIY..
▶CR-V and black phosphate finish. Forged with heat treated chrome vanadium steel for superior strength, each adapter with corrosion-resistant black phosphate finish for against rust and corrosion. Detent ball on adapters provides a secure fit into the socket,reduces wear and prevents rounding off at corners,ensuring does not wobble while working..
▶【Multifunction-3Pcs】Used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool .It is a good accessory for conversion. for Universal Socket,Impact Adapter and Reducer Set,Universal Joint Set,Socket Adapter and Drive Reducer Set,Drive Impact Socket Extension Bar Set,Drive Impact Socket Set..
▶【Purpose-3Pcs】: This adapter set is designed to provide a securely locked in extension to your existing tool. Provides additional length to reach into a multitude of hard to reach spaces. The spring ball lock ensures a tight fit into the driver head to prevent slipping during use. Specifically machined to fit securely into a hand held driver, drill driver or impact wrench..
▶【Wide application-105°Right Angle....

Check Stock

NEIKO 00257 Socket Adapter Extension Drill-Bit Set, Includes 1/4-, 3/8-, and 1/2-Inch Drives, Made with CrV Steel, 9-Piece Extension Set, Includes a Magnetic Bit Holder

[QUALITY AND DURABILITY]: Impact grade drop forged and heat treated chrome vanadium steel construction with rust resistant black phosphate coating provide the tools with superior strength and longevity.
[SECURE LOCK]: Spring-loaded detent ball locks onto sockets tightly and securely to ensure safety for high torque tasks under impact and power tools.
[4-PC SOCKET DRIVE CONVERTER]: Easily change the drive of your impact wrench, ratchet handle or extension bar - include (1) 1/4” Dr. Female to 3/8” Dr. Male adapter, (1) 3/8” F to 1/2” M adapter, (1) 3/8” F to 1/4” M reducer, and (1) 1/2” F to 3/8” M reducer.
[3-PC SOCKET ADAPTER FOR POWER TOOLS]: Compatible with all brands of cordless impact drivers and power drills, and convert them to impact wrench or ratchet in seconds with featured 1/4” quick-change hex shank - include 3 adapters/extensions to cover all the common socket drive sizes of 1/4, 3/8 and 1/2 inch.
[LITTLE TOOLS SAVE BIG TIME]: Immediately convert the socket drive size up or down to fit your existing ratchets, wrenches, bars.
Easily adapt your current driver and drill to new impact wrench and ratchet.

Check Stock

Camera Mount Screw,ChromLives 1/4 to 3/8 Tripod Screw Adapter,1/4 to 1/4 Screw,3/8-20 Converter Thread Screw Adapter,Camera Hot Shoe Mount Adapter to 1/4 for Camera Monopod,Ballhead Flash Light,22Pack

Combo Pack: 22 Pcs Camera Screw Adapter - 5X 1/4" to 3/8" Reducer Bushing Screws.
Widely Application: These 1/4 inch camera screw adapters can be mounted on a wide range of different photography. The converter mount screws meet the....
Hot Shoe Adapter: Made of anodized aluminum metal, the bottom of hot shoe connects to the dslr/slr camera hot shoe, the top part of it is a standard....
Material : These 1/4"-20 tripod screw adapter camera mount are made of aluminium metal. Solid and durable..
Precision Made: These camera screw adapters are all with international standard screw type 1/4"-20 and 3/8" male and female thread. Suitable for most....

Check Stock

6 to 4 Inch Duct Reducer, Hon&Guan Duct Adapter 6 to 4 PVC Reducer, Duct Increaser/Reducer for Grow Tent HVAC Ventilation System. (150 to 100mm)

【6 Inch to 4 Inch Duct Reducer】: For connecting two ducting of different diameters or for connecting hose to inline fan/exhaust vent. Either flexible duct or rigid sheet metal ducts can be used and save you space..
【Size】: On one side there is a 150mm Female Spigot - Will fit into 6 inch ducting. Outer Diameter-6.18.

Check Stock

Bassani Xhaust O2 Port Bushing Adapters (18mm-12mm)

Threaded outer and inner adapters reduce O2 sensor port from 18mm to 12mm allowing riders to use our exhaust pipes on select newer-model motorcycles.

Check Stock

Edelbrock 7193 Performer RPM Intake Manifold

Intended for high-performance street or competition engines that run from 1, 500 to 6, 500 RPM.
Delivers maximum power with a broad torque curve for high-performance street applications.
Carburetor pad accepts square-bore carburetors without adapters.
Larger plenums and runners to match the free-flowing exhaust.

