ReviewsExhaust Valve Brake

COMP Cams K12-600-4 Thumpr 227/241 Hydraulic Flat Cam K-Kit for Chevrolet Small Block

  • High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle..
  • 227/241 Duration at .050". 107 Degree Lobe Separation Angle. 0.479"/0.465" Valve Lift.
  • K Kits vary in their contents, but generally contain a camshaft, a set of lifters, valve springs, retainers, locks, valve seals, timing set, assembly....
  • Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note. Best with aftermarket converters....
Check Stock

Big Gun Exhaust 07-1132 ECO ATV Silver Slip On Exhaust for Honda,Brushed Aluminum with coated Black tip

  • Order Includes: 2x Intake Valves, 2x Exhaust Valves, 4x Valve Springs, 8x Valve Cotters.
  • We strongly suggest comparing the posted picture to the unit(s) that needs to be replaced..
Check Stock

Tanstic 16Pcs Tire Tread Depth Gauge and Brake Lining Thickness Gauge Set, Come with Tire Pressure Gauge and Tire Valve Caps

  • ☀[Package Includes] You'll get 1 set of brake lining thickness gauge(8pcs), 3pcs tire tread depth gauge, 2pcs tire pressure gauge and 10pcs tire valve caps..
  • ☀[Brake Lining Thickness Gauge] Brake lining thickness gauge is designed for detecting the thickness of brake pads quickly and accurately. And the purpose of color coded design is to match SAE or Metric recommendations for effective and efficient brake pad measurement..
  • ☀[Tire Tread Depth Gauge] Tire tread depth gauge can be used to measure tire tread depth accurately, and the color coded design can clearly distinguish the different phase of tire. Suitable for trucks, automobiles, motorcycles or other vehicles. You just need to put the tire tread depth gauge perpendicular to the tire surface, and then press down until needle touches the tire, and finally look straight and read the data horizontally..
  • ☀[Tire Pressure Gauge] Tire pressure gauge can be used to measure tire pressure accurately and it is designed with 45 degree angle single head for easy operation. You just need to twist off the tire valve cap, press the mechanical tire gage chuck to the valve, then the scale plate will slip out and you can read the tire pressure from the scale plate..
  • ☀[Tire Valve Cap] 10pcs tire valve caps ar....
Check Stock

labwork-parts Intake Exhaust Engine Valves for Ford Mazda 2.0 2.3 2.5L DURATEC DOHC 16V New

  • INTAKE VALVES: HEAD 35mm X STEM 5.5mm X LENGTH 103.5mm.
  • EXHAUST VALVES: HEAD 30mm X STEM 5.5mm X LENGTH 105mm.
  • You'll Receive 8x Intake Valve as Pictured 8x Exhaust Valve as Pictured 16x Valve Stem Seal as Pictured.
Check Stock

2Pcs Straight Aluminum Bare Cylinder Head Compatible with Chevy Small Block 302/327/350/383/400 SBC 200cc Intake 68cc

  • ▶️ High grade aluminum, bronze valve guides, hardened seats, advance port design for greater air flow.
  • ▶️ This head is 200cc intake runner with a 68cc combustion chamber, 68cc combustion chambers improve performance and retains stock compression on 1970 and earlier.
  • ▶️ Lighter than Iron Heads. Each Head weighs 10.33kg.
Check Stock

Engine Camshaft.585/.585 Hydraulic Roller Replace Part Number E-1840-P camshaft compatible with GM Chevy LS L92 L99 5.3L 5.7L 6.0L 6.2L 1997-2007 V8 LSx Sloppy Stage 2

  • ➽【Widely applicable】 Compatible with LS series 1997-2007 V8 engines, without AFM active fuel management. GM Chevy 1997-2007 LS L92 L99 5.3L 5.7L....
  • ➽【Valve lift】Camshaft intake valve lift: .585" exhaust valve lift: .585"..
  • ➽【Advertising duration】Advertising intake/exhaust duration: 283°/ 286°..
  • ➽【Duration parameters】Intake duration @ .050": 228°.
  • ➽【Applicable models】 Compatible with Chevrolet, year: 1997-2007. Tip: Not applicable to AFM engine..
Check Stock

