ReviewsExhaust Tip Mounting Bracket

Apeixoto 2.75 Inch Inlet Exhaust Tip 2.75 Inches Inlet 3.5 Inches Outlet 12 Inches Long Polished Stainless Steel Exhaust Tailpipe Tip Bolt On Design

  • Function: The Apeixoto exhaust tailpipe tip is used as a a proection to your vehicle’s exhaust pipes witn an outlet diameter of 2.75 inches. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain..
  • Dimensions: The Apeixoto exhaust tailpipe tip has a standard 2.75’’ x 3.5’’x 12’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 3 inches outlet diameter exhaust pipes..
  • Design: The Apeixoto exhaust tailpipe tip is constructed with stailess steel with polished surface. And the tip has a cut edge with nearly 20 degree cut. It makes your vehicle look much more shinny. And there is a little hole on button. It will help to drain water avoiding rust and corrosion..
  • Installation: Bolt on design and this tailpipe tip can be installed directly. Just make sure that this is is correct size for your exhaust pipes..
  • Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists..
Check Stock

Dart-Stop 29 inch Tan Octagon Pro Dart Board Backboard | Wall Protector | Dartboard Surround

  • TRUSTED QUALITY. EXPERIENCE | Built to the Highest Standard. Created to Last a Lifetime. Proudly Handcrafted in the USA Since 2004.
  • MORE THAN WALL PROTECTION | Enhance your Darts Experience. Improve your Dartboard Appearance. Symmetrical Dartboard Surround..
  • QUICK REGULATION HEIGHT | Just Two Measurements. Secure. Steel-Reinforced Wall Mounting Points. Easy, Clear Instructions. Hardware Included.
  • ENGINEERED to PERFORM | Sturdy 3/4 inch Thick Wood.
  • 1 inch Overall. Minimize Bounce-Outs. Plush No-Dart-Holes Fabric Finish. No Wood Finish to be Marred by Darts.
  • STEEL-TIP or SOFT-TIP DARTBOARDS | Pre-Installed, Recessed Metal Bristle Dartboard Bracket for Quick Wobble-Free Mounting. E-Dartboards: Install Screw(s) into the Face of the Backboard then Hang it using the Keyhole Slot(s) on the Back.
Check Stock

Big Gun Exhaust 09-24602 Series Titanium One Size EVO R Slip On

  • Red powder coated Stainless Steel end tip.
Check Stock

Dual Exhaust Tips Muffler Tip Chrome Exhaust Tip Heart Shaped Car Muffler Double Tube Universal Stainless Steel Car Exhaust Muffler,For Fitment On Most Cars Sedans Suitable For 48mm-60mm Exhaust Tip

  • ☻[High-quality material] We use the best 304 stainless steel to make the heart-shaped double-tube Exhaust tip,and the exterior adopts a sleek....
  • ☻[Production process] Exhaust nozzle surface polishing+color electroplating process design treatment, the inner cylinder of the exhaust nozzle is....
  • ☻[Easy to install/no need to drill] When installing the tip of the exhaust pipe,clean the surface of the old tip of the vehicle,and then only use a....
  • ☻[Product function and design] Exhaust tip is designed with two branches,one in and two out,used for Car exhaust tip,which can reduce the tail of....
  • ☻[Perfect compatibility]The exhaust nozzle is suitable for exhaust nozzles with a diameter less than 48mm-60mm.Our exhaust nozzles are perfectly....
Check Stock

Tail Throat,Yctze Universal Exhaust Tip Tail Throat Glossy Carbon Fiber Red Pipe Straight 3.1in Inlet 4in Single Outlet Exhaust Tip for Cars

  • FEATURES: 6.4in total length, 3.1in inlet size and 4in outlet size, applicable to 2.9‑3.1in exhaust pipe.Please confirm whether this product is suitable for the exhaust pipe diameter of your vehicle before purchasing. exhaust tip for cars.
  • STAINLESS STEEL MATERIAL:Adopt superior stainless steel,corrosion-resistant, durable, not easy to be damaged during use, reliable in use, and long in service life. carbon exhaust tip.
  • CARBON FIBER LOOK:This Tail Throat adopts high quality carbon fiber, dirt-resistant, anti-corrosion and durable. adding luxury and elegant sense to it, not easy to fade.red inside, stylish and distinctive, upgrade the car appearance. red exhaust tip.
  • EXCELLENT PEFORMANCE:Enhance the power, providing smoother exhaust, improve driving comfort and experience. exhaust tip.
  • INSTALLATION METHOD: Easy to install, no complicated tools are needed, and the old one can be replaced directly, saving you time and energy. carbon fiber exhaust tip.
Check Stock

Mejiao Exhaust Hanger Removal Tool,Rubber Bracket and Exhaust Hanger Separation Exhaust Pliers,Compatible with All Exhaust Rubber Hangers

  • Our exhaust hanger removal tool is suitable for all imported and domestic car and truck exhaust systems..
  • Compared to ordinary pliers, our exhaust pliers are more convenient to use and do not need to worry about hurting your fingers..
  • This rubber bracket exhaust pliers, with support points and removal holes, makes it easier to remove the rubber bracket from the exhaust hangers, saving time and effort..
  • The operator simply squeezes the pliers handles to force the rubber support from the exhaust hanger to make a difficult job much easier..
  • Package: 1* Exhaust Hanger Removal Plier.With 6 months warranty..
Check Stock

ABN Exhaust Hanger Removal Pliers – 11In Rubber Exhaust Hanger Removal Tool Grommet Puller Muffler Rubber Hanger Plier

