ReviewsExternal Boring Tool

HGC BT30 Tightening Fixture CNC Tool Holder Tapers For BT30 Machine Tool Handle

For use with BXA tool posts 250-200 or 250-222. 10-15" swing..
Heavy Duty Boring Bar Holder to holds 3/4" tool with bushing, 1" diameter without bushing.
Equipped with a split bushing to accommodate a boring bar of smaller diameter.
Precision ground and hardened. Completely sealed for maintenance free operation.

Check Stock

ASZLBYM 3/4 Lathe Internal Boring Bar Turning Tool Holder S20R-MWLNR08 with Indexable Carbide Turning Insert WNMG432

♥package : 1pc S20R-MWLNR08 boring bar+ 10pcs WNMG432 carbide insert + 1pc wrench..
♥ S20R-MWLNR08 turning boring bar : the cutting direction：right hand , the turning tool bar is made of high-quality alloy steel with Nickel Cotated,which can effectively improve the wear resistance, corrosion resistance and stability of the turning tool bar, for long time use..
♥WNMG432 carbide insert : inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
♥The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..

Check Stock

OSCARBIDE 1/2 Round Shank 4 Pieces/Set Boring Bar Set,90 Degree with Indexable Carbide Inserts TCMT21.51 TCMT110204

OSCARBIDE Boring Bar Set ,1-1/4”to 2-1/2”Boring Depth ,7/16” to 1/2”Min Bore ,1-3/4” to 4” Overall length,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use.
Allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips.
Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post.
Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
Replacement insert for this kit ,please search the Asin of this item: B07Q2HNGVF to buy it.

Check Stock

Carbide Boring Bar, Boring Bar Holders Small Bore Inner Hole Turning Tool Tungsten Steel Carbide Boring Bar Φ12mm SHB25‑12

❤Stable: High accuracy, good clamping capability and stable retaining, can insure stable working of boring tool..
❤Design: Practical accessories of lathe inner diameter tools and small diameter CNC special tool..
❤Model SHB25‑12: Model SHB25‑12, means that the outer diameter is 25mm/0.98in, and the clamp boring tool diameter is 12mm/0.47in..
❤Tungsten steel: Manufactured from premium tungsten steel material, has high hardness, not easy to damage and corrosion..
❤Easy to operate: Fine workmanship, compact and lightweight lathes tools, easy to operate..

Check Stock

TJATSE 1/2\ Round Shank Boring Bar Set Premium Indexable Carbide Inserts with Boring Bars CNC Turning Lathe Tool Set for Metal Lathe - 4 Pieces/Set

【Industrial Quality Boring Bar Set】: TJATSE Boring Bar Set are made of Chilled Steel bar holders combine with Tin-coated carbide inserts, sturdy and durable for long time use. Great for semi-finishing on the existing hole cutter, fit boring machine, lathe machine..
【Round Shanks Bar Holder】: Designed with round shank holders which allow the operator to set positve or negative rake, chip breaker eliminates long stringer chips. Positive rake 90-degree lead. Supplied with wrench..
【Indexable Inserts Included】: Come with TCMT21.51 inserts and it can be indexed, when it is dull use another sided, a new cutting edge may be presented by simply indexing the insert. It is versatile and economical..
【Easy Organization And Storage】: Easy reference guide for insert number, screw and other accessories is printed on the tool shank, and The entire turning tool set is contained in a alumium carrying case that protects and organizes each tool and stacks and stores easily..
【TJATSE BRAND WARRANTY】: TJATSE provides an one-year no questions asked replacement warranty and friendly customer service. We aim to provide solutions for industry through both our products and professional service..

Check Stock

iCarbide 3/4 Shank Indexable Boring Bar 6pcs Set with 6pcs Carbide Inserts

Sclcr Boring Bar 1-1/2" Shank Diameter, Overall Length 14”.
Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
OSCARBIDE boring bars Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
CCMT120408( CCMT432) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
For semi-finishing and finishing operations.

Check Stock

Carbide Boring Bar, SHB25-12 Φ12MM Small Hole Inner Hole Turning Tool, Holdingers Φ12MM SHB25‑12, Premium Tungsten Steel Material, Compact and Lightweight

High accuracy, good clamping capability and stable retaining, can insure stable working of boring tool..
Practical accessories of lathe inner diameter tools and small diameter CNC special tool..
Model SHB25‑12, means that the outer diameter is 25mm/0.98in, and the clamp boring tool diameter is 12mm/0.47in..
Manufactured from premium tungsten steel material, has high hardness, not easy to damage and corrosion..
Fine workmanship, compact and lightweight lathes tools, easy to operate..

Check Stock

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
The cemented carbide material makes the turning tool durable and adaptable.
Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
cutting angle is 95 degree, cutting direction is right hand.
Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
Tight impact bolts, simple structure, often applied for small hole processing.
Note: due to the slight color change of manu....

Check Stock

Amana Tool 217013 Solid Carbide Dowel Drill Bit Through Hole Boring Drill Bits 3mm D x 70mm Long x 10x25mm SHK Right Hand

DOWEL DRILL BIT – The Through Hole Solid Carbide Dowel Drill Bit is designed to drill and bore clean holes through hard and soft woods..
DESIGNED FOR – This 3 mm boring bit for doweling allows you to create dowel joints with your handheld drill..
CREATE CLEAN HOLES – Use the dowel bit to create clean, straight, and accurately sized holes in wood..
SOLID CARBIDE-GRADE – Special solid carbide through hole boring bit made for long-lasting cutting edge performance and tool life..
INDUSTRIAL-QUALITY TOOLS – Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in industrial-quality cutting tools..

Check Stock

Accusize Industrial Tools Axa 8 Pc Wedge Type Quick Change Tool Post Set Including 2 Pcs Oversize Axa Style 1 Turning and Facing Holders, 0251-0118

Made of steel. Wedge Style Quick Change Tool Post, 0250-0111. Please be aware: The bottom plate of the tool post may need extra machining to fit your lathe..
Style 1: Extra XL Oversize Turning & Facing, 0250-0101T (2 pieces).
Style 2: Boring Turing & Facing, 0250-0102.
Style 7: Universal Parting Blades, 0250-0107 and Style 10: Knurling, Facing & Turning, 0250-0110.

Check Stock

Kings County Tool Portable Drill Guide Jig | Convert Hand Drill to Drill Press | Bore Up To 45-Degree Angles | 3/8-Inch Shaft and Chuck | 5-Degree Increments | Depth Stop Included

JUST USE YOUR DRILL – A hand-held drill now gets the control of a drill press with this steel and plastic jig.
BORING, IN A GOOD WAY – Angle boring up to 45-degrees is easily controlled and moved in 5-degree increments.
STANDARD SIZE – 3/8″ shaft and chuck are used for this quick tool conversion while it works smooth with no wobble.
PRECISE USE – A reliable depth stop is included to ensure each task goes as expected.
ADD TO TOOL CHEST – This drill guide makes a great addition to any tool chest and is portable for when necessary.

Check Stock