ReviewsExterior Foundation Vent Covers

Simply Ming Stovetop Oven Cookbook

  • REPLACe YOUR OLD RV STOVE VENT FLAP: The Dumble RV Supplies Camper Range Hood Vent Cover in White is an injection-molded styrene plastic RV vent range horizontal exterior wall vent that can be used with forced ventilation on large outlet static exhaust range hoods in your RV, camper, travel trailer, or mobile home kitchen.
  • PERFECT SIZE: Requires 10.3-inch x 3.5-inch (26.2x8.9 cm) opening and 1.7-inch (4.3 cm) inlet flange collar length (depth that goes through wall).
  • 11.6-inch x 5.3-inch x 2.1-inch (29.5x13.5x5.3 cm) overall outside dimensions.
  • 10 total screw holes - top and bottom holes 3.75 inches (9.5 cm) apart (measurement center to center).
  • Ensure that the overall size of the vent and its flanges are correct.
  • INSTALL IN MINUTES: Remove your hood (4 screws that go up through hood into cabinet underside), draw outline of this RV range hood exhaust vent insert on interior wall where hood meets wall, drill holes through wall at the corners of the outline, saw outline from interior, tuck installation into wall, saw outline from exterior, caulk/tape (not included) vent frame, press vent into opening, secure vent with the included screws, reinstall hood.
  • KEEP OUT THE BUGS & ELEMENTS: Features an RV hood damp....
Check Stock

DIYMAG Strong Magnetic Floor Vent Covers for Standard Air Registers, 5.5 inch X 12 inch, 8Pack for Floor, Wall and Ceiling Registers, Home and RV, HVAC.

  • ✅CRAZY STRONG: What’s the point having a magnetic vent cover if it falls off every two seconds? Whether its weak magnets or rigid contours, or whether you have painted vents - some covers just don’t want to stick around. But Muscle MagVent Vent Blockers bring the Magnetic Muscle on all ceiling, wall, and floor vents..
  • ✅WHAT’S IN THE PACK? This is a set of 3 magnetic vent covers for ceiling vents, walls and floors. Each AC Vent Cover Sheet is 5.5 x 12” and can be easily cut to fit your vent. No need to fuss with pre-sized covers that may not even fit, because Muscle MagVent adapts to MANY vents!.
  • ✅WHY MORE MAGNETIC? Muscle MagVent Register Covers have more magnetism per square inch! We use a higher percentage of Ferrite in our rubber making, and then we make each sheet 2mm thick! Higher magnetic percentage and a thicker sheet means optimized stickability to any of your vents..
  • ✅GOT PAINTED VENTS? Many magnetic register vent covers don’t stick to paint. But Muscle MagVent sticks like a dream! So you can control air flow, direct specific heating or cooling to where you want, make use of unused rooms....
Check Stock

Empire Register Co, Vent Cover - 4x10 inch, Honeycomb Design, Brushed Nickel Finish, Heavy Duty Floor Vent Covers, Metal Damper Attached. Vent Covers for Home Floor only.

  • STEEL DAMPER ATTACHED - These vent covers for home floor have sturdy steel construction, powder-coated steel damper attached for durability, longevity, are smooth, shiny, and have no sharp edges. These air vents are crafted for long trouble free operation, rigid extra heavy duty to withstand constant walk on situations.
  • EXCELLENT AIR FLOW - The metal dampers in these air vent covers provide easy unrestricted air flow as compared to the ones with fragile plastic dampers. The metal lever of these heat register covers have sufficient resistance to keep the fins in position allowing you to direct the air flow as required.
  • EASY INSTALLATION - Simply remove the old register vent cover and place the new one in the standard duct opening. To determine size needed, measure air duct opening rather than old register. These vents are not suitable for ceiling or wall applications. No screws or tools are required to install these floor register covers.
  • QUALITY PACKAGING - The air register covers are very carefully first shrink wrapped, then bubble packed, and finally backed with cardboard to prevent any damage during transit.
  • HIGH QUALITY FINISHING - These modern floor vents are crafted from 2mm thick steel, have very high quality lacquer coating to prevent any chippin....
Check Stock

DLOVEG Rear Window Louvers Compatible for Honda Civic Sedan 2021 2020 2019 2018 2017 2016 Sport Style Air Vent Scoop Cover Exterior Accessories Compatible for 10th Gen Civic Carbon Fiber Pattern