PERRIN Blow-Off Valve Kit Red Compatible with Subaru WRX 2008-2014

  • ... Engines 2015‑2021. Perfectly matched, it is a perfect substitute for old or damaged discharge valve plugs..
  • Using this discharge valve plug allows you to discharge hot pressurization to the atmosphere, lower the inlet temperature and improve overall performance throughout the operating range. You can have a clean exhaust valve sound and better performance without recirculating hot air and introducing unwanted heat into the engine..
  • The drain valve plug is easy to install and easy to use. There is no need to install any tools, and the installation can be completed quickly within 15 minutes. First find the blow valve pipe joint, rotate the coupler to remove the blow pipe, then disconnect the BOV hose from the intake pipe, and install the VTA MOD into the pipe before the exhaust valve..
  • This VTA mod allows you to vent the hot boost to the atmosphere instead of recycling it and creating much hotter inlet temperatures. This will lower inlet temperatures and improve overall performance throughout the operating range..
  • The best part is you can have clean blow off valve sound and know you have the best performance without recycling HOT air and introducing unwanted heat into the engine..
Check Stock

Edelbrock 2172 Performer-Plus Camshaft and Lifter Kit

  • Kit includes a camshaft, hydraulic lifters, assembly lube and full instructions.
  • Intakevalvelift with factory rockerarmis 0.484 and exhaust valve lift is 0.510.
  • Intakecamlift is 0.280 and exhaust valve lift is 0.295.
  • Only stock ratio rocker arms should be used with the kit.
Check Stock

2 PCS Intake & Exhaust Camshaft Position Actuator Solenoid Control Valve 12655420 12655421 917-215 917-216 for GM Chevy Cobalt Malibu G5 G6 HHR Buick Pontiac 2.0L 2.2L 2.4L

  • ...-2004,CAMRY:2002-2006,HIGHLANDER:2001-2010,SIENNA:2000-2006..
  • Excellent quality-variable valve timing solenoid valve adopts the latest technology to adjust, reduce fuel consumption and improve efficiency. It can help the engine adapt to various speed changes, so that the engine has a wide range of intake and exhaust timing control and lift control.
  • Intention-variable valve timing solenoid can automatically fine-tune engine timing, so that the intake/exhaust camshaft in an advance or delayed position, the valve can be opened and closed in advance. Combustion will be more fully, exhaust will be more thorough.So as to achieve the role of fuel saving, the engine can work better..
  • Replace -when these situations occur, you need to replace the timing solenoid valve: check that the engine indicator light is on, the engine oil is dirty, the engine idling is unstable, and the fuel efficiency is reduced.If the VVT is not working properly, your engine will perform noticeably worse..
Check Stock

DIYAREA E-1840-P Camshaft Compatible with LS sloppy stage 2 camshaft LS LS1 Fit for 1997-2007 GM Chevy LS L92 L99 5.3L 5.7L 6.0L 6.2L V8

  • Compatible with : 5.3L 5.7L 6.0L 6.2L 1997-2007 GM Chevy LS-Series V8 engine.
  • Replace Part : E-1840-P , Not compatible with AFM/DOD ,There Are No Instructions Included in This Kit. Professional Installation Is Highly Recommended.
  • ls camshaft Intake Valve Lift: .585" Exhaust Valve Lift: .585".
  • Exhaust Duration @ .050": 230°, Lobe Separation: Intake: 108° Exhaust: 116°.
  • Advertised Intake/Exhaust Duration : 283°/ 286°.
Check Stock

Left & Right 917-211 917-214 Oil Control VVT Valve Variable Timing Solenoid Compatible with Avalon Sienna Highlander ES300 ES330 RX300 RX330 RX400H 3.0 3.0L 15330-20010 15340-20010

  • ...-2004,CAMRY:2002-2006,HIGHLANDER:2001-2010,SIENNA:2000-2006..
  • Excellent quality-variable valve timing solenoid valve adopts the latest technology to adjust, reduce fuel consumption and improve efficiency. It can help the engine adapt to various speed changes, so that the engine has a wide range of intake and exhaust timing control and lift control.
  • Intention-variable valve timing solenoid can automatically fine-tune engine timing, so that the intake/exhaust camshaft in an advance or delayed position, the valve can be opened and closed in advance. Combustion will be more fully, exhaust will be more thorough.So as to achieve the role of fuel saving, the engine can work better..
  • Replace -when these situations occur, you need to replace the timing solenoid valve: check that the engine indicator light is on, the engine oil is dirty, the engine idling is unstable, and the fuel efficiency is reduced.If the VVT is not working properly, your engine will perform noticeably worse..
Check Stock