ReviewsExhaust Tip For Deep Sound

DNA MOTORING CBE-HP92-NRT Cat Back Exhaust System [Compatible with 92-96 Honda Prelude]

  • 【FITMENT】Compatible with 92-96 Honda Prelude.
  • 【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
  • 【Muffler & Diameter】4"(Od) rolled Muffler tip/ 3"(od) inlet/ 14mm thick double walled tips.
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check Stock

Yonaka 2.5" Performance Exhaust Compatible/Replacement for Honda Accord 98-02 4DR 4-Cylinder

  • Quiet, clean, and deep hum, without the irritating mid range raspy sound.
  • Direct bolt on fit to OEM, all installation hardware included, sound clip video available upon request.
Check Stock

DNA MOTORING CBE-NM00-NRT Stainless Steel Cat Back Exhaust System [Compatible with 00-03 Nissan Maxima]

  • 【FITMENT】Compatible with 2000-2003 Nissan Maxima.
  • 【Quality Construction】Made of 16-Gauge Aluminized Steel for Increased Performance to Value. TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
  • 【Muffler & Diameter】4" OD Sized Piping, 5" OD Polished Round Slant Rolled Muffler Tip.
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check Stock

Yonaka Performance Exhaust Compatible/Replacement for Honda Civic 92-95 3DR Hatch DX/Si Only

  • Quiet, clean, and deep hum, without the irritating mid range raspy sound.
  • Direct bolt on fit to OEM, all installation hardware included, sound clip video available upon request.
Check Stock

Yonaka Performance Catback Exhaust Compatible/Replacement for Honda Civic 96-00 3DR Hatch CX/DX Only

  • Quiet, clean, and deep hum, without the irritating mid range raspy sound.
  • Direct bolt on fit to OEM, all installation hardware included, sound clip video available upon request.
Check Stock

DNA Motoring CBE-AI942RS-NRT Stainless Steel Catback Exhaust System

  • Made of high quality T-304 Stainless Steel with computerized mandrel-bends for strength and durability.
  • TIG welded CNC machine flange for resistance against pressure and corrosion.
  • Aggressive deep and smooth tone sound while ensures smooth exhaust gas flow.
  • Dyno proven to instantly increase 15 to 25 horsepower or low end torque.
  • 4"(Od) Muffler rolled tip/ 2.25"(Id) inlet/ 2.25"(Id) main piping/ 14mm thick double walled Muffler tip.
Check Stock

DNA MOTORING CBE-HP97 Cat Back Exhaust System [Compatible with 97-01 Honda Prelude Coupe 2.2L]

  • 【FITMENT】Compatible with 1997-2001 Honda Prelude Coupe 2.2L.
  • 【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
  • 【Muffler & Diameter】Tip diameter: 4. 5" OD mm/ inlet: 2. 5" ID/ removable silencer included.
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check Stock

Exhaust Tip 3 inch Inlet, MONOKING 3 inch Exhaust Tip Stainless Steel Black Tailpipe for Truck Cars 3' Inlet 4' Outlet 12' Long Bolt On

  • EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
  • POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
  • DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
  • BOLT ON INSTALL – Holds up long time! Direct Bolt-on, it takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and tighten screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
  • PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and arrive within 2-3 days.
Check Stock

3 inch Exhaust Tip, MONOKING Black Exhaust Tip 3 inch Inlet Stainless Steel Clamp On Tailpipes for Truck Car 3″ Inlet 4″ Outlet 12″ Long

  • EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
  • POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
  • DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
  • CLAMP ON INSTALL – Holds up long time! Well thought out clamping mounting. It takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and clamps down tightly by tightening screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
  • PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and....
Check Stock

DNA MOTORING CBE-NM04V6-D-NRT Stainless Steel Cat Back Exhaust System [Compatible with 04-08 Maxima]

  • 【FITMENT】Compatible with 04-08 Maxima.
  • 【Quality Construction】Made of High Steel with Computerized Mandrel-Bends for Strength and Durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
  • 【Muffler & Diameter】4"(OD) Muffler Tip / 2. 5"(ID) Inlet / Removable Silencer Included.
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check Stock

Yonaka Stainless Steel Performance Catback Exhaust Compatible/Replacement for Honda Civic 88-91 EF 3DR Hatch Only

  • Quiet, clean, and deep hum, without the irritating mid range raspy sound.
  • Direct bolt on fit to OEM, all installation hardware included, sound clip video available upon request.
Check Stock