ReviewsExhaust System Flange Gasket

Dsnaduo 2-Bolt 3 Inch Exhaust Flange Connection Kit(Flange & Gasket) for Exhaust Turbo Downpipe Catback Headers Stainless Steel (77mm)

  • 2-Bolt Exhaust Flange Connection Kit Includes 1 Pcs Flange & 1 Pcs Gasket.
  • Hole Distance (B): 105~112mm, Sloted Hole.
Check Stock

WATERWICH Compatible with Catalytic Converter Nissan Altima 2.5L Sedan 2002 2003 2004 2005 2006 Direct-Fit Stainless Steel High Flow EPA Compliant

  • [ COMPATIBLE VEHICLES] - Compatible with Nissan Altima Base Sedan 4-Door 2.5L 2002-2006(Except 2005).
  • Compatible with Nissan Altima S Sedan 4-Door....
  • [ Direct Fit Design] - Flange to Flange Design, Direct Fit Design Bolts to Existing Exhaust without doing extra modification. And comes with gasket....
  • [Designed] - This is new OE fit catalytic converter. Outer shell Made from heavy-duty stainless steel construction for maximum durability. The....
  • [FUNCTION] - It is installed in the exhaust pipe of the engine. Through oxidation reaction, reduction reaction, water-based gas reaction and water....
  • [NOTE ] - Federal EPA compliant Appproved, Not for CA&NY(Non CARB compliant, Not legal for use on vehicles required to meet California emission....
Check Stock

A-Team Performance - Hex Flange Bolts LS Exhaust Flange Manifold Header Zinc Plated - Compatible with GM Chevrolet Chevy LS1 LS3 LS2 LSX LT Engines 551696 Bolt Kit Only Silver

  • Hex Flange Bolts LS Exhaust Flange Manifold Header Zinc Plated.
  • Compatible with GM Chevrolet Chevy LS1 LS3 LS2 LSX LT Engines 551696 Bolt Kit Only Silver.
  • GM LS / LT Engines (Gen III, IV, V). USA Grade 10.9 with LS Exhaust Manifold Bolts.
  • Zinc-Plated and 350 Header Gasket Set with Bolts.
Check Stock

2X 2.0' Inch Stainless Steel Butt Joint Exhaust Band Clamp Sleeve for Exhaust Pipes, Mufflers and Catalytic Converters

  • HIGH QUALITY : The band is made of non-magnetic stainless steel for long durability and reliability, zinc-plated M10 flange bolt and nut, steel gasket, aluminum alloy I-block..
  • ADVANTAGE : It is very easy to solve the problem of replacing a section of the exhaust exhaust tubing without loosening multiple sections of exhaust tubing to install the flared connection, and it will make the connection very firm and very tight..
  • FUNCTION : Great solution for connecting 2 pipes of the same diameter! 360-degree clamping of the exhaust tubing to prevent exhaust leakage and noise.
  • INSTALL EASILY : You only need to link two tubing of the same size, then tie the strap clamp to it, and finally tighten the two screws..
  • WHAT YOU WILL GET : Two 2in Exhaust Bands, 12-month warranty, whatever the problem about this item you have, please contact us..
Check Stock

Remflex 2008 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - 4.8L, 5.3L, 6.0L LS2 ('99-'08), 5.7L, LS1 LS6 ('97-'08), includes Vortec, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1440.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Quick Fix Exhaust Flange,Exhaust Flange Spring Bolt Repair Pipe Kit Quick Fix 2.25in ID to 2.25in OD Universal Stainless

  • Brilliant Compatibility:Exhaust Flange Spring Bolt Repair Pipe Kit,universal for most vehicles and can repair your car very well and effectively.2.25in ID to 2.25in OD exhaust spring bolt flange, used for connection between pipe ends..
  • Stainless Steel Material:Quick Fix 2.25in Exhaust Flange Made of high quality stainless steel material for perfect durability and strength, not easy to deform, has long service life..
  • Easy to Use:Exhaust Flex Spring Flange Easy to use with equipped springs and bolts, wonderful replacement for the previous old or broken one.Built to meet standard specification, strictly follow factory quality control..
  • Feature:Universal Exhaust Flange,Quick fix flange repair pipeline assembly, which meets strict quality control standards and can be used reliably..
  • Standard Specification:Exhaust Spring Bolt Flange Conform to strict quality control standards, dependable to use.Manufactured according to the original specifications..
Check Stock

Remflex 3003 Exhaust Gasket for Ford V8 Engine, (Set of 2)

  • 1-1/8 inch width x 1-1/2" height Stock Square Port.
  • Ford V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8" x 1-1/2" Square Port, Manifold or Headers, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Kashaipu Exhaust 3" Exhaust Collector Flange Oval 2-Bolts Flanges Manifold Muffler Connect Cat-back 3" Inch ID Pipe (3" inch)

Check Stock

Jones Exhaust AHB2

  • 3.00 Inch Header Buddy Collector Kit 3.00 Inlet 2.25 Outlet 3 Bolt Flange Jones.
  • 2 Flanges 2 Collectors and 6 Nuts and Bolts Included.
  • HEADER BUDDY Is An Innovative, New Design For Header/Exhaust Assembly That Requires NO GASKET.
Check Stock

Exhaust Flange Bolts, Quick Fix Exhaust Flange Exhaust Flange Spring Bolt Repair Pipe Kit Quick Fix 2.25in ID to 2.25in OD Universal Stainless Steel 2002 Tacoma Exhaust Flange Bolts

  • Application: Exhaust spring bolt flange is universal for most vehicles and can repair your car very well and effectively..
  • Standard Specification: Quick fix flange repair pipeline assembly, Exhaust Flange Pipe meets strict quality control standards and can be used reliably..
  • Excellent Quality: Universal Exhaust Flange is made of high quality stainless steel material for perfect durability and strength, not easy to deform, has long service life..
  • Easy to Use: Quick Fix Exhaust Flange is easy to use with equipped springs and bolts, wonderful replacement for the previous old or broken one..
  • Function: 2.25in ID to 2.25in OD exhaust spring bolt flange, used for connection between pipe ends..
Check Stock

2-Bolt 2.5inch 62mm Exhaust Flange Gasket Turbo/Manifold/Header Down/Dump Pipe Flange 5 PCS

  • Brand New Aftermarket Exhaust Flange Gasket, including 5 PCS 120-07610-0005.
  • Multi Layer Stainless Steel to Ensure Long Service Life.
  • Universal Fitment, suitable for Turbo/Manifold/Header Down/Dump Pipe.
Check Stock