Check Stock

Dust Collection Fittings with Shop Vac Hose Adapter Accessories 4 in to 2 1/2 in plus 2 1/2 inch Vacuum Hose Adapter for Shop Vac Attachments In Your Work Shop Wet Dry Vac Attachment Exhaust Kit

Dust Collector Accessories for the everyday craftsman - Included are 3 different dust collection fittings for woodworking dust collection, vac adapters, vacuum hose adapters. Small dust collection system. See photos for detailed measurements..
Connect your 4" inner diameter hose to 2 1/2" dust collection hoses.*** NOTE: This cone reducer is designed to work with 4” and 2-1/2” hoses - It is NOT intended to fit or accommodate a 2.5 inch OD or 4 inch OD dust collection equipment port directly. A rubber coupler or a short section of hose will let you connect this adapter directly to your dust collection port..
2 1/2 in. Wet/Dry Vacuum Universal Tool Adapter Attachment - Made out of rubber this vacuum adapter can be cut to fit various sizes. Connect it to your wet dry shop vac accessories. If it doesn't fit apply some heat by running it under hot water. This will loosen the rubber and allow it to fit snug. Check the diameter i the photos to see what size your hose needs to be..
Use the shop vac attachment to connect more accessories to your dust collection system. The shop vac adapter dimensions are 2 1/2 to 1 1/4 inches. Fits most wet dry vac attachments but ***check photo for dimensions.***.
These 3 adapters can be used if you need a universal vac attac....

Check Stock

Sof Feet Callus Reducer 20 Pack Replacement Abrasive Screens

Reducer Screens are available in convenient packs 12 and 20 packs.
gently rub callused areas to remove hardened skin..
When the screen becomes filled with dry tissue, simply tap the reducer on a dry towel..
When the callus reducer screen does become worn, simply loosen the callus reducer thumbscrew and replace..

Check Stock

NEIKO 30249A Impact Adapter and Reducer Set | 5 Piece | Standard SAE Socket Adapter Sizes, 1/4, 3/8, 1/2\ | Cr-V Steel | Impact Driver & Wrench Conversion Kit | Socket Reducer, Locking Socket Adapters

IMPACT GRADE: This impact adapter reducer set has a specific impact grade design that is made exclusively for drivers, wrenches and ratchets to convert size up or down for your automotive needs in the garage. Square drive converter..
CHROME VANADIUM STEEL: This socket adapter set is constructed of heavy duty drop forged and heat treated chrome vanadium steel for superior strength and durability to exceed and endure in all work conditions..
BLACK OXIDE COATING: The super tough black oxide coating finish on these socket drill adapters gives you a long lasting tool set that will stand the test of time and give you the most durable performance job after job..
SECURE HOLD: The superior design includes a spring loaded ball detent that keeps your sockets locked into place and secure through holes that also allow the use of locking pins to ensure stability and supreme execution..
DRIVE BIT ADAPTER: 5 Piece set includes 2 reducers in 3/8” female to 1/4” male and 1/2” to 3/8”, also includes 3 adapters in 1/4" Female to 3/8” Male, 3/8” to 1/2”, and 1/2" to 3/4 Inch to convert all your impacts to different size sockets..

Check Stock

Brass Barb Reducer Fittings LIONMAX 1 to 3/4 Barb Hose ID Hose Barb Splicer Mender with 4 Hose Clamps for Air/Water/Fuel 2 PCS

【WITH HOSE CLAMPS】1'' to 3/4'' Hose barb reducer is suitable for connecting 1 inch ID hose to 3/4 inch ID hose. The package contains barb splicer reducer 2 PCS and 304 stainless steel hose clamp 4 PCS (size can adjust). You don't need to buy additional accessories..
【-65~250°F 150PSI】Brass barb reducer fitting has strong temperature resistance and good pressure resistance. So barb hose reducer is often used for water, fuel, oil delivery..
【SOLID BRASS MATERIAL】Barb splicer reducer is made of brass. Strong and durable, not easy to rust and corrode. Hose barb fitting has a long service life. NOTE: Brass barb reducer fitting is not suitable for potable water..
【WIDE APPLICATION】Barb hose reducer is suitable for pipe repair. Various hoses can be connected to this 1 inch to 3/4 inch ID hose barb fitting. Meet your multiple needs..
【TIGHT CONNECTION】This brass barb reducer is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed splicer reducer fitting not easy to leak during the connection process..

Check Stock

BOEN 8 Piece Impact Socket Adapter and Reducer Set, 1/4' 3/8' 1/2' 3/4' Drive Socket Adapter Set with Durable Case, Reducer Converter Adapter Set for Impact Driver Conversions

... socket adapter set, with convenient conversion and strong compatibility, can meet all your needs. Designed for drivers, wrenches and ratchets. It can be used with pneumatic tools, electric tools or driving tools..
【QUALITY GUARANTEE】 It meets ANSI standards. We provide 1 year quality warranty. All impact socket adapters have been rigorously tested to ensure the best performance and durability. If you have any questions, please feel free to contact us..

Check Stock