ReviewsExhaust Tailpipe Tips

SODMLZ Car Accessories Heart Shaped Universal Car Exhaust Muffler Tip Stainless Steel Pipe Chrome Exhaust Tail Muffler Tip Pipe (Colour)

【Wide Application】Entrance: 2.4 inches, Exit: 3.6 inches, Total length: 6.4 inches,Universal fits 61mm/2.4inch Inlet diesel trucks pickup car tailpipe system.
【Illuminated Exhaust Pipe】 Fashionable and dazzling, high temperature resistant LED lamp, there will be blue flame effect after installation, and it is very cool at night.Creative design with LED lights can produce amazing visual effects. I believe you will fall in love with it..
High Quality】 The tip of the rear design with Durable stainless steel,strong corrosion resistance,High temperature resistance,during and waterproof ,save your energy and time.
【Easy Installation】No weld and drill needed. Just fix the screw to the appropriate location of tailpipe by Wrench.
【LOW NOISE】 Increase exhaust pressure and reduce exhaust noise effectively 【Tips:】 1. The distance between the tail throat and the bumper should be greater than 2cm to avoid burning the bumper at high temperatures. 2. Wear gloves during installation, just in case you are injured. 3. Do not install this product on a car that has just been stopp....

Check Stock

AUTOSAVER88 2.5 Inch Dual Exhaust Tip, 2.5" Inlet 3" Outlet 9.5" Long Chrome Polished Stainless Steel Double Wall Exhaust Tail Tip for 2.50" Outside Diameter Tailpipe, 2 1/2 Inch Exhaust Tip, Weld On

universal fits 2.5" outer diameter of trucks car exhaust tailpipe (please make sure the outlet outer diameter of your vehicle tailpipe is 2.5" before purchase).
Anti-deformation & rustproof: Built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
plus, a drainage hole helps drain water to prevent rust.
Stylish & pleasant-sounding: Sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound.
meanwhile, polished finish offer your car with a new & sporty appeal.
Easy installation: weld-on design, double layer wall, slant angle cut, rolled edge.
Daily Maintenance: To make this exhaust tip has a long-life service - Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).

Check Stock

Vechkom 2.5'' 63MM Inlet Carbon Fiber Car Exhaust Muffler Tip with Red LED Light Stainless Steel Muffler Car Exhaust Tip Modification Luminous Tube

【Wide Application】Entrance: 2.4 inches, Exit: 3.6 inches, Total length: 6.4 inches,Universal fits 61mm/2.4inch Inlet diesel trucks pickup car tailpipe system.
【Illuminated Exhaust Pipe】 Fashionable and dazzling, high temperature resistant LED lamp, there will be red flame effect after installation, and it is very cool at night.Creative design with LED lights can produce amazing visual effects. I believe you will fall in love with it..
【High Quality】 The tip of the rear design with Durable stainless steel,strong corrosion resistance,High temperature resistance,during and waterproof ,save your energy and time.
【Easy Installation】No weld and drill needed. Just fix the screw to the appropriate location of tailpipe by Wrench.
【LOW NOISE】 Increase exhaust pressure and reduce exhaust noise effectively 【Tips:】 1. The distance between the tail throat and the bumper should be greater than 2cm to avoid burning the bumper at high temperatures. 2. Wear gloves during installation, just in case you are injured. 3. Do not install this product on a car that has just been stopped or started to avoid being burned by the exhaust pipe..

Check Stock

Yonput 1 PC 2.5 Inch Inlet Exhaust Tip, 3.3" Outlet 5.7" Overall Length, Stainless Steel Black Powder Coated Exhaust Tailpipe, Rolled Angle Cut, Car Universal for 2.5" OD Tailpipe (Bending)

Dimension: 2.5 inch inside diameter inlet, 3.3 inch outside diameter outlet, 5.7 inch overall length. Please make sure the outside diameter of your car tailpipe is 2.5-inch before purchase..
High Quality: The stainless steel exhaust tail is made of high quality stainless steel with strong anti-corrosive, it effectively resist heat, rust and deformation to protect and decorate your tailpipe system well..
Stylish Design: Black powder coated surface treatment, high temperature resistance, not easy to scratch and fall off. Sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound..
Easy Installation: Bolt On Installation, not easy to screw off, no drilling or welding needed..
Maintenance Tips: Please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips to keep the surface clean..

Check Stock

ABN Exhaust Pipe Expander Tool - Tail Pipe Expander Exhaust Expander, Exhaust Pipe Stretcher Kit 1-5/18 to 4-1/4 Inch

[Increase Engine RPM]: Expanding your tailpipe with the ABN Exhaust Tube Expander Tailpipe Expander Kit to increase exhaust volume and to give you more power for your engine.
[Easy to Use]: Lubricate all parts of the exhaust pipe bender stretch tool and attach correct sleeve.
Insert pipe spread tool into pipe, connect to existing drill, and expand.
Pipe might need to be warmed during winter months to prevent damage while using exhaust flare tool.
[Expand Most Metals]: Tailpipe expander tool kit great for all types of pipes, from aluminum to stainless steel.
Exhaust pipe expanding tool can expand piping from 1-5/18 to 4-1/4 inches (3.3 to 10.8cm).
[Easy Storage]: HVAC pipe expander parts come in a plastic storage case to keep the steel and copper pipe expander kit organized.
[Contents]: Exhaust pipe expansion tool kit includes a 3/4-inch and 1/2-inch (1.9 and 1.3cm) shank collet expander chuck, 5 expander sleeves, and 2 packs of black rubber O ring replacements.