  • 1. Compatibility: The window louvers are only compatible for 10th Gen Honda Civic Sedan/Sedan Si 2016 2017 2018 2019 2020 2021, please check your car....
  • 2. Function: Decorate exterior appearance of your car, sport style design, make your car more sporty and stylish..
  • 3. Material: Those air vent louver made of ABS plastic, not easy to deform and fade, long service life, smooth surface, good gloss.
  • 4. Easy to install: With double-sided tape, the air vent scoop covers can be easily placed on the window without any tools, no damage to the car.....
  • 5. Warranty: 1 year warranty, any questions about products or orders, be free to contact us at any time..
Check Stock

4 Inch Through-Wall Ventilation kit - Adjustable - Louvered Dryer Vent Hood with Pipe and Duct Connector - White - Plastic - with Built in Fly Screen Mesh (Style 1 with 4'' Inch)

  • ☛【Durable Stainless Steel Material】The exterior wall Durable Stainless Steel Material. The exterior wall vent hood is made of 304 stainless steel material, durable, anti-rust and corrosion resistant..
  • ☛【Automatically Open and Close thru Blow】The air vent duct grill can easily open the flaps when any pressure is applied from the inside. While it will shut the louvers when the dryer stop pushing hot air thru the vents. It helps to keep the draft from coming thru the vents during the cold days ..
  • ☛【Weather and Pest Proof】 Louvers of the air vent are especially designed to prevent water from entering your home, and with a stainless steel louver protect you from annoying rodents like mice, rats, birds, and squirrels..
  • ☛【Easy Installation】 Inserting the tube into the air vent grille cover, then you only need to mount it on the wall with screws or silicon seal..
  • ☛【Multiple Usages】The exterior wall ventilation cover is ideal for vent pipes / hoses, bathroom vents & extractors, air conditioning units, kitchen fans & vents, all home wall vents, heat tran....
Check Stock

ECOTRIC SS Style Black Bonnet Hood Vent Scoop Covers Compatible With 2016-2020 Chevy CAMARO 1LT LT RS

  • Compatible With 2016-2020 Camaro LT 1LT 2LT RS Models. Decorative Vent Covers Only, Won't Fit SS Model or ZL1 Model..
  • Easy Installation With Double Sided Tape.
  • No modification is needed to hood or engine bay. Add sporty accent to the front end instantly. Gives the SS style look to your Camaro..
  • Made of Super Light Weight and High Temperature-Resistant PP material. Performance tested for extreme weather conditions, cold, heat, vibration and impact..
  • Package Includes : A Pair of Decorative Hood Vent Covers (Left and Right Sides) Instruction is not included..
  • Color: Unpainted glossy black surface. You can Paint it to The Color to Match Your Personal Preference. Note: This is Decorative Vent Covers Only, It's Not Actual Vent. Won't Fit SS or ZL1 Model.
Check Stock

BUILDMART - 8x4 Modern AC Vent Cover - Decorative White Air Vent - Standard Linear Slot Diffuser - Register Grille for Ceiling, Walls & Floors - Texas

  • Commercial grade solid aluminum with modern architectural design for ceilings, walls, and floors. This model can be used as a supply vent cover and return vent cover – This is a non-filter model.
  • Our vents are perfect for bathrooms, kitchens, and living rooms and can be used to update your office setting or commercial space. Update any room with our modern ac vent covers.
  • Cfm: 142 ft3/min – effective velocity: 9.8 ft/s.
  • neck: 7 13/16″ x 3 7/8″ – face: 9 3/4″ x 5 3/4″ (The neck is the section that goes into the vent hole while the face is what will actually cover).
  • Use our modern ac vents covers for your office essentials, home improvement, or remodels. Adds value to any wall, ceiling & floor space by updating not only the look but also the feel.
  • This is a design and utility patent pending product* We make all sizes from 6×4 to 30×24 standard sized modern ac vent covers for the modern day home.
Check Stock

Dryer Vent Cover Metal Dryer Vent Cap Exterior Wall Vent Hood Stainless Steel Air Vent Grille Cover Wall Duct Ventilation Grill Fan Outlet Airflow Vent Replacement Hood with Weather Proof Louvre