  • SERVICE YOUR EXHAUST SYSTEM: Use the ABN Rubber Hanger Pliers Exhaust Hanger Puller Removal Tool to remove the hanging bracket from the rubber hanger when servicing your vehicle exhaust system.
  • Spring-loaded muffler hanger tool pliers uses optimal leverage to separate parts for easy servicing and to protect your parts from damage.
  • OPTIMAL LEVERAGE FOR EASY USE: 25-degree offset handle and 2-inch (5.1cm) faceplate allows for a comfortable hold and optimal leverage when working in tight and hard to reach areas.
  • Compatible with most import and domestic vehicles that use exhaust hanger supports.
  • EASY TO USE: Place the faceplate against the rubber hanger around the metal bracket.
  • Align the 3/8 x 7/8 inch (.9 x 2.2cm) extension knob against the metal bracket then compress the muffler hanger pliers to push the bracket through the rubber hanger.
  • BUILT TO LAST: High carbon steel exhaust hanger pliers provide maximum strength, durability, and leverage.
  • Plier faceplate features .8 inch (2.1cm) opening to fit around your metal hanger brackets and against your rubber hanger grommet.
  • COMFORTABLE GRIP: 11-inch (27.9cm) long muffler hanger removal tool rubber hanger pliers feature 4-inch (10.2cm) rubber-dipped grip handles that provide comfort and a secure hold while yo....
Check Stock

Exhaust Pliers Hanger Bracket Removal Pliers Separates Rubber hanger Pliers Supports

  • - This tool can separate the rubber bracket from the exhaust hanger bracket..
  • - This tool is suitable for all imported and family car and truck exhaust systems supported by rubber hangers.（Works on all vehicles with rubber exhaust hangers.）.
  • - The operator only needs to squeeze the handles of the pliers to press down the rubber support from the exhaust hanger, making difficult work easier..
  • - This tool saves a lot of time for your work, avoids frustration and increases life expectancy..
  • - Package Included 1PC Exhaust Hanger Removal Pliers with Designated Item Box(See as first picture)..
Check Stock

3 Piece Equalizer Rearview Mirror Adhesive Installer Tool & Kit, Spring Latch Rearview Mirror Removal Tool JMR357

  • ...ing the mirror in place. Because this spring is hidden, it is difficult to release..
  • Rearview Mirror Installer Designed for re-installation of spring-loaded mirrors. To Use: Just set the upper jaw against the rearview mirror, put the nylon block against the rearview mirror mounting bracket and squeeze the handles. The mirror is forced quickly and easily onto the mounting bracket with little or no chance of breaking the glass..
  • Equalizer Rearview Mirror Adhesive Kit contains enough material to adhere 200 mirror buttons. Unlike most brands, ours has a brush-on primer instead of spray. The adhesive has a gel-like consistency to keep it from running down the windshield..
  • To use it, clean the glass and mirror bracket thoroughly. Brush the primer on the glass where the bracket will be installed and then brush the primer on the mirror bracket. Let the primer dry then apply two drops of the adhesive to the bracket..
  • When you are ready to install the rearview mirror bracket, be careful to place it exactly where you want it. TIP: Most technicians mark on the outside of the glass to....
Check Stock

Carbon Fiber Exhaust Tip 3 Inch Inlet 4 Inch Outlet Burnt Blue 3 Inch Exhaust Tips Muffler Tip

  • 【Purchase Guide】 Remove the exhaust tip from the original car and make sure the outer diameter of the exhaust pipe is 3 inch(77mm)..
  • 【Universal fitment】The muffler exhaust end tip fits for most vehicles with a pipe diameter of 3.0 inch..
  • 【High quality steel】 The 3 inch exhaust tip is designed with durable SUS304 stainless steel . Protect your original pipe from sun and rain. Avoid rusting and deformation..
  • 【3K Carbon Fiber】 The shell of the 3 inlet carbon fiber exhaust tip is made with carbon fiber material, smooth and shiny, and resistant to high temperatures.Also can decorate the car, increase the beauty of the car, enhance the driving experience..
  • 【Easy installation】 No welding and drilling required. just put the carbon fiber tail pipe on the car exhaust pipe and tighten the fixing device..
Check Stock

Dual Exhaust Tips Muffler Tip Chrome Exhaust Tip Heart Shaped Car Muffler Double Tube Universal Stainless Steel Car Exhaust Muffler,For Fitment On Most Cars Sedans Suitable For 48mm-60mm Exhaust Tip

  • ☻[High-quality material] We use the best 304 stainless steel to make the heart-shaped double-tube Exhaust tip,and the exterior adopts a sleek all-inclusive edge design.They have the advantages of high temperature resistance,resistance to rust,strong corrosion resistance and long service life.They can protect your original exhaust for a long time and completely cover and protect your original exhaust tailpipe..
  • ☻[Production process] Exhaust nozzle surface polishing+color electroplating process design treatment, the inner cylinder of the exhaust nozzle is coated with special high-temperature coating, which has super corrosion resistance and exquisite craftsmanship, which can help you car The exhaust port has a smooth appearance. The exhaust tail pipe is suitable for pipes with a diameter of 48mm-60mm. Please measure the diameter of the pipe before purchasing..
  • ☻[Easy to install/no need to drill] When installing the tip of the exhaust pipe,clean the surface of the old tip of the vehicle,and then only use a wrench to fix the 3 screws to the appropriate position of the exhaust pipe,and then firmly fix it after installation Fix it to the exhaust pipe of the original....
Check Stock