Check Stock

PVC Pipe Cutter Exhaust Pipe Cutter Tailpipe Cutter, Universal Chain Pipe Cutter Exhaust Pipe Cut Off Tool Copper Pipe Cutter Carbon Steel Cutting Pliers w/Non-Slip Handle

【Effectively Cut Tailpipes】 Work on tailpipes and exhaust pipes with diameters ranging up to 3.15"/83 mm. Get a clean cut with minimal rough edges or burrs on your exhaust pipe or tailpipe with our pipe cutters.
Cut tailpipe and exhausts on or off the vehicle with ease for making repairs or installing catalytic converters.
【Cut Pipes Easily】 Cut pipe with our pipe cutter tool in four easy steps.
Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut. Tips: Lubricating the exhaust cutter cutting wheels before use will give a more smooth cutting operation and extends the life of the item.
【Wide Application】The maximum cutting size is 0.09inches(2.5mm). This Pipe Cutter is suitable for cutting most low-carbon steel pipes, copper pipes and plastic (PVC, CPVC, PP, PEX, PE, rubber) pipes.
【Comfortable Grip】14.5 inch (37cm) exhaust pipe cutting tool has rubberized handles.
Cushioned for comfort and non-slip security.
【Withsatnd the Test of Time】This quality metal pipe cutter's cutting wheels were made of high quality 45# carbon steel, which won’t easily get dull. The head of the exhaust cutting tool won’t bend from duri....

Check Stock

AUTOSAVER88 4 Inch Inlet Exhaust Tip, 4' Inlet 6' Outlet 15' Long Chrome Polished Finish Stainless Steel Universal Exhaust Tail Tip for 4' Outside Diameter Tailpipe, Rolled Angle Cut, Bolt On, Silver

Dimension: standard 4″ x 6″ x 15″(inlet, outlet and overall length).
ONLY universal fit for vehicles with 4-inch outside diameter exhaust pipes (please make sure the Outside Diameter of your vehicle tailpipe outlet is 4.0″ before purchase).
Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
plus, a drainage hole helps drain water to prevent rust.
Stylish & pleasant-sounding: sleek degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound.
meanwhile, the chrome polished finished offer your car with a a new & sporty appeal.
Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M8 Allen Key, no drilling or welding needed.
Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).

Check Stock

AUTOSAVER88 3 Inch Inlet Black Exhaust Tip, 3' Inlet 4' Outlet 12' Overall Length Stainless Exhaust Tips Powder Coated Finish Tailpipe, Universal Fit for 3' O.D. Tailpipe, Rolled Edge, Bolt/ Clamp On

Dimension: standard 3″ x 4″ x 12″(inlet, outlet, and overall length).
ONLY universal fit for vehicles with 3-inch outlet diameter exhaust pipes (please make sure the Outer Diameter of your vehicle tailpipe outlet is 3″ before purchase).
Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
plus, a drainage hole helps drain water to prevent rust.
Stylish & pleasant-sounding: sleek 20-degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the Black Powder Coated Finish offer your car with a elegant and mysteriou appeal.
Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with M6 Allen Key, no drilling or welding needed.
Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).

Check Stock

AUTOSAVER88 3 Inch Exhaust Tip, 3' Inlet 4.5' Outlet 9' Overall Length Chrome-Plated Finish Tailpipe Stainless Steel Exhaust Tips for 3' O.D. Tailpipe, Rolled Edge Slant Angle Cut, Bolt On, Universal

Dimension: standard 3″ x 4.5″ x 9″ (inlet, outlet and overall length).
ONLY universal fit for vehicles with 3-inch outlet diameter exhaust pipes (please make sure the Outer Diameter of your vehicle tailpipe outlet is 3″ before purchase).
Anti-deformation & rustproof: built from high-grade stainless steel， our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
plus, a drainage hole helps drain water to prevent rust.
Stylish & pleasant-sounding: sleek degree rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound.
meanwhile, the chrome-plated finish would give your car a new & sporty appeal.
Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with M6 Allen Key, no drilling or welding needed.
Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).

Check Stock

AUTOSAVER88 2.5 Inch Inlet Exhaust Tip, 2.5' Inlet 4' Outlet 9' Overall Length Chrome-Plated Stainless Steel Exhaust Tail Tip for 2.5' Outside Diameter Tailpipe, Rolled Angle Cut, Bolt-On

Dimension: standard 2.5″ x 4″ x 9″(inlet, outlet, and overall length).
universal fits for vehicles with 2.5-inch outside diameter exhaust tail pipe(please make sure the outside diameter of your car tailpipe is 2.5″ before purchase).
Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
plus, a drainage hole helps drain water to prevent rust.
Stylish & pleasant-sounding: sleek 20-degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the chrome-plated finish offers your car with a bright shine and nice appeal.
Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with M6 Allen Key, no drilling or welding needed.
Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).

Check Stock

IFOKA Exhaust Tip 2.5 Inch Inlet 2.5 Inlet 2.5 Outlet 9 Long Black Exhaust Tips Turn Down Diesel Stainless Steel Powder Coated Finish Tailpipe Extension Bolt On Design Pipe Down

Dimension: Black exhaust tips 2.5" inlet, 2.5 inches outlet, 9 inches overall length. Universally compatible with vehicles which have exhaust pipes....
Material: Stainless steel with black powder-coated surface treatment, prevent corrosion, high-temperature resistance, and not easy to scratch & fall....
Easy to install: Before the installation, cleaning the tailpipe and exhaust tips are necessary. The bolt on design make it easy to install, and not....
Unique Driving Experience: Angle cut and turn down design, more thicker inner waller design makes the vehicle sounds rumble and crackle, give you the....
Rustproof Design: Angle cut on the bottom of the exhaust tip, not easy to accumulate water and avoid rust effectively. In order to prolong the service....

Check Stock