  • ☛【Durable Stainless Steel Material】The exterior wall Durable Stainless Steel Material. The exterior wall vent hood is made of 304 stainless steel material, durable, anti-rust and corrosion resistant..
  • ☛【Automatically Open and Close thru Blow】The air vent duct grill can easily open the flaps when any pressure is applied from the inside. While it will shut the louvers when the dryer stop pushing hot air thru the vents. It helps to keep the draft from coming thru the vents during the cold days ..
  • ☛【Weather and Pest Proof】 Louvers of the air vent are especially designed to prevent water from entering your home, and with a stainless steel louver protect you from annoying rodents like mice, rats, birds, and squirrels..
  • ☛【Easy Installation】 Inserting the tube into the air vent grille cover, then you only need to mount it on the wall with screws or silicon seal..
  • ☛【Multiple Usages】The exterior wall ventilation cover is ideal for vent pipes / hoses, bathroom vents & extractors, air conditioning units, kitchen fans & vents, all home wall vents, heat transfer and ventilation systems, gas & electric dryers, cooker hood extractors, as well as a wide variety of industrial uses..
Check Stock

12x4 Modern AC Vent Cover - Decorative White Air Vent - Standard Linear Slot Diffuser - Register Grille for Ceiling, Walls & Floors - Texas Buildmart

  • Commercial grade solid aluminum with modern architectural design for ceilings, walls, and floors. This model can be used as a supply vent cover and return vent cover - This is a non-filter model.
  • Our vents are perfect for bathrooms, kitchens, and living rooms and can be used to update your office setting or commercial space. Update any room with our modern ac vent covers.
  • Cfm: 133 ft3/min - effective velocity: 9.8 ft/s.
  • neck: 11 7/8" x 3 7/8" - face: 13 15/16" x 5 15/16" (The neck is the section that goes into the vent hole while the face is what will actually cover).
  • Use our modern ac vents covers for your office essentials, home improvement, or remodels. Adds value to any wall, ceiling & floor space by updating not only the look but also the feel.
  • *This is a design and utility patent pending product* We make all sizes from 6x4 to 30x24 standard sized modern ac vent covers for the modern day home.
Check Stock

10x4 Modern AC Vent Cover - Decorative White Air Vent - Standard Linear Slot Diffuser - Register Grille for Ceiling, Walls & Floors - Texas Buildmart

  • Commercial grade solid aluminum with modern architectural design for ceilings, walls, and floors. This model can be used as a supply vent cover and return vent cover - This is a non-filter model.
  • Our vents are perfect for bathrooms, kitchens, and living rooms and can be used to update your office setting or commercial space. Update any room with our modern ac vent covers.
  • Cfm: 162 ft3/min - effective velocity: 9.8 ft/s.
  • neck: 9 13/16" x 3 7/8" - face: 11 3/4" x 5 11/16" (The neck is the section that goes into the vent hole while the face is what will actually cover).
  • Use our modern ac vents covers for your office essentials, home improvement, or remodels. Adds value to any wall, ceiling & floor space by updating not only the look but also the feel.
  • *This is a design and utility patent pending product* We make all sizes from 6x4 to 30x24 standard sized modern ac vent covers for the modern day home.
Check Stock

BUILDMART - 14x14 Modern AC Vent Cover - Decorative White Air Vent - Standard Linear Slot Diffuser - Register Grille for Ceiling, Walls & Floors - Texas

  • Commercial grade solid aluminum with modern architectural design for ceilings, walls, and floors. This model can be used as a supply vent cover and return vent cover – This is a non-filter model.
  • Our vents are perfect for bathrooms, kitchens, and living rooms and can be used to update your office setting or commercial space. Update any room with our modern ac vent covers.
  • Cfm: 328 ft3/min – effective velocity: 9.8 ft/s.
  • neck: 13 5/8″ x 13 3/8″ – face: 15 3/4″ x 15 5/8″ (The neck is the section that goes into the vent hole while the face is what will actually cover).
  • Use our modern ac vents covers for your office essentials, home improvement, or remodels. Adds value to any wall, ceiling & floor space by updating not only the look but also the feel.
  • This is a design and utility patent pending product* We make all sizes from 6×4 to 30×24 standard sized modern ac vent covers for the modern day home.
Check Stock